The Samsung SSD 980 (500GB & 1TB) Review: Samsung's Entry NVMe
by Billy Tallis on March 9, 2021 10:00 AM ESTMixed IO Performance
For details on our mixed IO tests, please see the overview of our 2021 Consumer SSD Benchmark Suite.
 |
|||||||||
| Mixed Random IO | Throughput | Power | Efficiency | ||||||
| Mixed Sequential IO | Throughput | Power | Efficiency | ||||||
The mixed random IO test does a great job of separating the low-end drives from the more mainstream models with TLC and DRAM. None of the DRAMless or QLC-based drives come close to the mainstream TLC NVMe drives, and only the Corsair MP400 QLC drive comes close to overall performance of the Samsung 870 EVO SATA SSD. Among the low-end drives, the Samsung SSD 980 is clearly slower than the WD Blue SN550, and less power efficient. Samsung's NVMe drives are all among the most power-hungry during this test, and the SSD 980 doesn't deliver anywhere near as much performance with that power as its high-end siblings.
On the mixed sequential IO test the SSD 980 is more competitive with most of the other low-end NVMe SSDs, and performs much closer to the mainstream NVMe drives. The NVMe Host Memory Buffer feature also seems to help a bit on this test, while it had little impact on the mixed random IO test. With its more competitive performance on this test, the SSD 980's efficiency scores are up to par.
 |
|||||||||
| Mixed Random IO | |||||||||
| Mixed Sequential IO | |||||||||
The performance trend for the Samsung SSD 980 across the mixed random IO test is fairly flat: it can't start out with high random read performance since this test is using 80% of the drive's space—far more than the HMB can help with.
On the mixed sequential IO test, the 980 shows increasing performance as the workload gets more write-oriented, though it and the WD Blue SN550 more or less plateau once reads are less than a third of the workload. The increasing trend illustrates how caching bursts of writes is easier on the drives than handling four separate threads each reading at QD1—but the low-end drives still have clear limits to the write volume they can handle.
Power Management Features
Real-world client storage workloads leave SSDs idle most of the time, so the active power measurements presented earlier in this review only account for a small part of what determines a drive's suitability for battery-powered use. Especially under light use, the power efficiency of a SSD is determined mostly be how well it can save power when idle.
For many NVMe SSDs, the closely related matter of thermal management can also be important. M.2 SSDs can concentrate a lot of power in a very small space. They may also be used in locations with high ambient temperatures and poor cooling, such as tucked under a GPU on a desktop motherboard, or in a poorly-ventilated notebook.
| Samsung SSD 980 NVMe Power and Thermal Management Features |
|||
| Controller | Samsung Pablo | ||
| Firmware | 1B4QFXO7 | ||
| NVMe Version |
Feature | Status | |
| 1.0 | Number of operational (active) power states | 3 | |
| 1.1 | Number of non-operational (idle) power states | 2 | |
| Autonomous Power State Transition (APST) | Supported | ||
| 1.2 | Warning Temperature | 82 °C | |
| Critical Temperature | 85 °C | ||
| 1.3 | Host Controlled Thermal Management | Supported | |
| Non-Operational Power State Permissive Mode | Not Supported | ||
The Samsung SSD 980 supports most of the usual NVMe power management features and claims very fast power state transition latencies, especially for its intermediate idle state that's supposed to get it down to about 50mW.
| Samsung SSD 980 NVMe Power States |
|||||
| Controller | Samsung Pablo | ||||
| Firmware | 1B4QFXO7 | ||||
| Power State |
Maximum Power |
Active/Idle | Entry Latency |
Exit Latency |
|
| PS 0 | 5.24 W | Active | - | - | |
| PS 1 | 4.49 W | Active | - | - | |
| PS 2 | 2.19 W | Active | - | 0.5 ms | |
| PS 3 | 50 mW | Idle | 0.21 ms | 1.2 ms | |
| PS 4 | 5 mW | Idle | 1 ms | 9 ms | |
Note that the above tables reflect only the information provided by the drive to the OS. The power and latency numbers are often very conservative estimates, but they are what the OS uses to determine which idle states to use and how long to wait before dropping to a deeper idle state.
Idle Power Measurement
SATA SSDs are tested with SATA link power management disabled to measure their active idle power draw, and with it enabled for the deeper idle power consumption score and the idle wake-up latency test. Our testbed, like any ordinary desktop system, cannot trigger the deepest DevSleep idle state.
Idle power management for NVMe SSDs is far more complicated than for SATA SSDs. NVMe SSDs can support several different idle power states, and through the Autonomous Power State Transition (APST) feature the operating system can set a drive's policy for when to drop down to a lower power state. There is typically a tradeoff in that lower-power states take longer to enter and wake up from, so the choice about what power states to use may differ for desktop and notebooks, and depending on which NVMe driver is in use. Additionally, there are multiple degrees of PCIe link power savings possible through Active State Power Management (APSM).
We report three idle power measurements. Active idle is representative of a typical desktop, where none of the advanced PCIe link or NVMe power saving features are enabled and the drive is immediately ready to process new commands. Our Desktop Idle number represents what can usually be expected from a desktop system that is configured to enable SATA link power management, PCIe ASPM and NVMe APST, but where the lowest PCIe L1.2 link power states are not available. The Laptop Idle number represents the maximum power savings possible with all the NVMe and PCIe power management features in use—usually the default for a battery-powered system but rarely achievable on a desktop even after changing BIOS and OS settings. Since we don't have a way to enable SATA DevSleep on any of our testbeds, SATA drives are omitted from the Laptop Idle charts.
The active idle power draw of the Samsung SSD 980 is definitely lower than on Samsung's high-end NVMe drives, but given that this is a DRAMless 4-channel controller it seems like they could have done a bit better. On the other hand, the WD Blue SN550 doesn't even drop below 1W without being put into a sleep state. Both the desktop and laptop idle power draw scores look good for SSD 980. The measured wake-up latencies are a bit faster than the claimed 9ms, and in line with other Samsung NVMe drives.
Facebook
Twitter
RSS
54 Comments
View All Comments
ptthere - Thursday, June 17, 2021 - link
I think what was implied by "retail-ready," was the idea that OEM builders like Dell, Acer, etc. might use the price-competitiveness of this model with the Samsung name-recognition to package, say, the 500 GB model into their builds. This would go a long way for performance and marketing bragging for sales when compared to lesser performing drives like an other (insert lesser-known name here) 250 GB DRAM-less NVMe.Byte - Monday, August 30, 2021 - link
Samsung has a lot of OEM only drives that most of us has not seen directly. As they have reviewed a few OEM only Samsung SSDs, i think this is why it was written that way.cyrusfox - Tuesday, March 9, 2021 - link
Doesn't look like to me they are targeting the OEM crowd, lazy design as it is a two-sided M.2 stick, by removing the dram should have been easy to get everything on one side.This is solely for the retail market where consumers by and large prefer Samsung , most will pick the cheapest samsung drive and at this price it will be hard to justify a brand that isn't associated with performance.
The whole thing appears to be designed for cost, and I am guessing a two-sided design was the most cost efficient layout(Don't have to double stack NAND dies?). Did you take any picture of the device with the sticker removed, would be interested to see how they chose to populate this. Also impressive the QD1 uplift with HMB enabled.
Wereweeb - Tuesday, March 9, 2021 - link
It's a single-sided drive. The image shows the PCB with and without the label, not the different sides.cyrusfox - Tuesday, March 9, 2021 - link
Dang you are right, my bad, Guess we may see this in OEM laptops then.If only anandtech comments allowed edits, my ignorance will live on forever...
Kurosaki - Tuesday, March 9, 2021 - link
Entry level sizes for over the top prices. Yayy.Oxford Guy - Tuesday, March 9, 2021 - link
Samsung likes to have a catch for trying to spend less, like the dryer I bought. It played an extremely long very irritating song every time the load was finished. Only on the more expensive models could it be turned off. Of course none of the online reviews warned people about this and there was nothing in the big box store about it. Caveat emptor!What did turn up online later, though, were the endless tales of woe from owners whose machines broke an expensive part — the same thing that happened with mine. The dryer only lasted three years or so. Some part on it melts and it's too difficult to replace and too expensive to have serviced.
Last Samsung appliance for me.
UltraTech79 - Monday, March 29, 2021 - link
Dude just unplug the internal cable that connects the internal speaker. No warranties have to be lost hereWereweeb - Tuesday, March 9, 2021 - link
Samsung tried really hard to make an SSD drive with worse value for money than Intel, and I'd argue they still managed to fail.I guess it's fast enough that the typical consumer wouldn't notice the difference, will last longer than Intel's QLC, and the user would still get a fuzzy feeling inside because they bought a Genuine Samsung 980®™
powerarmour - Tuesday, March 9, 2021 - link
A castrated TLC drive is still better than those Intel QLC horror shows.