While we've reviewed many higher-end (and higher-cost) power supplies, we've neglected the lower power segment. We hope to address that omission with today's roundup of four units ranging from 400W to 450W. Not many manufacturers these days make units rated at less than 500W - especially if we're talking about high-quality power supplies. Seasonic - both on their own and as an OEM manufacturer - is one of the few companies that continue to supply this market segment. We recently tested Seasonic's 330W and 500W models and found they were more than capable of powering most decent systems. There are far more midrange and lower systems on the market than high-end systems, so we thought it prudent to look at several competing models from other companies.

The type of components used in a computer determines the power requirements for the system. If you want to build an extreme performance, highly overclocked computer then you will need a large (and high-quality) power supply. On the other hand, if you're mostly going to be doing office work, most of the "best" power supplies are complete overkill. In fact, even most higher-end systems rarely require more than 500W of power. So why do we have these 1000W+ PSUs? In a word: profit. Assuming you're not going to be running multiple graphics cards or a significant number of hard drives, one of the power supplies we're looking at today -- or something similar to them -- should be ideal.

Because of the potential for greater profits, power supplies with lower ratings are getting rare -- not many manufacturers that want to produce these units anymore. We talked to Silverstone not too long ago about a 300W version of their Element series. The conclusion was that the price for the production is similar to higher-end power supplies and it wouldn't make sense to build these power supplies anymore. That seems surreal when we think about the number of users that don't need more than 500W, but it appears that the minimum price for a quality power supply -- regardless of wattage -- has bottomed out at around $65. That's not to say you can't find cheaper power supplies out there, but the quality of such units is at best... suspect, as we will see shortly.

As usual, we are testing with our Chroma programmable loads to load each rail to a specific amount. This is important to get truly accurate results and not merely approximate values. We conduct tests in two different temperature environments. One is normal room temperature of 25-26°C, while the second environment goes from room temperature and increases steadily up to 50°C. Especially during the higher temperatures we will see how good the power supplies are and what whether or not they're truly worth your hard-won clams. Components inside will perform much worse at higher temperatures, but we expect any good quality PSU to deal with such test conditions without failing.

On the DC output graphics, we show the range of highest and lowest voltage. There is usually a bit of variance, particularly with multiple 12V rails, but with a PSU roundup we want to convey as much information as possible without simply bombarding our readers with graphs and charts. In essence, we will show the voltage range on each rail at various load points. This is especially easier to read and understand when you have multiple 12V rails since we will show them all in one graph together.

Note: If you would like to know more about our testing methodology, equipment, and environment, please read our PSU testing overview.

Antec Earthwatts 430W


View All Comments

  • Christoph Katzer - Tuesday, November 6, 2007 - link

    Yep, otherwise it's just getting too long and I thought actually nobody is too interested in that analyses anyway. Let me work something out for the next ones...

    Ripple is also coming today, I updated the 1200-1300 roundup already.
  • Super Nade - Tuesday, November 6, 2007 - link

    Good to know! I understand that it is going to take a considerable amount of work at the outset, to do a bit of design analysis, but once you have the popular topologies employed figured out it should be a lot less work.

    The length of the review is unimportant if it makes an interesting read. (Hypothetical example) Having 10 pages on the fans employed is going to be be boring. Since you have a wide audience with varying degree of technical appetite, the length of the review should not matter if the content is arranged appropriately.

    Best wishes,

  • floffe - Tuesday, November 6, 2007 - link

    When referring to the 8800GT article, it'd be nice to point out that those 327W from the wall was with SLI. A single card didn't get much over 200W, so even the Ultra should be able to run that, however horrible it otherwise is a a PSU.

    As for the market, I just wish someone would produce a high quality 300W modular PSU. That'd be plenty for my needs.
  • xsilver - Tuesday, November 6, 2007 - link

    Would you be ok if they charged you the same as a 400w PSU? because for the manufacturers, they're not going to the trouble of making another PSU that costs them almost exactly the same to make.
    (its like asking for a car with only 15hp because thats all u need ;)
  • jonnyGURU - Tuesday, November 6, 2007 - link

    Exactly. The cost difference at that level is rarely more than a $1. So if it costs me $30 to build a 400W, and $29 to build a 350W, etc. why would I bother? Reply
  • Souka - Wednesday, November 7, 2007 - link

    maybe because some people "think" a 350w power supply consumes 50w less than a 400w power supply...

  • Hinkdog - Tuesday, July 21, 2020 - link

    My 430 watt Antec Earthwatts that I bought in 2008 just failed. 12 years, pretty cool. Guess the 80mm fan didn't hurt its longevity. I know no one is going to read this in 2020 but wanted to post it anyway. Reply

Log in

Don't have an account? Sign up now