Gaming Performance & Power Usage - Continued

Our final gaming test is Half Life 2: Episode One, which provides us with another example of slightly lower performance of the new 65nm chip. The difference is less than 5%, so it could just be an unusually high variation between chips. If it isn't an issue with the benchmark then it could be a CPU problem, expected behavior, a BIOS tweak, or an issue with our test platform itself. Rest assured that as soon as we know more we will report it.

Gaming Performance - Half Life 2: Episode One

Power consumption under Half Life 2: Episode One is actually very good for the X2 5000+, due in part to its lower performance compared to the other AMD/Intel CPUs. The Core 2 Duo E6600 actually consumes the most power here, as it is also feeding the GPU the fastest out of all of the contenders. The higher performance still keeps it in the lead in terms of performance per watt, however.

Gaming Power Usage - Half Life 2: Episode One

Gaming Performance per Watt - Half Life 2: Episode One

Gaming Performance & Power Usage Temperature, Overclocking and Final Words
Comments Locked

63 Comments

View All Comments

  • Live - Thursday, December 14, 2006 - link

    It does not use more power then any other chip except the 90nm X2 5000+. Where did you get that from? Did you read the article?
  • Stereodude - Thursday, December 14, 2006 - link

    Yes, I read the article. Excluding the C2D it uses the 2nd most amount of power, basically tied with the 65W 4600+.
  • smitty3268 - Thursday, December 14, 2006 - link

    Not all the power that goes into a chip is released as heat. The heat is basically wasted power that "leaks." So if a chip can get more useful work out of the same amount of power then the amount of heat released would decrease even while power consumption remained steady.

    I'm not an expert, but I believe a lot of the special new process techniques we always here about (like strained silicon) basically just reduce the amount of wasted energy. Am I right here?
  • Stereodude - Thursday, December 14, 2006 - link

    Sorry, but that's incorrect. All the power is turned into heat. The power can't be going anywhere else. Power in = Power out.

    It's not like a LED where you get some energy out as light, or a motor where you get mechanical energy out of it in addition to heat.
  • finalfan - Thursday, December 14, 2006 - link

    If all the power can be turned into heat then it will be the most efficient heater the human being ever built. And even greater, you get all the computation done for free. Could you believe that?

  • Stereodude - Thursday, December 14, 2006 - link

    Where else is the energy going if it isn't getting turned into heat? You apparently don't have any idea how the transistors in a processor work.
  • splines - Thursday, December 14, 2006 - link

    You apparently don't have any idea about basic thermodynamics.

    If the processor released all of its energy in heat, it'd be the world's most efficient space heater.

    You have forgotten a few little points, like that work is done by a processor (wouldn't be much point otherwise). Transistors are switched, mostly, however the IC itself can expand and contract, as well as the packaging material. The heat generated by a CPU is because of the resistance inherent to the circuits. All of the above is considered energy expended (or, more properly, changed in state).

    In other words, don't go around insulting people's intelligence when you don't know yourself what you're on about.
  • Stereodude - Thursday, December 14, 2006 - link

    I'm betting only one of us has an Electrical Engineering degree, and guess what... You're not the one with it.

    The work being done by the CPU is what makes the heat. The transistors themselves create heat because they consume power, and a lot of it, to switch from one state to another at high speeds.

    I will say it again since you still don't get it, though it probably won't help. Energy is conserved. Electrical energy goes in, and heat comes out. The thermal expansion and contraction of the part isn't work. It's a side effect of the heat being product when the transistors consume electrical power by switching and make heat.
  • slayerized - Friday, December 15, 2006 - link

    Thermodynamics 101- First law of thermodynamics: “Energy can neither be created nor destroyed, it can only be converted from one form to another” (Power --> Heat)
  • smitty3268 - Friday, December 15, 2006 - link

    I think everyone here knows that, the issue is that current -> heat is not the only type of transformation that can occur. If it was then anything electric wouldn't be able to do anything at all except create heat, and obviously that isn't true.

Log in

Don't have an account? Sign up now