More Efficient Transistors

The basic function of a transistor as found in modern day microprocessors is to act as a switch with two states: on and off. When the transistor is on, current is allowed to flow from one terminal to the other (source to drain), and when it is off current shouldn't flow. Making enough current flow when it should and minimizing the amount that flows when it shouldn't is one of the major hurdles to making smaller transistors that run cooler/faster.

Below we have a typical CMOS transistor diagramed and labeled:

The voltage present at the Gate and the Source will determine whether or not current will flow in the transistor. Intel's 45nm process makes significant changes to two of the components in this transistor diagram: the gate electrode and the gate dielectric.

You can probably guess that as transistors get smaller, all of the parts of the transistor get smaller as well. The problem is that when some of these features get too small, they start behaving inappropriately. Case in point is the gate dielectric; with Intel's 90nm and 65nm processes, the gate dielectric was shrunk to a thickness of 1.2nm - the equivalent of about 5 atoms. The benefit of a very thin gate dielectric is that it increases the gate field effect, which increases drive current and reduces Source-drain leakage current. However, with such a thin gate dielectric electrons can tunnel directly through the layer and show up as leakage current - in other words, current would flow when it was not supposed to, translating into power wasted. On an individual transistor scale it's not such a big deal, but when you keep in mind that Penryn will have around 410 million of these transistors (820 million for quad-core) the leakage current/power draw does add up.

At 1.2nm, the gate oxide/gate dielectric in Intel's 90nm and 65nm transistors was as thin as Intel could make it without losing a great deal of power due to gate oxide leakage current. In order to make the move to 45nm Intel had to do something to thin the gate oxide without drastically increasing gate oxide leakage current.

Intel solved the gate oxide leakage problem by replacing the SiO2 gate dielectric with a material that has a higher k-value, in this case a Hafnium based material. A high-k dielectric here actually increases drive current at the same thickness as the previous SiO2 dielectric, while reducing gate leakage as well. Intel isn't disclosing how thick the Hafnium gate dielectric layer is in its 45nm transistors, but we do know that it is thicker than the 1.2nm SiO2 gate dielectric used in previous 90nm and 65nm transistors.

The second problem Intel is addressing with its 45nm transistors is a fundamental issue with the polysilicon gate electrode. The role of the gate electrode is important as it is what enables current to be driven through the transistor and as such it plays a role in how much current can be delivered. The polysilicon material that the gate electrode is made of has a tendency to form a region of depleted conducting carriers at the bottom of the gate, which reduces the drive strength of the transistor (less current flows when it needs to).

Intel's new 45nm transistors solve this problem by replacing the polysilicon gate electrode with a metal gate electrode, which completely eliminates the depleted region thus increasing the drive current.

Intel has been researching this High-k + Metal Gate (HK+MG) combination in transistors for a handful of years now, with hundreds of material options for metal gate electrodes and high-k dielectrics. The actual combination of high-k and metal gate material isn't being disclosed at this time, most likely to protect Intel's research and maintain the manufacturing advantage as long as possible. Intel expects that no other company will have HK+MG transistors until they reach 32nm or later.

The tangible advantages of these changes in materials in combination with the smaller 45nm process are quite large. According to Intel, the move from 65nm to 45nm yields a 30% reduction in transistor switching power because of the simple fact that smaller transistors have less parasitic capacitance and require less power to switch on and off.

Because of the combination of a high-k dielectric and the metal gate electrode, Intel is quoting a greater than 20% improvement in switching speed compared to its 65nm transistors. At the same speed as its 65nm transistors, there's a greater than 5x reduction in source-drain leakage power and a greater than 10x reduction in gate oxide leakage power; the latter is due entirely to the use of a high-k dielectric in the transistor. The end results of all of this are more power efficient processors, the first of which we should see by the end of this year.

Index Conroe has a Son: Introducing Penryn


View All Comments

  • Pythias - Saturday, January 27, 2007 - link

    Thats good. We don't want anyone in this race "doomed". Reply
  • stmok - Saturday, January 27, 2007 - link

    Agreed. We don't want to return to the era of a "one horse race" and prices are high!

    They must challenge each other and as the end-users, we cheer for falling of prices! :)
  • cornfedone - Saturday, January 27, 2007 - link

    When you've been getting your butt kicked for over two years by AMD and your response is to add cache to inferior CPU designs, everyone pretty much knows you're desperate for good press. Intel's 65nano hype is being closely followed by their 45 nano hype as the never ending Intel PR machine marches on. Intel knows full well that Barcelona will trump Clovertown so they are trying to convice the naive that Intel is the future and not to be swayed by AMD's superior CPU architecture ready to break cover. When all the hype is said and done you can expect AMD to be doing just fine thank you and still providing leading edge CPUs for the masses. Reply
  • verndewd - Sunday, January 28, 2007 - link

    the walk is the walk,Intel is dominating the perf turf.We all like to see equality in competition,but sometimes its not accessible.K8 had a great run,and it was an eyeopener for intel.At the same time i think its awesome to see intel flex their intelligence and dominate so decisively.I am an am2 user,I just love how this perf war is turning the tech world into an incredible battle of intelligence. Reply
  • Bonesdad - Saturday, January 27, 2007 - link

    Cramitpal? Is that you? Reply
  • shabby - Saturday, January 27, 2007 - link

    Can you post some barcelona benchmarks? Thanks. Reply
  • stmok - Saturday, January 27, 2007 - link

    cornfedone is the same weirdo that talks about putting hackers in jail when it comes to breaking DRM!

    Seriously, you have to be pretty passionate about AMD to say something like this.

    I personally don't care of brand. I flip-flop to any brand, as long as they meet my requirements on specifc roles.

    I usually I wait until Anandtech and TechReport starts publishing benchmarks before forming an opinion. (Although I wish they did more Linux articles!)
  • bamacre - Saturday, January 27, 2007 - link

    LOL, looks like some hasn't sold their AMD stock and moved their money into Intel. Better hurry. :D Reply
  • Viditor - Saturday, January 27, 2007 - link


    looks like some hasn't sold their AMD stock and moved their money into Intel

    I think selling AMD to buy Intel is a really bad is the opposite.
    Neither stock is going to go up for awhile, and they're both going to do the same as long as the price war continues...
  • bamacre - Saturday, January 27, 2007 - link

    I disagree. I predict Intel's stock to climb 80% in 12 months. Assuming no terrorist attacks, invasion of Iran. If somone nukes Nigeria, however, that number will be closer to 125%. Reply

Log in

Don't have an account? Sign up now