Testing Conroe with eight motherboards and thirteen different 2GB memory kits taught us quite a lot about using Conroe as the center of a new system. The Core 2 Duo CPU is fast, cool, and generally easy to work with in every motherboard with every memory we tested. Most of our Reference systems have been based on AMD/AM2 for the last couple of years. To be honest, going back to some of those same systems after our Conroe testing, the differences are more obvious and painful than you might think. Conroe is clearly the faster platform - and not by small, barely measurable differences.

However, Core 2 Duo is not as mature as AM2 at this point, nor are there as many options currently available for building a system. Things like NVIDIA nForce 590 and ATI dual X16 are just not readily available, although we are grateful ASUS updated the nForce4-based P5N32-SLI for Core 2 Duo. The availability of Conroe parts will quickly change, however, because Conroe is clearly the top performing platform, and there are no obvious weaknesses in the Core 2 Duo performance suite. Manufacturers are rushing to fill the void and provide the options buyers want for Conroe.

The board we would choose for our own Conroe system is the ASUS P5W-DH Deluxe. Performance is rock solid and the feature set is superb. It is the best overclocker of the eight boards here and it is based on the 975X chipset, which allows the X6800 to be set to both higher and lower multipliers. You cannot set higher multipliers on the P965 and 965 overclocking is poorer on every board we tested than 975X overclocking. We could recommend the 965 if it were cheaper, but the ASUS P5W-DH costs $269 on-line, the ASUS P5B is the SAME price, and the Gigabyte GA-965P-DQ6 is $269. If you don't plan to aggressively overclock the Intel 975XBX is fast at stock and solid at about $250 to $260. The DFI Infinity 975X/G is also a very stable and solid 975X, but it has a hard overclocking wall at 385 FSB - a problem other major 975X board makers have worked around. At the current $249, the DFI price looks high for the features and performance it brings to the table. UPDATE - The DFI Infinity 975X/G is now available at pricing near $190 making this board an extremely attractive and great recommendation for those who do not expect extreme overclocking results.

With the slightly slower performance, multiplier problems, and poorer overclocking 965 has to be a good deal cheaper than 975X for us to recommend the current 965 boards, The Biostar TForce P965 Deluxe meets our requirements and provides excellent value with an online price of around $135. The Biostar is not quite as good an overclocker as the ASUS at 372 or the Gigabyte at 376, but at just 12 FSB lower (364 MHz) we can definitely justify paying half the price for the Biostar. Overall the Biostar P965 was very stable with average to above average performance among the 7 boards. As the cheapest 965 in the roundup the Biostar performed very well. There will be cheaper 965 boards from Gigabyte and others that will likely be good options to compete with the Biostar. Until we see much more from the P965 chipset than we now see, the P965 needs to be a good deal cheaper to be recommended.

The ASUS P5N32-SLI SE is the only board currently available that brings NVIDIA SLI to Conroe. That will be an important consideration for many. However, it is based on the older nForce4 Intel Edition chipset and suffers from very poor FSB overclocking when compared to the Intel chipsets for Conroe. On the other hand, if you plan to use an X6800 the ASUS P5N32-SLI SE does support higher multipliers and can likely take your X6800 wherever it can go on overclocking by adjusting multipliers instead of FSB. If you plan to use one of the locked Conroes (E6700 and below), you will not be happy with the limited FSB overclocking performance of the P5N32-SLI SE. nForce 500 Conroe boards will be out in August and September, and overclockability on Conroe should improve up to 10% over the P5N32-SLI SE according to NVIDIA. That's still a far cry from the 400+ overclocks some of the 975X boards are reaching, however. Overall, the board turned in some excellent performance scores and swept the 1600x1200 game benchmark results.

Last is the ASRock 775Dual-VSTA. What can you expect for $55? Actually the performance is pretty decent considering the board supports AGP 8X and PCIe only up to 4X. This should not be a real issue with a value system which would use a cheaper video card. It is also a real option for any remaining AGP video card owners. With this $55 board and an E6300, you can put together a value system with remarkable performance. Throw in 2GB of Value DDR2 for $120 to $147, run the system at DDR2-667 at the fast memory timings this board supports, include a good midrange GPU like the 7600GT, and you will have a value rocket. The ASRock is not the system to grow to top video with, but if screaming value is what you want the ASRock can deliver.

All six of the brands tested in High- Performance DDR2 were based on the latest Micron memory chips. All six reached DDR2-1067 and most also hit DDR2-1100 or higher. The real key here is the memory that can do 4-4-4 or near 4-4-4 timings at DDR2-1067. Those timings at DDR2-1067 can actually improve performance and make it worth running 1067 instead of running the DDR2-800 3-3-3 all of these DIMMs could run. Three of the memories stood out for slightly better timings, a bit more headroom, or slightly lower voltages required than the others. These are the Mushkin PC-8000 Redline, Corsair PC2-8500C5, and OCZ PC2-8000 Platinum EL. Any of the six memories will satisfy a high-end DDR2 buyer, but these three are the best of the best. At $400 to $450 for a 2GB kit the price is steep, but if you want the best DDR2 you can buy these should be your choice.

The Value DDR2 tests comparing seven 2GB DDR2 kits at less than $200 provided quite a few surprises. ALL of the seven brands reached DDR2-800 with a voltage increase to around 2.2V. This performance was a complete surprise for DDR2 memory kits rated at DDR-533 or DDR2-667. Most of the value kits also reached DDR2-800 memory timings of 4-3-3. This is only slightly slower than our High-Performance DDR2 group at DDR2-800 3-3-3. This means performance of this group is almost exactly the same at DDR2-800 or DDR2-667 as the High-Performance DDR2 - at less than half the price! We will have additional Conroe performance test results from this group in a future article.

If you want the absolute top performance in DDR2 you should still choose from the High-Performance group, but Value DDR2 on Conroe is shaping up to be remarkable in performance. Unless you have to have the absolute best, you can save $200 to $300 by buying one of these value DDR2 2GB kits instead. The Wintec AMPX 3AXD2675-1G2S-R and AData Vitesta ELJKD1A16K both stood out in this group by providing slightly better timings and/or slightly lower voltages than the others. They also cost $147 and $144 for a 2GB kit. ANY of the seven memories in this value roundup that are based on Elpida chips should perform similarly. We were not as impressed with Infineon chip value memory. The Infineon did mange lower voltages than the Elpida DIMMs, but at the price of slower memory timings. There is also the PQI PQI25400-2GDB memory, which at $117 with rebate is the cheapest we tested. It required a bit more voltage to reach the timings of the other Elpida value DIMMs, but if price is your guiding light $117 for 2GB of DDR2 that will do DDR2-800 is a steal.

We hope you had as much fun reading our Conroe Buyers Guide as we did putting it together. We learned a lot about Conroe in our testing and we hope you have learned something about what works well with Conroe and what doesn't in wading through this guide. We have already begun Part 2 of the Conroe Buyers Guide, which will take a closer look at heatsink/fans, power supplies, video, and storage options on the Conroe platform.

Value DDR2 (cont'd)


View All Comments

  • Gary Key - Thursday, July 20, 2006 - link

    Thank you for the comments. Our focus on the first cooler roundup will be on units that cost under $25 but the Tuniq will be included as a reference point along with the retail Intel unit. Our follow up will include the high end air coolers and some water cooling units.

    The Tuniq is considered to be one of the best air coolers available at this time although we are starting to see this design being incorporated by other suppliers quickly.
  • biggersteve - Tuesday, September 19, 2006 - link

    Hope you can get an Arctic Cooler Pro 7 into that cooler review. Quiet as a tomb and mighty cool. Reply
  • jonmcguffin - Thursday, July 20, 2006 - link

    A feature built into the Core 2 Duo processors is this new Digital Thermal Sensor that supposedly has the ability to provide much quicker and more accurate thermal information about each processor. The key with this though is that it requires support from the motherboard. Why did you guys not mention this feature in any of the motherboards you tested?

    My guess is that since the P965 was "built" for Core 2 Duo, my guess would be that it supports this feature while the older 975 does not. In going back and forth between pro's and con's of the P965, if this feature is in fact built into the chipset/motherboard, it is worth pointing out. I'm not really an overclocker though I do want to buy a system that will be rock solid in stability for many years to come. Quite PC's that are very reliable and stable are critical and this is a good feature.

    Also, you reviewed the Abit AB9 Pro motherboard a few weeks back but somehow it was left out of this overview. At $160 on the street, despite it's layout issue's, this looks to me like perhaps the best board right now for the guy who isn't rich and just wants a very solid Core 2 Duo mobo.

    Hope you get a chance to review and respond.

  • Gary Key - Thursday, July 20, 2006 - link


    The Gigabyte DQ6 actually has the ability to select readings from either sensor (Digital/Legacy) on the CPU in the power management settings. We will go over this in detail in our full review of the board or other Conroe capable boards in the future. These type of features along with audio and storage performance are not generally not reviewed in the guide articles but covered in the full product reviews.

    The Abit AB9-Pro is shaping up to be a very good mid-range board (prices around $142 already) once the bios is complete. We are due to receive bios B6 next week that is optimized for Conroe and allows full memory configuration from both a timing and ratio viewpoint. The board was not ready to be included in the buyers guide until Abit had a final bios to us. We will report the results as soon as we complete testing.
  • Wesley Fink - Thursday, July 20, 2006 - link

    We had planned to include the Abit AB9 in our roundup IF Abit got the memory issue fixed before the review. Unfortunately even the latest beta BIOS we received on Tuesday does not fix the issue. There is no means on the current Abit board to change memory speed or timings. It supposedly reads the SPD and boots at DDR2-533 5-5-5-15 with every dimm we tried. You can't run Value Ram at DDR2-800 for example or run DDR2-800 at rated speed. Or change timings to 3-2-3 at DDR-533 even if you know the ram can run at those timings. We did not think it fair to make a big deal of this in a review since Abit is supposedly working on it, but we see they are now also selling the board at some retailers and memory is still broken as far as we know.

    We consider this problem, if not fixed, to disqualify the Abit from consideration by any Enthusiast. We plan to do a full review of the Abit AB9 Pro if and when Abit fixes this major problem.
  • supremelaw - Thursday, July 20, 2006 - link


    Why would more accurate thermal sensors
    have high priority, if the Conroe runs
    much cooler and more efficiently?

    Are you planning extreme O/C, perhaps?

    Wouldn't a superior HSF have higher priority?


    Just curious here.

    Sincerely yours,
    /s/ Paul Andrew Mitchell
    Webmaster, Supreme Law Library">
  • falc0ne - Wednesday, July 19, 2006 - link

    The usual best from Anandtech..I was in a bit of fog if switching to conroe or not, but now I have a mutch more clearer picture. After the part2 of this suite, it will all be clear to me.
    P.S. Your articles on Nvidia's NForce 4 platform made me choose that platform and AMD64.

    My sincere thanks, I owe you a lot
  • wackypete - Wednesday, July 19, 2006 - link

    Thanks for putting this article together. Your effort has not gone unnoticed. Reply
  • Howard - Wednesday, July 19, 2006 - link

    Anybody know what chips it uses? The 5-5-5-15 DDR2-667 variety, that is. Reply
  • Gary Key - Wednesday, July 19, 2006 - link

    We still have additional memory selections from a variety of suppliers arriving for further memory reviews at this time. Reply

Log in

Don't have an account? Sign up now