In a big shift to their manufacturing operations – and a big political win domestically – TSMC has announced that the company will be building a new, high-end fab in Arizona. The facility, set to come online in 2024, will utilize TSMC’s soon-to-be-deployed 5nm process, with the ability to handle 20,000 wafers a month. And with a final price tag on the facility expected to be $12 billion, this would make it one of the most expensive fabs ever built in the United States.

Operating over a dozen fabs across the globe, TSMC is responsible for a significant share of global logic chip production, particularly with leading-edge and near-leading-edge processes. The company has become perhaps the biggest winner amidst the gradual winnowing of fabs over the past two decades, as manufacturer after manufacturer has dropped out, consolidating orders among the remaining fabs. And with GlobalFoundries dropping out of the race for cutting-edge manufacturing nodes, TSMC is one of only three companies globally that's developing leading-edge process nodes – and one of the only two that’s a pure-play foundry.

This success has become both a boon and a liability for TSMC. Along with Korean rival Samsung, the two companies have seen massive growth in revenues and profits as they have become the last fabs standing. As a result, TSMC serves customers both locally and globally, particularly the United States and China, the two of which are not enjoying the best of relations right now. This leaves TSMC trapped in the middle of matters – both figuratively and literally – as China needs TSMC to produce leading-edge chips, and the United States is now increasingly reliant on TSMC as well following GlobalFoundries’ retreat.

As a result, the Taiwan Semiconductor Manufacturing Company is going to do something it’s never done before, building a near-leading-edge fab in the US, outside of its home base of Taiwan. The new facility, set to be constructed in Arizona, will use the company’s 5nm process, which is currently TSMC’s most advanced manufacturing process. And while this will no longer be the case by the time it comes online in 2024, when 3nm processes are likely to be available, it would still make the Arizona facility among the most advanced fabs in the world, and by far the most advanced contract fab in the United States.

The Arizona facility would be joining TSMC’s other US fab, which is located in Camas, Washington. It, like TSMC’s other non-Taiwanese-fabs, is based around older technologies, with the Camas fab in particular focusing on building flash products using relatively large process nodes (350nm to 160nm). As a result, the Arizona fab represents a significant shift for TSMC; it’s not the first US fab for the company, but it’s the first time TSMC has built such an advanced fab in another nation.

All told, the Arizona fab is set to be a medium-sized facility – a “megafab” in TSMC parlance – despite its use of an advanced manufacturing node. The 20,000 wafers per month throughput of the fab is well below TSMC’s largest “gigafabs” in Taiwan, which can move more than 100,000 wafers per month. As a result while the fab will add to TSMC’s 5nm capacity, it won’t become a massive part of that capacity. Though with an expected price tag of $12 billion, it will still be a very expensive facility to build.

According to TSMC, the primary impetus for building the fab – and especially to build it in the United States instead of Taiwan – is specifically to have high-end production capacity within the United States. With GlobalFoundries dropping out of the race for leading-edge nodes, the US government and other sensitive fabless chip designers are in want of another leading-edge facility within the US to build their chips. Given their location, TSMC’s Taiwanese fabs are seen as security risk, and the US would prefer to be self-reliant rather than relying on a foreign partner – a concern that’s been magnified by the current coronavirus pandemic and the supply chain issues that has created.

The end result is that while the fab is not explicitly reserved for military and other sensitive chips, it’s hard to imagine a scenario where the big commodity chip manufacturers such as AMD and Qualcomm don’t continue to use TSMC’s larger and more efficient fabs in Taiwan. In other words, while the Zen processor you’re playing World of Tanks on isn’t likely to come from Arizona, the chip that goes into an actual tank just might. Unaspiringly then, the planned Arizona fab comes with a lot of interest and support from both Arizona and the US Government, for both strategic and business reasons.

Interestingly, while the desire for more domestic fabs within the US has been well known, the US’s two major domestic fabs find themselves on the outside looking in with this deal. Intel has long tried to lure customers to its own contract manufacturing business, including making pitches to the US government, with little luck. Meanwhile GlobalFoundries is currently the US government’s preferred fab for military hardware – inheriting those fabs and the resulting business from IBM – but whom faces the prospect of slowly losing business as government customers switch to newer manufacturing processes. So in some respects it’s a bit surprising to see outsider TSMC land such a deal, though there are sizable political concerns involved as well.

At any rate, TSMC’s Arizona fab is expected to break ground in 2021, with completion scheduled for 2024. At which point it is anticipated to employ over 1600 workers as TSMC becomes the United States’ second leading-edge foundry provider.

Source: TSMC

Comments Locked

97 Comments

View All Comments

  • FunBunny2 - Sunday, May 17, 2020 - link

    "The Xi regime doesn't play by any rule"

    So, since it was Little Bush who pushed to get China into WTO, then The Orange Julius can toss 'em out. Oh, wait.... his Big Bucks Bidnezz Men wouldn't like that, would they?
  • Spunjji - Monday, May 18, 2020 - link

    "The people with no rules will beat us, so we should abandon our rules" isn't a winning strategy, it's surrender. Adaptation is the name of the game, not imitation.
  • FunBunny2 - Sunday, May 17, 2020 - link

    "or worse a hypocrite that says no to domestic tax breaks and subsidies but has no problem buying the equivalent foreign made subsidized below cost products because of the cheaper price."

    And, just who might do that??? Did Beijing twist any CEO arms to get their production??? Of course not. Said CEOs were and are quite happy to screw the USofA if it means a few pennies in reduced labor. All that MAGA junk, and his ties, are Chinese. And most of his resort help is foreign. "Buy American, Hire American". You can take that to the bank.
  • Spunjji - Monday, May 18, 2020 - link

    Yeah I never understand this crap. Apparently pointing out crappy behaviours when you're not in a position of directly influencing them is hypocrisy, whereas wilfully engaging in them whilst stirring up resentment against the nations being exploited (not the people exploiting it) is... okay?
  • Spunjji - Monday, May 18, 2020 - link

    Nothing turns me off a comment faster than someone jumping on the "AOC is an idiot" meme train.
  • Lord of the Bored - Tuesday, May 19, 2020 - link

    I know. Their monitors aren't really so bad that we need to resort to namecalling.
  • peevee - Tuesday, May 19, 2020 - link

    Yeah, what's the point to restate the obvious?
  • Arsenica - Friday, May 15, 2020 - link

    Cuomo tried for years to get TSMC to build a fab in Utica, NY with generous tax incentives. What he lacked to make it happen was the threat of sanctions that the federal government just used.
  • shabby - Friday, May 15, 2020 - link

    Intel is going to cry foul anytime now.
  • AZBuyer - Friday, May 15, 2020 - link

    Any idea what area of AZ this plant will be built?

Log in

Don't have an account? Sign up now