Battlefield 2 Performance

At the lowest resolution with and without AA, both the highest end ATI card we tested (the X1900 XT) and the NVIDIA 7900 GTX lead the 7950 GX2 in performance. In most other (non CPU limited) cases, we will see the new NVIDIA flagship part come out on top, but this is one case where the added overhead of multi-GPU management gets in the way. Hopefully anyone who has one fo these cards will also own a display that does much higher resolutions than 1280x1024.

Battlefield 2 Performance


Battlefield 2 Performance


Again, at 1600x1200 without AA we see the 7950 GX2 running into a CPU limitation. When 4xAA gets enabled, we see the 7950 GX2 jump to the front of the class. In fact, enabling 4xAA only causes the 7950 GX2 to drop an average of 2.6 frames per second from the non-antialiased benchmark.

Battlefield 2 Performance


Battlefield 2 Performance


Running at our highest resolution, both with and without AA leaves the 7950 GX2 solidly in the performance lead under BF2. It isn't surprising that the closest competitor is the 7900 GT SLI setup, followed by the X1900 XT. At the maximum quality setting, the 7900 GTX falls a stunning 36% (or 19.1 average fps) behind the 7950 GX2. Not every game delivers results this impressive, but BF2 is certainly a good title to perform well under.

Battlefield 2 Performance


Battlefield 2 Performance


One Card, or Two? Black & White 2 Performance
Comments Locked

60 Comments

View All Comments

  • Exsomnis - Monday, June 5, 2006 - link

    Since when did slapping two PCBs together = single card? *Confused.*
  • z3R0C00L - Monday, June 5, 2006 - link

    Marketing Gimmick...

    It's two GPU's. It's SLI. The Fastest Single VPU/GPU solution is the x1900XTX (not tested here).

    The most advanced GPU/VPU is the x1900XTX as well.

    I wonder if these crds will also suffer from the 50% failure rate other 7900 series cards suffer from.
  • Jojo7 - Monday, June 5, 2006 - link

    Haha. 50% failure rate. That's comedy.
    Where'd you pull that number from?
    Hardocp said BFG reported 3-5%, Evga reported .04-1.9%, XFX said in the last 2 weeks they reported a .5% (half of one percent) increase in RMA's.
    Yea. That seems like 50% to me.
  • Xenoid - Monday, June 5, 2006 - link

    50% failure rate might be bullshit but the fact that you completely ignored the other half of his message is also bullshit fanboy-ism.

    The X1900 XTX isn't on here. The X1900 XT Crossfire isn't on here either, but the 7900 GT SLI is. This review is missing 2 of the top video cards, and for what reason? It makes this review incomplete and this should be addressed.
  • Jojo7 - Monday, June 5, 2006 - link

    quote:

    50% failure rate might be bullshit but the fact that you completely ignored the other half of his message is also bullshit fanboy-ism.


    Actually, I agree with both of your points. The x1900 XTX should have been included in this review in both crossfire and single card. To the same end, the 7900 GTX in sli should have been included imo.

    Noise comparisons and power draws would have been nice as well.
  • DerekWilson - Monday, June 5, 2006 - link

    this does touch on our motivation --

    the 7950 GX2 is a single board solution (for those uncomortable with the inclusion of 2 PCBs, think of one as a daughterboard or something). We wanted to really focus on the comparison to other single board solutions.

    Right now x1900 crossfire and 7900 gtx sli are over $1000 investments, and don't really compete with the 7950 GX2 -- unless we look at the 7950 GX2 in SLI. As we couldn't get quad SLI on the 7950 GX2 working for this article, we decided we save the comparison to that copetition later. It does seem pretty clear fromt these tests that the 7950 GX2 in SLI will be able to trump any other solution in its market segment.

    Also, the 7950 GX2 doesn't require an SLI board -- which is a great advantage of current multi-GPU solutions. In many cases, putting two other solutions in SLI won't be an option for users who upgrade to a 7950 GX2.

    But

    Please understand that I certainly appreciate the requests for the inclusion of the 1900xt crossfire and the 7900 gtx crossfire as a reference point to what is currently possible on the highest end of the spectrum. In future articles involving the 7950 GX2 we will address this issue. Thanks very much for your feedback.
  • poohbear - Thursday, June 8, 2006 - link

    50% failure rate? dude, do u know how this percentage thing works?! that would mean 1 in 2 79XX cards fail. please, bs is a great thing and we have plenty of it on the net, but try to atleast make your bs somewhat believable.
  • nullpointerus - Monday, June 5, 2006 - link

    quote:

    50% failure rate might be bullshit but the fact that you completely ignored the other half of his message is also bullshit fanboy-ism.


    No, it isn't. They only wanted to reply to a particular point within his post.
  • Inkjammer - Monday, June 5, 2006 - link

    50% failure rate? Where are you getting those numbers from?
  • z3R0C00L - Monday, June 5, 2006 - link

    I got the number from polling various website forums.. including HardOCP.

    eVGA, XFX and BFG claim low to non-existant issues. My polls show an avg of 48% failure rate. It's on HardOCP... go and check out the forums.

Log in

Don't have an account? Sign up now