Section by Andrei Frumusanu

CPU MT Performance: SPEC 2017

Whilst single-threaded performance of Zen3 seems to be an absolute win for the new Ryzen 5000 series CPUs, multi-threaded performance is also the other important aspect of a design. Generally, what comes into play much more for multi-threaded performance is the power efficiency of the design. As none of the current x86 consumer or enterprise parts are able to actually run all their cores at maximum frequency for peak performance due to platform power limitations, any resulting performance boost we might see between generations with a similar power cap will be due to power and energy efficiency gains between the designs.

For AMD, we’re limiting the detailed comparisons here to the 3950X and the 5950X which both have a PPT of 142W, which means that’s the maximum peak power for the platform, and observed 120-125W sustained figures in actual workloads. We’re also throwing in a 10900K for context, but given the very different core count numbers it doesn’t serve an exact apples-to-apples comparison.

SPECint2017 Rate-N Estimated Scores

Starting off with SPECint2006, the performance uplifts for the new Ryzen 5000 series here doesn’t seem to be all that significant in most tests, with uplifts well below those of the single-thread benchmarks.

Most of the tests are showing a 10% performance uplift, with the more memory heavy test showing no improvement. Some of the minor uplifts such as a 5% boost in 502.gcc seem quite disappointing and showcase that the new platform isn’t all that big of a boost for productivity workloads.

SPECfp2017 Rate-N Estimated Scores

In SPECfp2017, 510.parest and 527.cam4 stand out as the two workloads with the biggest improvements, with the rest of the workloads all either having sub-5% improvements, or even just flat or slower performance than the 3950X.

SPEC2017 Rate-N Estimated Total

** Preliminary figures to be re-tested due to 2x16GB SR vs 4x8GB SR memory DIMM configuration, scores will improve.

Overall, the new Ryzen 5000 series are showcasing a quite conservative 8-9% performance improvement over their predecessor generation SKUs. The 12-core variant here is showing a little bigger boost of 10-13%.

In this regard, the new chips seem to have missed the mark in terms of AMD’s claims for 12% better performance per watt for the new 5950X, and 26% better performance per watt for the 5900X – their marketing should have done better in explaining those figures, or just be more conservative with their numbers. This also doesn’t bode too well for the eventual EPYC-based Zen3 Milan chips.

SPEC2006 and SPEC2017 Single-Threaded Results Test Setup and #CPUOverload Benchmarks
Comments Locked

339 Comments

View All Comments

  • Qasar - Tuesday, November 17, 2020 - link

    no, but fake posts are.
  • feka1ity - Tuesday, November 17, 2020 - link

    sure, everything faster than new amede is fake for fanboiz
  • Iketh - Monday, November 16, 2020 - link

    was there a performance/watt metric anywhere in this article? how many memory controllers on each chip?
  • peevee - Tuesday, November 17, 2020 - link

    As MT vs ST tests clearly show, there is not enough power and/or memory bandwidth on AM4 for 16 cores anymore.

    Hoping for a 4-channel DDR5 mass-market platform next.

    One 8-core chiplet, one graphics chiplet (similar to 5600 XT, and working together with an additional AMD graphics card), 4 channels of DDR5 to support that, preferably as SODIMM slots right on the CPU package for smallest latency and power consumption possible (and making a cheap MB possible)... I can dream, can I? It should have been this generation, I would have ordered it already.
  • RobJoy - Thursday, November 19, 2020 - link

    Same or better performance than Intel for the same price, with PCIe 4.0 for uber fast drives?
    Where do I sign?
    Bring it on.
  • ssshenoy - Tuesday, December 15, 2020 - link

    How do you conclude that this product line is superior to Tiger Lake when there are no measurements that compare these two? All the Intel to AMD comparisons are the old Skylake core on 14 nm vs. the latest Zen 3 core on 7 nm. Am I missing something here?
  • JSyrup - Wednesday, January 20, 2021 - link

    Is there a reason why the 5800X outperforms both the 5900X and 5950X in some games? Could it have something to do with 1 CCX vs 2 CCXs?
  • JSyrup - Wednesday, April 7, 2021 - link

    *CCDs

    I got it now. For the best of both worlds, go for the 5950X. Then, if you play games, disable 1 CCD in BIOS or leave both CCDs enabled if you do productivity. This is how to maximise performance and prevent unexpected performance drops.
  • Sgtkeebler - Tuesday, May 11, 2021 - link

    On RDR why do higher resolutions get higher FPS than 1080p?

Log in

Don't have an account? Sign up now