Sapphire PURE Innovation - ATI's Chipset for the AMD Enthusiast
by Wesley Fink on July 29, 2005 12:05 AM EST- Posted in
- Motherboards
Basic Features: Sapphire PURE Innovation
| Sapphire PURE Innovation | |
| CPU Interface | Socket 939 Athlon 64 |
| Chipset | ATI RX480 Northbridge - ATI SB450 Southbridge |
| BUS Speeds | 200 to 440MHz in 1MHz Increments |
| Memory Speeds | DDR200, 266, 333, 366, 400 (433, 466, 500, 533 with Rev. E AMD) |
| PCIe Speeds | 100-200 |
| PCI/AGP | Fixed at 33/66 |
| Core Voltage | Auto, 0.8V to 1.55V in 0.025V increments PLUS .0V to 0.6V in 0.02V increments (Maximum vCore 2.15V) |
| CPU Clock Multiplier | 4x-25.5x in 0.5X increments |
| DRAM Voltage | Auto, 2.5V to 4.0V in .05V increments |
| HyperTransport Frequency | 1000MHz (1GHz) |
| HyperTransport Multiplier | Auto, 1X to 5X |
| HyperTransport Voltage | 1.22V, 1.29V, 1.39V, 1.5V |
| Xpress 200 Voltage | 1.22V, 1.29V, 1.39V, 1.5V |
| PCIe 1.2 Voltage | 1.22V, 1.29V, 1.39V, 1.5V |
| PCIe 1.8 Voltage | 1.8V, 1.9V |
| Memory Slots | Four 184-pin DDR DIMM Slots Dual-Channel Configuration Regular Unbuffered Memory to 4GB Total |
| Expansion Slots | 1 PCIe x16 2 PCIe x1 2 PCI Slots |
| Onboard SATA/RAID | 4 SATA Drives by SB450 (RAID 0, 1, JBOD) 2 SATA II Drives by Sil 3132 |
| Onboard IDE/IDE RAID | Two Standard ATA133/100/66 (4 drives) |
| Onboard USB 2.0/IEEE-1394 | 8 USB 2.0 ports supported by SB450 2 1394 Firewire by VIA VT6307 |
| Onboard LAN | Gigabit PCIe Ethernet by Marvel 88E8052 |
| Onboard Audio | Azalia HD Audio by Realtek ALC880 |
| BIOS Revision | Award (7/28/2005) |
The DFI nForce4 Ultra and SLI boards have quickly developed a reputation for offering the enthusiast every imaginable BIOS option. We mention the DFI only to put in perspective that the Sapphire ATI offers 2 more memory adjustments not found on the DFI and even more controls to tweak the performance of the motherboard. It is clear that ATI has worked with some leading enthusiasts in refining the Crossfire AMD - it clearly shows in the depth and breath of available options. At the other end of the spectrum, the Sapphire ATI also offers automatic overclocking options in the BIOS for those uncomfortable with manual overclocking
Facebook
Twitter
RSS
52 Comments
View All Comments
RobFDB - Saturday, July 30, 2005 - link
Guess you missed where i said "(with the exception of MSI)". Learn to read mate before you go posting.RobFDB - Friday, July 29, 2005 - link
ATI and Sapphire should be congratulated for bringing the AC880 to AMD users. We had it good with Soundstorm but since then onboard audio as gone back several steps (with the exception of MSI). Its good that AMD users are being given the option to have quality onboard audio.bob661 - Friday, July 29, 2005 - link
This what impresses me the most about these boards is this codec support. I still won't buy an ATI chipset until the third or fourth version comes out (you guys can test it for me) but impressive features and performance nonetheless.jab98 - Friday, July 29, 2005 - link
*codecerwos - Friday, July 29, 2005 - link
"[AMD] Enthusiast" is written with a capital E in the article, and it should not be, since it's not a proper noun. Please fix this error, because it looks grossly unprofessional to anyone with a reasonable command of the written word.RobFDB - Friday, July 29, 2005 - link
Really though, get over it. It doesnt matter in the slightest if we're being honest here. Anyway back to more important matters.I'm really happy that ATI have managed to bring a top performing board aimed at enthusiasts to market. I was also extremely impressed to see Sapphire implement 4v for the RAM. One issue that i'd like to see investigated is wether the cold boot issue that affects DFI NF4 boards using OCZ VX mem @ high voltages affects the Sapphire board too. Aside from that this is a very impressive showing from ATI. One last thing. I have a x850XT PE and i'm not sure if that can be used as a slave card when ATI bring out the R520. If so that would make a very attractive upgrade.
rjm55 - Friday, July 29, 2005 - link
The X850XT PE works fine as a slave with the X850 Master Card. In demos at Computex, ATI was showing an X850 Master with an X850XT PE slave.Jojo7 - Friday, July 29, 2005 - link
This isn't exactly true. Ati distributed a special driver that SIMULATED crossfire. The actual cards were really just 2 identical x850xtpe's. Though, one probably had an altered bios to simulate a master card.Read it for yourself: http://anandtech.com/weblog/default.aspx?bid=231">http://anandtech.com/weblog/default.aspx?bid=231
dlamblin - Friday, July 29, 2005 - link
Did I miss the mention in the article? Is this an ATX or an mATX board. I'm guessing the former, but it wouldn't be out of place to list the fact along side the rest.erwos - Friday, July 29, 2005 - link
It's ATX. If it has more than four slots, it's too big to fit the mATX standard.