The 7200.9 Series

On the outside, the 7200.9 drives look identical to the 7200.7 and 7200.8 series of desktop drives. On the inside, the 7200.8 line was the first to incorporate the highest density platters to date in their 400GB version drive at 133GB per platter. This puts Seagate ahead of Hitachi who released their 500GB DeskStar quite some time ago. The new 7200.9 line has incorporated a higher density 160GB platter into a few of its drives. The following screenshot shows the manufacturer's specifications for each 7200.9 drive according to capacity size.

Click to enlarge.

The 160GB platter has only gone into the 80GB drive, which uses a single side and single head, and the 160GB drive, which uses both sides of the platter with 2 heads. The 400GB model still uses its original three 133GB platter design that was implemented in the 7200.8, while the new 500GB drive uses four 125GB platters. Why not just use the 160GB platters for the 500GB drive? Doing the math, 3x160GB would bring us to 480GB, which is 20GB short of the 500GB mark, and 4x160GB comes out to 640GB, which cannot be marketed at 500GB without a 140GB waste in total capacity. It makes the most sense to use 4x125GB platters to bring us to a perfect 500GB total capacity. (Note that the drive's total capacity will be slightly lower in Windows, as 1GB is 1,073,741,824 bytes for Windows, but only 1,000,000,000 bytes in hard drive manufacturer specs.)

All of the SATA 2.5 Trimmings

A few months ago, we cleared up some confusion regarding the SATA naming conventions and what they mean. The confusion was with the SATA II name being used in unison with the 3.0Gb/sec transfer rate. SATA II was actually the name of the SATA standards organization, which decides the specifications for each SATA version. (They've since changed names to SATA-IO.) At the time, many thought that the 3.0GB/sec came standard in all drives labeled as SATA II. In fact, transfer rate along with other options such as hot plug, hot swap, and NCQ are options that drive manufacturers can implement in their products if they choose. You can even get most of the "SATA II" features in "SATA I" drives.

Seagate states that it has incorporated all of the features that SATA has to offer in the 7200.9 series including the following:
  • Hot Plug
  • Hot Swap
  • ClickConnect
  • Native Command Queuing (NCQ)
  • Staggered Spin-Up
  • 3G (3.0Gb/sec, backwards compatible with 1.5Gb/sec hardware) maximum transfer rates
The features listed above are only a start to what SATA should bring to the table. The SATA-IO group is continually working on updates to their specifications and we hope to see transfer rates and error checking features mutate into something extremely valuable to desktop and enterprise users alike.

In 2004, 20% of hard disk drives shipped were SATA based - about 41 million, according to Seagate Market Research. It is estimated that this year, the percentage will increase to 80% of shipped drives being SATA based, 40% of which will be Seagate drives. Meanwhile, PATA is being phased out and nearly all production will cease by the end of 2006.

Other Characteristics

Seagate reports that all of the drives in the 7200.9 line will feature an operating shock tolerance of about 63Gs and a non-operating shock of 350Gs, making them extremely rugged. Almost all but Hitachi's 7K500 drive can handle this much non-operating shock, but shock tolerance during normal operation is not as forgiving, with many drives only allowing about 55Gs. Not that we would recommend dropping your drives or computer, but accidents happen...

Click to enlarge.

Seagate is also reporting a lower sound rating between 2.5-2.8 bels while the drives are idle, and about 2.8-3.2 bels while the drives are seeking for data. According to Seagate, the lowest amount of sound audible by human ears is about 2.6 bels, so the idle noise output is borderline inaudible to our ears. Combine this with the hum of case and heat sink fans, and the hard drive is basically silent.

Click to enlarge.

In the next few weeks we will be looking at the performance of the 500GB 16MB SATA model of the 7200.9. We'll put it through our usual synthetic, simulated, and real world tests, and we'll compare it not only to the 400GB 7200.8, but also to some older drives like the 120GB 7200.7 as well as Maxtor's and Hitachi's higher capacity drives.

Index Seagate’s Upcoming Offerings


View All Comments

  • PitBrz - Monday, October 17, 2005 - link

    7200.9 New King !!!
    HDTach average read: 63,6 MB/s
    RAID0 2x160GB TecBench: Average 115 MB/s, Max 143 MB/s, min 68 MB/s">
  • mariush - Wednesday, October 12, 2005 - link

    What's with all the ©Seagate Confidential texts on the images ? Reply
  • blwest - Wednesday, October 12, 2005 - link

    I didn't really find this article useful. No benchmarks. I could have gotten this information from seagate's website.... Reply
  • SnowyEnigma - Tuesday, October 11, 2005 - link

    I just bought 3 400g 7200.8! Reply
  • flatblastard - Tuesday, October 11, 2005 - link

    I'm liking the specs of the 300GB model, can't wait to get my hands on one.
    I've been hoping Seagate would take on the 10k rpm market, but, oh well. Hopefully, this will be the last generation of the 7200.x line. I don't wanna see 7200.10 until I see 10000.x first!
  • techspeed - Tuesday, October 11, 2005 - link

    why the avg seektime 11ms compared to 8.5ms in early models? Reply
  • JarredWalton - Tuesday, October 11, 2005 - link

    On Seagate's site, all of the 7200.8 and .9 drives look like they list 11 ms for the seek time. The 7200.7 all list 8.5 ms. However, this may be a difference in measured times. I believe the 7200.7 do not include rotational latency, which is 4.16 ms at 7200 RPM. I guess we'll have to wait for the benchmarks, but I think the .8 and .9 are supposed to seek faster. Reply
  • Adamv1 - Monday, October 10, 2005 - link

    cut the guys some slack, personaly i just started seeing these show up recently and have been on the search for info on them and at the moment its fairly hard to find any. this will at least give me some new info to chew on while the reviews are in progress. Reply
  • Mumrik - Monday, October 10, 2005 - link

    Nice advert...

    Why the hell did you post it in the "Latest Reviews" section?
  • JarredWalton - Monday, October 10, 2005 - link

    For the same reason we post tradeshows and other articles there. We really only have the short "Insider Stories" and longer "Reviews". "Reviews" can really be previews, major product releases (I think this qualifies), reports from tradeshows or other trips, etc. Buyer's Guides and Price Guides, for example, aren't "reviews" either. Reply

Log in

Don't have an account? Sign up now