Dual Core Server Performance: AMD's Opteron x75 Series

Our first comparison of AMD's new dual core parts is in the server world - where AMD's new CPUs will be shipping to first.  Of course, no review is complete without a handful of interesting experiences from the lab, and this dual core launch was no exception. 

Server Test Platforms

AMD
Our Dual Core samples arrived a few weeks ago from AMD, well in advance of the launch date of April 21st. At the time of the samples' arrival, we didn't have a stable server board to use for our tests. The Tyan S2891 board that we had on hand was still going through BIOS changes and was not recommended for use with the Dual Core parts. As per AMD's recommendation, we secured a Tyan S2895 Workstation board, which AMD had verified was stable. We were uneasy running server based benchmarks on a workstation board and felt that a server based board recommended by AMD would have been more appropriate. That being said, both the S2891 and S2895 are very similar and are both nForce 4 based chipsets, so performance is virtually identical.


Intel
Intel is expected to release their Dual Core Xeon parts in the first quarter of 2006. So, we requested from Intel their latest Xeon MP system, since we were essentially putting a "4P" system against a Dual Xeon with the current hardware that we have in the lab. Intel, as always, came through with their SR4850HW4 4P system along with 4 Cranford 3.6 GHz 1MB L2 cache processors and 4 Potomac 3.3 GHz 8MB L3 Cache processors.

The SR4850HW4 system uses Intel's new E8500 server chipset "Twin Castle", which most importantly includes a new dual bus architecture that runs at 667MHz, up from 400MHz on older Xeon platforms. As you may have read in our last Quad Xeon article, the Xeon was in dire need of some front side bus bandwidth. Aside from the new bus architecture, the E8500 uses DDR2 based memory, in line with the current DP based Xeon systems.

Intel Front Intel memory Intel Cpu

When we began our testing on the new Intel platform, we quickly learned another "feature" of the SR4850HW4. After unpacking the system and setting it up, we proceeded to power it up with the default configuration with which the system had been shipped. The system wouldn't power up. With barely 2-3 days until the launch of this article, we were (needless to say) "on edge" about getting the benchmarks running. We placed an E-mail into our Intel contact, and within about 5 minutes, an engineer gave us a call. After a few minutes on the phone, the engineer asked, "What do you have the system plugged in to?" We responded, "Well, a wall plug in our lab." He then broke the news: "That system requires 208V to run." Now what? Off to Home Depot we went and grabbed some 12 gauge wire and breaker, and within an hour, we were installing Windows. Another Lab adventure for the books?

Breaker Panel Plug

Server Test Hardware Configuration

AMD
Motherboard: Tyan S2895
Memory: 4GB Kingston PC3200 ECC (2GB for Web benchmarks)
OS: Windows 2003 Enterprise/Windows 2003 Web edition (Web benchmarks)
RAID: LSI Logic 320-2 with 8 Seagate 15K Cheetahs in Raid 0

Intel
Memory: 4GB Infineon DDR2
OS: Windows 2003 Enterprise/Windows 2003 Web edition (Web benchmarks)
RAID: LSI Logic 320-2 with 8 Seagate 15K Cheetahs in Raid 0

The Lineup - Athlon 64 X2 Web Tests - FuseTalk .NET
Comments Locked

144 Comments

View All Comments

  • MDme - Friday, April 22, 2005 - link

    #92

    the difference between an opteron and an a64/fx is as follows:

    opteron - needs ECC memory cache is 1mb it is multiplier locked, COHERENT HT LINKS

    a64 - uses non-registered (non-ecc) memory (which is faster), cache 512k-1mb, multiplier locked

    a64fx - non-ecc memory, 1mb cache, unlocked.

    so opteron's are not a64/fx's but are quite similar. the main difference is the memory type and the COHERENT HT links

    therefore the X2 4400+ is really an opteron (dual core) running at 2.2 with dual 1mb cache but with the COHERENT HT link disabled that uses non-ECC ram.

    performance should therefore be almost identical between one DC opteron 2.2ghz and one A64 X2 4400+ (possibly the X2 will be faster 5%) due to the non-ECC memory which is faster.


  • tygrus - Friday, April 22, 2005 - link

    If you use a Opteron 875 then label it as such in all diagrams. You can make a note that the Athlon64 X2 4400+ will perform similarly to the Opteron 875. The differences in MB and RAM will affect results and so a direct re-labelling should not be made.
    Good database, multimedia, data analysis should make good use of multi-core/multi-CPU systems. When I mention data analysis I'm talking about software like SAS 9.1.3 and SAP. Even SAS is only threaded for a few tasks and is a big hassel to pipeline one step into another.
  • Some1ne - Thursday, April 21, 2005 - link

    Good article overall, although I question the validity of declaring that an Opteron 875 is roughly equivalent to an Athlon 64 4400+. I could be wrong, but surely there must be significant architectural differences between the server-class chip (top of the line server-class chip no less) and the desktop Athlon 64? If not then why the price premium for Opterons, and why don't manufacturers just find a way to kludge the Athlon64 to work in MP configurations as in theory if they are really equivalent when run at the same clock speed, it would be much more cost effective to use kludged Athlon 64's, and it would also let higher performance levels to be reached as the dual-core Athlon64's are slated to run at one clock increment higher than the fastest dual-core Opteron's? So anyways, is it *really* valid to treat an Opteron as being essentially equivalent to a similarly clocked Athlon64? As much as I love finally seeing Intel chips trounced pretty much across the board, it seems to me like the results could potentially be inaccurate given that an Opteron 875 was used and simply "labeled" as an Athlon64 4400+.
  • Cygni - Thursday, April 21, 2005 - link

    #89... seeing as how the Opty x75 and A64 X2 are based on functionally identical cores, thats not too likely at all. What DOES seem likely to me reading this article is that BIOS updates, and X2 support on 939 boards, is going to be a very interesting story to follow. It doesnt look like its too easy to get a solid AMD Dual Core BIOS if even Tyan is struggling, of all board mfts. May give a fiesty smaller board mft a chance to slam the bigboys and grab marketshare (such as ECS with the K7S5A).
  • Jason Clark - Thursday, April 21, 2005 - link

    saratoga, waah? There are similarities between C# and C++. While agree it's java'ish as well, it definitely has similarties to c++. One could say c# shaes similarities with c/c/c++.

    read away:

    http://www.mastercsharp.com/article.aspx?ArticleID...

    http://www.csharphelp.com/archives/archive138.html

    "C# is directly related to C and C++. This is not just an idea, this is real. As you recall C is a root for C++ and C++ is a superset of C. C and C++ shares several syntax, library and functionality." Quoted from above.

    L8r.




  • Jep4444 - Thursday, April 21, 2005 - link

    I've spoken to a few people from XS who have Engineering Samples of the Athlon X2s and all im hearing is that arent nearly as good as the dual core Opterons, they were apparently rushed
  • xtknight - Thursday, April 21, 2005 - link

    #86 - the r_smp cvar was disabled in quake3 in a patch, for a reason i don't know. i confirmed this by having quake3 crash on my p4 HT CPU with that setting enabled. as for doom3, i'm not sure. i'm guessing it's not implemented well enough yet...
  • Chuckles - Thursday, April 21, 2005 - link

    #83:
    "Real gamers" may use a single core, but I have been hankering for duallies since I tried an older dual G4 to my newer single G4. Even on the crappy MaxBus, I could browse the web, chat, do "real work" and game, without having everything go to pot when a bolus of e-mail came in.
    When you buy a dualie of any type, you buy the ability to do other stuff while you computer working on its latest task. Remember that when you get lagged while Outlook downloads your latest spam.

  • Googer - Thursday, April 21, 2005 - link

    Why wern't there any SMP Tests done on Quake 3 engine, after all it is said to be multithreaded.

    Also, Carmack said during the devlopment of DOOM3 that the engine was going to support multiple processors, did this ever happen? Does anyone know what the command might be for D3 console to enable SMP, like it's cousin? How much truth is there to this?
  • Nighteye2 - Thursday, April 21, 2005 - link

    Add to all the arguments that we can potentially see programs taking advantage of this quite soon...without the effort required to implement full multi-threading, game functions could be assigned to use the other processor if it's available. For example, AI can be done by one core, while the other core does the rest of running the game.

Log in

Don't have an account? Sign up now