The Hardware

First up on the chopping block is the Gigabyte 3D1. Gigabyte is touting this board as being a 256bit 256MB card, but this is only really half the story. Each of the 6600GT GPUs is only privy to half of the bandwidth and RAM on the card. The 3D1 is obviously a 256MB card, since it physically has 256MB of RAM on board. But, due to the nature of SLI, two seperate 128bit/128MB busses do not translate to the same power as a 256bit/256MB setup does on a single GPU card. The reason for this is that a lot of duplicate data needs to be stored in local memory off of each GPU. Also, when AA/AF are applied to the scene, we see cases where both GPUs end up becoming memory bandwidth limited. Honestly, it would be much more efficient (and costly) to design a shared memory system into which both GPUs could draw if NVIDIA knew someone was going to drop the chips on one PCB. Current NVIDIA SLI technology really is designed to connect graphics cards together at the board level rather than at the chip level, and that inherently makes the 3D1 design a bit of a kludge.



Of course, without the innovators, we would never see great products. Hopefully, Gigabyte will inspire NVIDIA to take single-board multi-chip designs into account when building future multi-GPU options into silicon. Even if we do see a "good" shared memory design at some point, the complexity added would be orders of magnitude beyond what this generation of SLI offers. We would certainly not expect to see anything more than a simple massage of the current feature set in NV5x.

The 3D1 does ship with a default RAM overclock of 60MHz (120MHz effective), which will end up boosting memory intensive performance a bit. Technically, since this card just places two 6600GT cards physically on a single board and permanently links their SLI interfaces, there should be no other performance advantages over other 6600GT SLI configurations.

One thing that the 3D1 loses over other SLI solutions is the ability to turn off SLI and run two cards with more than two monitors on the output. Personally, I really enjoy running three desktops and working on the center one. It just exudes a sense of productivity that far exceeds single and dual monitor configurations.

The only motherboard that can run the 3D1 is the GA-K8NXP-SLI. These products will be shipping together as a bundle within the month, and will cost about as much as buying a motherboard and two 6600GT cards. As usual, Gigabyte has managed to pack just about everything but the kitchen sink into this board. The two physical x16 PCIe connectors are wired up with x16 and x8 electrical connections. It's an overclocker-friendly setup (though, overclocking is beyond the scope of this article), and easy to set up and get running. We will have a full review of the board coming along soon.



As it pertains to the 3D1, when connected to the GA-K8NXP-SLI, the x16 PCIe slot is broken into 2 x8 connections that are dedicated to each GPU. This requires the motherboards SLI card be flipped to single setting rather than SLI.

Under the Intel solution, Gigabyte is hoping that NVIDIA will decide to release full-featured multi-GPU drivers that don't require SLI motherboard support. Their GA-8AENXP Dual Graphic is a very well done 925XE board that parallels their AMD solution. On this board, Gigabyte went with x16 and x4 PCI Express graphics connections. SLI performance is, unfortunately, not where we would expect it to be. It's hard to tell exactly from where these limitations are coming, given the state of drivers for Intel lagging the AMD platform. One interesting thing to note is that whenever we had more than one graphics card plugged into the board, the card in the x4 PCIe (the bottom PCI Express slot on the motherboard) took the master role. There was no BIOS option to select which PCI Express slot to boot first as there was in the AMD board. Hopefully, this will be updated in a BIOS revision. We don't think that this explains the SLI performance (as we've seen other Intel boards perform at less than optimal levels), but having the SLI master in a x4 PCIe slot probably isn't going to help.

The revision on the GA-8AENXP Dual Graphic that we have is 0.1, so there is definitely some room for improvement.

But let's take a look at the numbers and see what the tests have to say.

Index The Test
POST A COMMENT

43 Comments

View All Comments

  • sprockkets - Friday, January 7, 2005 - link

    Thanks for the clarification. But also some were using the Server Intel chipset cause it had 2 16x slots, instead of the desktop chipset to use SLI. Like the article said though, the latest drivers only like the nvidia sli chipet. Reply
  • ChineseDemocracyGNR - Friday, January 7, 2005 - link

    #29,

    The 6800GT PCI-E is probably going to use a different chip (native PCI-E) than the broken AGP version.

    One big problem with nVidia's SLI that I don't see enough people talking about is this:
    http://www.pcper.com/article.php?aid=99&type=e...
    Reply
  • Jeff7181 - Friday, January 7, 2005 - link

    Why is everyone thinking dual core CPU's and dual GPU video cards is so far fetched? Give it 6-12 months and you'll see it. Reply
  • RocketChild - Friday, January 7, 2005 - link

    I seem to recall ATi was frantically working on a solution like this to bypass Nvidia's SLI solution and I am not reading anything about their progress. From the position the article points to BIOS hurdles, does it look like we are going to have to wait for ATi to release their first chipset to support a multi-GPU ATi card? Anyone here have any information or speculations? Reply
  • LoneWolf15 - Friday, January 7, 2005 - link

    25, the reason you'd want to buy two 6600GT's instead of one 6800GT is that PureVideo functions work completely on the 6600GT, whereas they are partially broken on the 6800GT. If this solution didn't work in only Gigabyte boards, I'd certainly consider it myself. Reply
  • skiboysteve - Friday, January 7, 2005 - link

    Im confused as to why anyone would buy this card at all. Your paying the same price as a 6800GT and getting the same performance with all the issues that go with Gigabyte SLI. thats retarded. Reply
  • ceefka - Friday, January 7, 2005 - link

    Are there any cards available for the remaining PCI-E slots? Reply
  • Ivo - Friday, January 7, 2005 - link

    Obviously, the future belongs to the matrix CPU/GPU (IGP?) solutions with optimized performance/power consumption ratios. But there is still a relatively long way (2 years?) to go. The recent NVIDIA's NF4-SLI game is more marketing, then technical in nature. They are simply checking the market, concurrence, and … enthusiastic IT society :-) The response is moderate, as the challenge is. But the excitements are predetermined.
    Happy New Year 2005!
    Reply
  • PrinceGaz - Friday, January 7, 2005 - link

    I don't understand why anyone would want to buy a dual-core 6600GT rather than a similarly priced 6800GT. Reply
  • DerekWilson - Friday, January 7, 2005 - link

    I appologize for the omission of pictures from the article on publication.

    We have updated the article with images of the 3D1 and the K8NXP-SLI for your viewing pleasure.

    Thanks,
    Derek Wilson
    Reply

Log in

Don't have an account? Sign up now