"Engineering is the art or science of making practical."

This quote by noted writer and practicing engineer Samuel C. Florman describes our initial thoughts about the ASUS P5NSLI motherboard. There has been much fanfare over the past few weeks surrounding the release of Intel's impressive Core 2 Duo lineup of processors. Up until now the only motherboards available that supported this CPU series have been sporting chipsets from Intel or VIA. (ASUS also offers the P5N32-SLI Deluxe SE which has Core 2 support, although that uses the older nForce4 chipset.) In fact, we are just now seeing additional Intel chipsets such as the 945P, 945G, 946PL, and 865 being launched, with the G965 and Q965 products on their way in September. After the wave of 975X and P965 products introduced at launch we are witnessing these products maturing from a performance viewpoint. Everyone has been wondering if, when, and what type of chipsets NVIDIA and ATI would bring to market to support Core 2 Duo.

We are over a week away from the official launch of the NVIDIA nForce 590SLI Intel Edition and will have to wait at least a month before seeing the ATI RD600 based motherboards. In the meantime, the first nForce 570SLI Intel Edition motherboard has been released and is for sale at this time. We just received the ASUS P5NSLI board a couple of days ago and immediately started testing it. Our testing is by no means complete but we did want to provide some early information on the board along with a few select benchmarks. We will be utilizing this board in an upcoming comparison article and will publish a performance review in the near future once we have completed benchmark testing.

The ASUS P5NSLI motherboard is based on the recently announced nForce 570SLI Intel Edition SPP (C19-A3) and MCP (MCP51-A2) chipsets. If these chipsets sound familiar they should, as the chipsets are based on the earlier nForce4 SLI XE for Intel Edition products. The SPP had been revised slightly to ensure full Core 2 Duo support along with minor performance enhancements. Our first impression of the motherboard was very good as the layout of the board is clean and well organized for an SLI capable system. The initial stock performance results of the board show it to be competitive with the Intel P965 and 945P solutions while offering a price target around US $115.

The chart above lists the standard feature set available when utilizing the NVIDIA 570SLI for Intel SPP and MCP chipsets. The 570SLI SPP enables full support for X16 PCI-E or dual X8 PCI-E graphics card configurations, up to four X1 PCI-E devices, 16GB memory addressability, and native DDR-2 667MHz memory support. The 570SLI MCP enables support for 8 USB 2.0 ports, HD Audio with S/PDIF connectors, Gigabit Ethernet support, 5 PCI slots, 4 SATA 3.0Gb/s ports, and 4 IDE devices.

NVIDIA nForce 500 Series MCPs for Intel
Chipset: NVIDIA nForce 590 SLI NVIDIA nForce 570 SLI
Segment: Enthusiast Performance SLI
CPU: Intel Socket 775
Core 2 Extreme
Core 2 Duo
Pentium D 9XX
Pentium D 8XX
Pentium 4
Intel Socket 775
Core 2 Extreme
Core 2 Duo
Pentium D 9XX
Pentium D 8XX
Pentium 4
Celeron D
NVIDIA SLI Technology: Yes - Two X16 Yes - One X16, two X8
FSB (MHz): 1066, 800, 533 MHz 1066, 800, 533 MHz
DDR2 Memory (MHz): 533/667/800 MHz + 533/667 MHz+
PCI-E - # Lanes 48 lanes 20 lanes
PCI-E - # Links 9 links 5 links
Configuration 16, 16, 8, 1, 1, 1, 1, 1, 1 16, 8, 1, 1, 1
SATA/PATA drives 6, 2 4, 4
SATA speed 3Gb/s 3Gb/s
RAID 0,1,0+1,5 0,1,0+1,5
NVIDIA MediaShield Storage Technology Yes Yes
Native Gigabit Ethernet Connections 2 1
NVIDIA FirstPacket Technology Yes Yes
NVIDIA DualNet Technology Yes No
Teaming Yes No
TCP/IP Acceleration Yes No
NVIDIA nTune Utility Yes Limited Support
USB ports 10 8
PCI Slots 5 5
Audio HDA (Azalia) HDA (Azalia)

The NVIDIA nForce 590SLI caters to the high end gamer and enthusiast while the nForce 570SLI is targeting the value performance sector for users interested in SLI capability. The 590SLI utilizes the C51XE SPP with the 570SLI utilizing the C19A SPP. The 590SLI uses the new MCP55 from the AM2 nForce 500 product lines and the 570SLI is utilizing the current MCP51. The major difference in the two products is the availability of dual X16 PCI Express lanes on the 590SLI compared to dual X8 PCI Express lanes on the 570SLI for SLI operation. The other differences reside primarily in the MCP with the 590SLI offering DualNet networking technology, two additional USB ports, and two additional SATA 3Gb/s ports at the expense of an IDE port. Now let's take a closer look at the features this board offers.

Basic Features: ASUS P5NSLI


View All Comments

  • Calin - Tuesday, August 22, 2006 - link

    I wonder if the FSB wall (the 320-321 MHz) the mainboard run into is real or an engineering trick... Conspiracy theory, but I think that the top-end chipset might reach a much higher FSB, luring overclockers to pay a handfull of dollars for the premium chipset Reply
  • Gary Key - Tuesday, August 22, 2006 - link


    wonder if the FSB wall (the 320-321 MHz) the mainboard run into is real or an engineering trick... Conspiracy theory, but I think that the top-end chipset might reach a much higher FSB, luring overclockers to pay a handfull of dollars for the premium chipset

    On the previous C19A boards we hit 268FSB with a Pentium 4. We were starting at a 200FSB level. We are now starting at a 266FSB and hitting around the 320FSB level which is actually lower from the base. The Intel NVIDIA chipsets have never been good overclockers and our sample will not even post past 325FSB. We are expecting our final NF590SLI sample this week so it will be interesting if there is a cap although I doubt it.
  • shabby - Tuesday, August 22, 2006 - link

    321 max fsb? Who in their right mind would buy this mobo when the gigabyte ds3 hits speeds over 500fsb? Reply
  • bob661 - Tuesday, August 22, 2006 - link

    Because this board costs $120 or lower and has more features (SLI). Not everyone OC's their motherboard. Besides, the DS3 has questionable stability. Why would I or other non-OCers would want to pay $140+ for a board (DS3) that has less features and less stability? Also, DS3's are NOT hitting 500 fsb regularly. A fortunate few are getting 500 fsb but not everyone. Reply
  • DigitalDivine - Tuesday, August 22, 2006 - link

    i thought asus would have phased out their signiture gold puke color by now. that board is probably the ugliest i've seen come out of asus, it's not subtle, but bright!!!! black is a very nice color... stick with black... or go platinum silver (i miss my soyo dragon)...

    the sad part in all of this is that their low cost subsidiary "asrock" offers a very tasteful blue color for their boards.


    This board will be excellent for when i buy a conroe though, maybe i'll wait to see what other manufacturers will be able to put out.
  • R3MF - Tuesday, August 22, 2006 - link

    why does the Intel version of the 570SLI have only 20 PCIe lanes when the AMD version of the 570SLI has 28 PCIe lanes? Reply
  • Gary Key - Tuesday, August 22, 2006 - link

    They are not utilizing the same chipset. The 570SLI for Intel Edition is just updated marketing language for the existing C19A+/MCP51(nForce 430). Reply

Log in

Don't have an account? Sign up now