MSI MAG B560 Tomahawk Wi-Fi

One of MSI's most interesting series over the last few years has been the Tomahawk. Representing its more modest gaming-focused MAG (arsenal gaming) series, it's been proven to good effect with a mixture of decent features, usually at a very competitive price point. The MSI MAG B560 Tomahawk Wi-Fi looks to further solidify this for Intel's more budget-focused LGA1200 B560 series. It includes a black PCB, with gunmetal grey heatsinks, including militaristic themed lettering we've come to expect from a Tomahawk; its namesake is a popular missile in the US military's arsenal.

Looking towards the B560 Tomahawk Wi-Fi's feature set, it includes two full-length PCIe slots, with the top slot operating at PCIe 4.0 x16 and the second slot electronically locked to PCIe 3.0 x4. MSI also includes one PCIe 3.0 x1 slot. For storage, there's a trifecta of M.2 slots, with one supporting PCIe 4.0 x4 drives, and two with support for PCIe 3.0 x4 and SATA. There are six SATA ports, two with straight-angled and four with right-angled connectors, all including support for RAID 0, 1, 5, and 10 arrays. In the top right-hand corner are four memory slots which include support for up to DDR4-5000 and a combined capacity of up to 128 GB.

On the rear panel is a single USB 3.2 G2x2 Type-C, four USB 3.2 G1 Type-A, and four USB 2.0 ports. MSI is using an unspecified Realtek HD audio codec that powers five 3.5 mm and S/PDIF optical output, while its networking capabilities come from an Intel AX210 Wi-Fi 6E CNVi, and a Realtek RTL8125B 2.5 GbE controller. Finishing off the rear panel are a pair of video outputs including one HDMI 2.0 and DisplayPort 1.4 output.

MSI MPG B560I Gaming Edge Wi-Fi MSI MAG B560 Torpedo
Comments Locked

59 Comments

View All Comments

  • FriendlySeaCow - Monday, March 29, 2021 - link

    The MSI MPG B560I Gaming Edge Wi-Fi has been announced and its features fully released, so you can update that page. Incidentally, there's also a typo in the MSI table, where you have "ATX" instead of "ITX" under the Size Column for the B560I.

    Looks like a really nice board: https://www.msi.com/Motherboard/MPG-B560I-GAMING-E...
  • Jorgp2 - Monday, March 29, 2021 - link

    Why didn't they enable the full 8 sata ports for this chipset, X299 is dead anyway.
  • Linustechtips12#6900xt - Thursday, April 8, 2021 - link

    because who uses 8 freaking sata ports at a time, i think the MAX I've ever used is 4
  • Mr Perfect - Monday, March 29, 2021 - link

    Nice round up. Any chance you'll do something similar for H570? They don't seem to cost much more, but have some additional chipset features.
  • Scour - Monday, March 29, 2021 - link

    B560 also with 6x SATA, PCIe 4.0 and also on ATX-boards, sound good for me.
  • sheltem - Monday, March 29, 2021 - link

    According to this Reddit post, the Asrock B560 ITX has pretty good VRM's:
    https://www.reddit.com/r/intel/comments/lao3ym/z59...
  • BrokenCrayons - Monday, March 29, 2021 - link

    Finally some decently priced motherboards are getting attention they deserve! I'm really happy to see and read about hardware in a price segment I would actually buy and use.
  • evilpaul666 - Monday, March 29, 2021 - link

    The 10/11 series would be so much more interesting if it had ECC support.
  • jrbales@outlook.com - Monday, March 29, 2021 - link

    I'm in the process of building a new system for my sister. Bought the ASUS Prime B560M-A at a price competitive with the B460 boards. A very nice mATX board that was nice to work with. One observation and one question. I bought the optional Intel WIFI card & antenna kit to use with the WIFI bracket. On the plus side, it works great and I didn't have to run ethernet cable across the room I was building it in. The negative is that the WIFI bracket has to be attached to the motherboard, using really tiny screws from the rear of the board. That probably took the longest thing in the build as I'd have to try to balance the MB, keep the bracket in place over the holes and the card inserted in the slot, while keeping the tiny screws on the screwdriver long enough to screw in. Now for the question. It involves the first M.2 slot, above the GPU. It's PCIE 4.0. According to everything printed by ASUS, if you use a 10th generation CPU, the slot is disabled, leaving only the second M.2 beneath the GPU. I understand the part about needing an 11th gen CPU to get PCIE 4, but shouldn't the first slot support a PCIE 3.0 M.2 SSD? I'm used to these slots being backward compatible and on my AMD X570 board, you can use either PCIE 3 or 4 SSDs in both slots. Does anyone knows if the B56s0 slot 1 is backward compatible?
  • mobilefrenzy - Tuesday, March 30, 2021 - link

    M.2 Slot 1 on B560 and Z590 mobos don't work with 10th gen CPUs, as they don't have the additional PCIe lanes to enable them.

Log in

Don't have an account? Sign up now