ASRock B550M Pro4

Even though there is a mATX version of the Pro4, the two boards are not variants of each other. The B550M Pro4 has a different layout of where the boards are by comparison, as well as a different arrangement on the rear panel.

There is still the 75% rear panel cover over the top of the controllers from the back panel, also covering the power delivery (6-phase) this time, and the chipset heatsink / M.2 heatsinks are not connected either. The CPU takes power from a single 8-pin, and the socket has access to three 4-pin fan headers within reasonable distance.

To the right of the socket are four memory slots, all using single side latches as to not interfere when large bulky graphics cards are used.  On the right hand side of the board, at the top we have an RGB header, then a 24-pin ATX connector, then a USB 3.0 header, two vertical SATA ports, four regular SATA ports, and then a chipset based PCIe 3.0 x2 M.2 slot.

For the PCIe area, the top slot is a PCIe 4.0 x16 slot with additional reinforcement, and that sits just above the PCIe 4.0 x4 M.2 slot for storage, which has its own heatsink (but isn’t connected to the chipset heatsink). The board also has a PCIe 3.0 x4 full-length slot at the bottom, between which is a M.2 Wi-Fi connector for anyone to add in their own Wi-Fi card.

Along the bottom of the motherboard is the video output header, two RGB LED headers, a COM port header, three more 4-pin fan headers, two USB 2.0 headers, another USB 3.0 header, and the front panel outputs. On the far left is the audio solution, which uses an ALC1200 with PCB separation and some filter caps.

On the rear panel from left to right is a spot for Wi-Fi antenna, an analog D-Sub video output, a HDMI port, a DisplayPort, two USB 2.0 ports, a combination P/2 port, a Type-A USB 3.2 Gen 2 port, a Type-C USB 3.2 Gen 2 port, four USB 3.2 Gen 1 ports, a Realtek RTL8111H gigabit Ethernet port, and the audio jacks.

 

ASRock B550 Pro4 ASRock B550M-HDV
Comments Locked

101 Comments

View All Comments

  • Savikid - Tuesday, August 25, 2020 - link

    But the new oculus stuff only uses 1 usb port, so that right there is a drop. I use 2 for keyboard and mouse, one for a wireless controller, and one for my HMD.
  • Gigaplex - Tuesday, June 16, 2020 - link

    "On that one I added a USB PCI card to get enough ports."

    That's not really helpful to the user who said they can't add in a card on their mITX system.
  • eye4bear - Wednesday, July 1, 2020 - link

    Must be nice to have no external hard-drives, I have 3 all needing their own USB 3 port, along with a Logitech dongle that runs both my mouse and keyboard, finally a Bluethooth dongle as my computer has none built-in. Yes I would need 6 USB ports (one open for USB sticks) just to keep even.
  • consolessuck - Friday, November 6, 2020 - link

    No, I have 3 usb ports on my laptop and i only use 1 for my mouse. As it turns out, the most amount of usb ports i use at once is two when i am making a wired data transfer with my mouse plugged in. Actually, I almost never transfer data to my phone with a wire, instead just sharing them via bluetooth. and considering i never make large data transfers to my phone, this works out just fine. as for a desktop, however, i'd like a minimum of 3 as i'll always have not only a mouse, but a keyboard plugged in all the time.
  • taz-nz - Thursday, June 18, 2020 - link

    The Asrock B550M Steel Legend has 8 port on the back:
    4x USB-A 3.1 ports
    1x USB-A 3.2 port
    1x USB-C 3.2 port
    2x USB-A 2.0 ports

    And you still have two USB 2.0 internal header, plus two USB 3.1 internal headers.
    So that allows you to have another
    4x USB-A 3.1
    4x USB-A 2.0 ports.

    so that's 16 Ports
    Now if you like me and need Internal USB 3.2 USB-C header, you can use the PCIe 3.0 x2 m.2 slot to add one of these:
    https://www.delock.de/produkte/S_63998/merkmale.ht...

    or if you want two more USB 3.1 internal header you could add one of these:
    https://www.delock.de/produkte/G_62843/merkmale.ht...

    So if you can live without a second m.2 slot you have four more USB-A 3.0 ports.
    That gives you 20 USB ports without giving up a PCIe slot.
  • taz-nz - Thursday, June 18, 2020 - link

    oops, just noticed you said mITX not mATX
  • desii - Tuesday, June 16, 2020 - link

    Do any of these motherboards support ECC RAM (either buffered or unbuffered)?
  • drSeehas - Wednesday, June 17, 2020 - link

    Socket AM4 CPUs support only unbuffered RAM.
  • PixyMisa - Wednesday, June 17, 2020 - link

    I did a quick look on ASRock's site, since they're pretty good on ECC support, and every B550 board I checked lists ECC as supported.
  • Samus - Tuesday, June 16, 2020 - link

    I think AMD screwed up here with pricing their platforms appropriately. I understand the push for PCIe 4 but they can't have average motherboard prices hovering between $200-$300. There has to be $100 motherboards to be taken seriously especially by OEM's if they want 4000 parts to become mainstream.

    But maybe they don't...maybe they plan to milk the 3000 parts for a few years. After all, there isn't much reason not too. They have no competition from Intel in the budget segment right now.

Log in

Don't have an account? Sign up now