Test Setup

Performance Test Configuration
Processor Intel Core 2 Duo E6700
(X2, 2.67GHz, 4MB Unified Cache)
RAM 2 x 1GB Corsair Twin2X2048-8500C5
Tested at DDR2-800 3-3-3 2.2V
Hard Drive(s) Hitachi 250GB SATA2 enabled (16MB Buffer)
System Platform Drivers Intel - 8.0.1.1002
NVIDIA - 6.86
Video Cards: 1 x EVGA 7900GTX - All Standard Tests
2 x EVGA 7900GTX - SLI on NVIDIA
1 x ATI X1900XTX - ATI Standard Tests on Intel
2 x ATI X1900XT (Master+Standard) - CrossFire on Intel
Video Drivers: NVIDIA 91.31
ATI Catalyst 6.6
CPU Cooling: Tuniq Tower 120
Power Supply: OCZ GameXstream 700W
Motherboards: ASUS P5W-DH Deluxe (Intel 975X)
Intel 975XBX (Intel 975X)
ASUS P5B Deluxe (Intel P965)
ASUS P5N32-SLI (nF4 SLIX16 Intel)
Biostar TForce P965 Deluxe (Intel P965)
Gigabyte GA-965P-DQ6 (Intel P965)
DFI Infinity 975X/G (Intel 975X)
ASRock 775Dual-VSTA (VIA PT880 PRO)
Operating System(s): Windows XP Professional SP2

Test conditions were maintained the same, as much as possible, over the platforms tested. For better comparison standard test results (1280x1024) were run with a single NVIDIA 7900GTX on all platforms. A single ATI X1900XTX was also tested at standard resolutions on the Intel 975X boards which support CrossFire. Consider this result a sanity check for single card performance and CrossFire. It should not be directly compared to other test results. Since SLI and CrossFire are not yet interchangeable, 1600x1200 4xAA/8xAF SLI was run on the single NVIDIA-based board with a pair of 7900GTX cards. 1600X1200 4xAA/8xAF CrossFire was run on the Intel 975X boards using a Master+Standard X1900XT CrossFire setup. All results are reported in our charts and color-coded for easier identification of results.

All Core 2 Duo benchmarking used Corsair PC2-8500 (DDR2-1066) 2GB kit at 3-3-3 timings at 2.2V. In recent months the memory market has moved from a 1GB kit to a 2GB kit being the common memory configuration. Our new DDR2 test standard is 2GB.

ASRock 775Dual-VSTA General Performance & Overclocking
Comments Locked

123 Comments

View All Comments

  • jonmcguffin - Friday, July 21, 2006 - link

    Actually, heck, I'm not much of an overclocker at all (I know that makes me the minority here). I'm looking at the Core 2 6600 at its native 2.4Ghz, 4Mb L2 Cache & 1066Mhz BUS Speed and figure that should be seriously fine for me.

    In regards to memory, I'd much rather purchase 2Gig's @ $180.00 than at $450.00 and since I'm not overclocking that shouldn't be a problem. But what I would have liked to have seen in this article were value sticks rated at DDR2 800Mhz as opposed to 667Mhz. So I anxiously await a "value-ram" roundup article of some sorts to not only show us what memory modules work well in the various mobo's but also which sticks can operate at those frequencies with low timing.

    Jon
  • Wesley Fink - Saturday, July 22, 2006 - link

    The Buyers Guide shows all the Value Ram operating at DDR2-800 at 4-3-3-3 at around 2.2V. We also show the timings and voltage of the value Ram at 667, 533, and 400, in addition to 800.
  • jonmcguffin - Sunday, July 23, 2006 - link

    Correct, but the ratings from the manufacture don't have those memory module's spec'd at DDR2-800. You were overclocking them essentially. Check out the

    Corsair 2Gb TWIN2X2048-6400 DDR2-800Mhz set. These two sticks are rated at DDR2, sell for $160 - $170 and run at 5-5-5-12-T1 timings at 1.9V.

    I would consider these a good starting point. Again, I'm not necessarily into running anything beyond the manufacture's claims, but for this price, it would seem these memory modules would fit the bill for a lot of users out there.

    Jon
  • Gary Key - Friday, July 21, 2006 - link

    All,

    I received a new beta bios from Abit today. I will be testing it later and will provide a quick update before we publish our final review on the board. Abit has spent considerable time this week testing this bios before release to us and hopefully it will fully address the memory setting issue we first reported in our preview issue.
  • perpetualdark - Friday, July 21, 2006 - link

    I dont know where you priced your motherboards for this review, but I purchased the DFI 975x/g on july 18th from zipzoomfly for $187. It shipped the next day and I should see it today or Monday.

    Given that the DFI board is available for $62 less than your article shows, I think I made a good choice, since I dont need to overclock or run any high end graphics.

    Now I just need to get my hands on a cpu. This is for a work computer, but after things settle out around octoberish I will upgrade my home gaming setup with the conroe. I am playing titan quest right now, and even with a geforce 7950 the game hitches quite a bit in certain areas at most resolutions.. I figure increasing the cpu power will help substantially, at least thats my excuse for upgrading.
  • Gary Key - Friday, July 21, 2006 - link

    The price was taken at the time the article written (17th) based on pricing from three different suppliers that had the board in stock. Now that ZipZoomFly (would assume others shortly) has it in stock at a price point (slightly below) that we had discussed with DFI I will update our article. The 7950GTX has not been qualified on this board yet so performance issues could occur since the required bios optimizations between the board and card are not completed. We really like this motherboard and for the $187 price, it is a great value now and one that should be seriously considered for purchase by early Core 2 Duo buyers. Although, we expected more in the way of overclocking, a very solild 375FSB is nothing to sneeze at and stock performance is excellent. Thank you for the price update! :)
  • Gary Key - Friday, July 21, 2006 - link

    Where is the edit button?

    a very solid.....
  • Roy2001 - Thursday, July 20, 2006 - link

    I am looking for OC a E6600 with 4MB cache to 4Ghz with minimum budget and I never OC my system. So I don't know which value board/RAM would meet the target. I don't care about timing/latency. I would like to see anandtech to publish guides for high performance OCers and value OCers and help us to reach max speed.

    In addition, I can pickup DDR2-800 RAM priced similar to those 667 RAMs, I don't understand why they are not included in review?

    Thanks.
  • Gary Key - Thursday, July 20, 2006 - link

    We will have additional guides in the near future. As for the DDR2-800 memory, we will be looking those modules in a mid-range section and a couple of the lower end that we have tested did not do any better than the high end DDR2-533/667 from a timing viewpoint or a high speed. Getting a E6600 to 4GHz is not that easy with a minimum budget but your suggestions are noted for the next guide. Thank you for the comments. :)
  • Roy2001 - Friday, July 21, 2006 - link

    I know minimum budget system won't be easy to hit 4Ghz speed. I am not too sensitive to the money, but I just don't want to spend $450 for best RAM while I can hit 4Ghz with $150 RAM. Same thing happens to motherboard. I don't care 1394 port, optical port, as long as it is stable @4Ghz, I just pick the lowest priced although I can afford a $250 mother board. Hope that helps as I think I am not alone. Thanks for your hard work!

Log in

Don't have an account? Sign up now