SQL Stress Tool Results(test description)

Intel’s pre-production Bensley system came out on top in this test, with a 14% lead over the Opteron 280 system. The 1066MHz front-side bus, no doubt, was required to achieve this result, along with the 2MB of L2 cache. Intel has always been competitive with AMD in this test, but was able to pick up an additional 4% this time around over their usual 10% lead.

SQL Stress Tool

Order Entry Stress Test (test description)

This enterprise test has been of great interest to a lot of people, including Intel. Opteron has constantly dominated this test, but times have changed. Bensley essentially tied with the Opteron 280 in this test, as the difference was about 3% (which is standard deviation). The new Blackford chipset architecture, increased front-side bus and memory bandwidth all played a part in Bensley showing this kind of improvement.  Where Opteron used to show, on average, a 15% gain over Intel, they are now neck and neck.

Vendor Heavy Workload

Test Configuration Power Consumption Results
Comments Locked

67 Comments

View All Comments

  • Viditor - Friday, December 16, 2005 - link

    quote:

    How does a difference of $8140 increase to $19,536 which is an increae of over 130%?


    1. Double the number (probably more, but for the sake of argument make it double) for the difference in air conditioning.
    2. The PSU drawas power at about (average) 75-80% efficiency, so increased power demand increases the loss from PSU inefficiancy

    I can't say that the AT number is right, but I can't say it's wrong either...
  • Furen - Friday, December 16, 2005 - link

    Like I said, cooling normally matches the system's power consumption, so the difference is actually 2x $8,140. To this you apply a 20% increase due to inefficiency and you get $19,536. This is why everyone out there is complaining about power consumption and this is why performance per watt is the wave of the future (this is what we all said circa 2001... when transmeta was big) for data centers. I think Intel will have a slight advantage in this regard when it releases its Sossaman (or whatever he hell that's called) unless AMD can push its Opteron a bit more (a 40W version would suffice, considering that it has many benefits over the somewhat-crippled Sossaman).
  • Viditor - Friday, December 16, 2005 - link

    quote:

    I think Intel will have a slight advantage in this regard when it releases its Sossaman (or whatever he hell that's called) unless AMD can push its Opteron a bit more (a 40W version would suffice, considering that it has many benefits over the somewhat-crippled Sossaman).


    Sossaman being only 32 bit will be a fairly big disadvantage, but it might do well in some blade environments...
    The HE line of Dual Core Opterons have a TDP of 55w, which means that their actual power draw is substantially less. 40w?...I don't know. If they are able to implement the new strained silicon process when they go 65nm, then probably at least that low...
  • Furen - Friday, December 16, 2005 - link

    Yes, that's what I meant by the "...considering it has many benefits over the somewhat-crippled Sossaman"... that and the significantly inferior floating-point performance. I've never worked with an Opteron HE so I can't say how their power consumption is. The problem is not the hardware itself, though, but also the fact that AMD does not PUSH the damn chip. It's hard to find a non-blade system with HEs, so AMD probably needs to drop price a bit on these to get people to adopt them on regular rack servers.
  • Viditor - Friday, December 16, 2005 - link

    quote:

    I've never worked with an Opteron HE so I can't say how their power consumption is

    Me neither...and judging it by the TDP isn't really a good idea either (but it does give a ceiling). Another point we should probably look at is the FBDimms... I've noticed that they get hot enough to require active cooling (at least on the systems I've seen). I know that Opteron is supposedly going to FBDs with the Socket F platforms (though that's uncomfirmed so far). This brings up 2 important questions...
    1. How well do the Dempseys do using standard DIMMS?
    2. How much of the Dempsey test system power draw is for the FBDs?
  • Heinz - Saturday, December 17, 2005 - link

    quote:

    I know that Opteron is supposedly going to FBDs with the Socket F platforms (though that's uncomfirmed so far).


    Go to:

    http://www.amdcompare.com/techoutlook/">http://www.amdcompare.com/techoutlook/

    There, FBDIMM is mentioned in 2007 (Platform overview).
    Thus, either the whole Socket F platform is pushed to 2007, or Socket F simply uses DDR2 or maybe both :)

    But I guess it will be DDR2. Historically AMD uses old, reliable RAM techniques at higher speeds, like PC133 SDRAM, DDR400.. and now it is DDR2-667/800.

    Just wondering, if AMD will introduce then another "Socket G" already by 2007 ?

    byebye

    Heinz
  • Furen - Friday, December 16, 2005 - link

    Dempseys should perform as badly as current Paxvilles if they use normal DDR2. This is because I seriously doubt anyone (basically, Intel) is going to make a quad-channel DDR2 controller since it requires lots and lots of traces and there's better technology out there (FB IS better, whatever everyone says, it's just having its introduction quirks). Remember that Netbursts are insanely bandwidth starved so having quad-channel DDR2 (which is enough to basically saturate the two 1066MHz Front Side Buses) is extremely useful in a two-way system. Once you get to 4-way, however, the bandwidth starvation comes back again.

    Intel is being smart by sending out preview systems with the optimal configuration and I'm somewhat disappointed that reviewers dont point out that this IS the best the chips can get. Normally people dont even mention that the quad-channel DDR2 is what gives these systems its performance benefits but let it be assumed that its the 65nm chips that perform better than the 90nm parts (for some miraculous reason) under the same conditions. That why I'm curious about how these perform on a 667MHz FSB. Having quad-channel DDR2 533 is certainly not useful at all with such a low FSB, I think. Remember how Intel didn't send out Paxvilles out to reviewers? I'd guess that the 667FSB Dempseys will perform even worse than those.
  • IntelUser2000 - Friday, December 16, 2005 - link

    quote:

    Dempseys should perform as badly as current Paxvilles if they use normal DDR2. This is because I seriously doubt anyone (basically, Intel) is going to make a quad-channel DDR2 controller since it requires lots and lots of traces and there's better technology out there (FB IS better, whatever everyone says, it's just having its introduction quirks). Remember that Netbursts are insanely bandwidth starved so having quad-channel DDR2 (which is enough to basically saturate the two 1066MHz Front Side Buses) is extremely useful in a two-way system. Once you get to 4-way, however, the bandwidth starvation comes back again


    What do you mean?? Bensley uses FB-DIMM 4-ch if you didn't know. And people who researches into these stuff/have looked into technical details say, Intel's memory controller design rivals the best, if not better.

    Also, Bensley uses DDR2-533, while Lindenhurst uses DDR2-400. We all know that DDR2-533 is faster than DDR2-400.

    quote:

    That why I'm curious about how these perform on a 667MHz FSB. Having quad-channel DDR2 533 is certainly not useful at all with such a low FSB, I think


    Yes, but that's certainly better than Dual channel DDR2-400 with 800FSB since Bensley will have two FSB's anyway.

    Paxville and Dempsey has same amount of cache, only difference being Dempsey is clocked higher.
  • Furen - Friday, December 16, 2005 - link

    If you read what you quoted again I said that Dempseys should perform the same as current Paxvilles if they use NORMAL DDR2 (as in not FB-DIMMs). I know there are 4 FB channels on Benseley but Viditor said that he wondered how Dempseys would perform on regular DDR2. Yes, Intel's memory controllers are among the best (nVidia's DDR2 mem controller is slightly better, I think) but I said that I don't believe they will make a quad-channel DDR2 northbridge, since the amount of traces coming out of a single chip would be insane. You're correct about Linderhurst sucking.

    Consider that having two FB533 channels. Basically the two CPUs (4 cores) will share the equivalent of a FSB1066 in memory bandwidth, having an insanely wide FSB doesn't help if you dont have any use for it and memory bandwidth limitations always hurt Netbursts significantly. The same could be said for having 4 FB channels and running at dual FSB667. I dont even want to think about Intel's quad-core stuff, though the P6 architecture is much less reliant on memory bandwidth than Netburst.
  • Viditor - Friday, December 16, 2005 - link

    Some good points Furen...it seems to me that with the Dempsey on Benseley, Intel will finally be competitive in the dual dual market. I agree that the quad duals will still be a problem for them...
    I think that in the dual dual sector though, while I doubt Intel will regain any marketshare, they may at least slow down the bleeding.

Log in

Don't have an account? Sign up now