Per-Key Quality Testing

In order to test the quality and consistency of a keyboard, we are using a texture analyser that is programmed to measure and display the actuation force of the standard keyboard keys. By measuring the actuation force of every key, the quality and consistency of the keyboard can be quantified. It can also reveal design issues, such as the larger keys being far softer to press than the main keys of the keyboard. The actuation force is measured in Centinewton (cN). Some companies use another figure, gram-force (gf). The conversion formula is 1 cN = 1.02 gf (i.e. they are about the same). A high-quality keyboard should be as consistent as possible, with an average actuation force as near to the manufacturer's specs as possible and a disparity of less than ±10%. Greater differences are likely to be perceptible by users. It is worth noting that there is typically variance among keyboards, although most keyboard companies will try and maintain consistency - as with other reviews, we're testing our sample only.

The machine we use for our testing is accurate enough to provide readings with a resolution of 0.1 cN. For wider keys (e.g. Enter, Space Bar, etc.), the measurement is taking place at the center of the key, right above the switch. Note that large keys generally have a lower actuation force even if the actuation point is at the dead center of the key. This is natural, as the size and weight of the keycap reduce the required actuation force. For this reason, we do display the force required to actuate every key but we only use the results of the typically sized keys for our consistency calculations. Still, very low figures on medium sized keys, such as the Shift and Enter keys reveal design issues and can easily be perceptible by the user.

Kailh’s switches are not quite the best in the market right now, but we usually get good quality figures when testing keyboards using them. Their switches may not be as good as original Cherry products, but they tend to perform well and are reliable. With an average force at the actuation point of 43.6 cN and a disparity of ±4.67% across the main keys, the Ultimate Hacking Keyboard is no exception to that rule. The force at the actuation point is slightly lower than the switch’s tipping point force, so our figures are spot-on for Brown-type switches. The Space Bar is virtually no different than the rest of the keys, as its mass is much smaller than that of a typical keyboard.

Hands-on Testing

I always try to use every keyboard that we review as my personal keyboard for at least a week. My typical weekly usage includes a lot of typing (about 50-100 pages), a few hours of gaming and some casual usage, such as internet browsing and messaging. I personally prefer Cherry MX Brown or similar (tactile) switches for such tasks, meaning that the Ultimate Hacking Keyboard should be, as far as the switches are concerned, ideal for my needs.

While the switches were great, it took me days to get partially acclimated to the 60% layout, even though I had used other split keyboards in the past. As end up using more than three different keyboards each day, it was difficult for me to generate muscle memory specific for the non-standard layout of the UHK. Those who are using just one keyboard daily will surely learn how to use the UHK efficiently much faster. Once I was used to the layout, I could work with the UHK about just as fast as I would with any good keyboard, yet not faster.

The 60% layout is meant to minimize finger movements and increase productivity, but having to resort to multi-key combinations actually slowed me down. I probably could not go any faster because I needed to switch to other keyboards during the day, or just because I have not been using the UHK long enough. An expert IT professional who will tailor the keyboard to his/her work environment and needs will probably become measurably more productive using it over a standard layout keyboard.

When it comes to gaming, the UHK may not be the most sensible choice, yet it works surprisingly well. Advanced gamers can reprogram the keyboard’s layouts and layers to generate game-specific commands and macros, while the split layout is especially useful to FPS gamers who can get rid of the right half completely and maximize their mouse space. It is not a keyboard developed specifically for gaming but it could work for professionals who enjoy combining business with pleasure.

The UHK Agent Software Final Words and Conclusion
Comments Locked

66 Comments

View All Comments

  • EmbeddedShire - Thursday, March 12, 2020 - link

    > unbiased user
    "I'm obviously biased", never pretended to be.

    I read the website daily but don't usually comment. Create the randomcommenter account back when I wanted to comment on one article I was interested in but for some reason the posts wouldn't get published in the comments section. Thought the name was too throw-away and got caught by some bot-filter or something so I made this other one.

    Logged in today after ages with my usual email address, posted my first comment - didn't see it go to the 2 second page and remember the previous pain, so I got into this other one. I rarely post stuff online.
  • PeachNCream - Thursday, March 12, 2020 - link

    In that case, please accept my apology for calling you out. I'm naturally suspicious of comments these days so it is easy to get caught up in those sorts of assumptions and then overreact.
  • EmbeddedShire - Thursday, March 12, 2020 - link

    cheers :)
    with the internet brimming with bots and fake accounts, it's normal
  • Droekath - Thursday, March 12, 2020 - link

    "The only real issue with the UHK is its unreasonably high price tag. It is currently retailing at $275 plus shipping, and this is without any of its accessories. The palm rest alone costs an additional $75"

    I'm surprised that no one at Anandtech is a r/mk. There's bound to be a few there typing away on their own unique creations. $300 is rather average for a custom-built keyboard. Some of the most expensive go for well over a thousand. Although I will admit that it's a niche hobby.
  • p1esk - Sunday, March 15, 2020 - link

    Yes, when I read "exorbitant price" I thought it would be closer to $999. I have Logitech G915 laying around somewhere, which I bought for $250. I have zero problem paying more than that for a great keyboard, even though I'm typing this on a $60 low profile Havit keyboard (chosen as the best out of five different low profile keyboards I tried).
  • Small Bison - Thursday, March 12, 2020 - link

    What's so "unique" about this keyboard to justify the $100 price premium over a Kinesis split keyboard with Cherry switches?
  • Hxx - Thursday, March 12, 2020 - link

    So no rgb I take and no volume rocker ? Lol darn it
  • mgulick - Thursday, March 12, 2020 - link

    I went from using an array of MS Natural keyboards for ~20 years to an ErgoDox EZ to the UHK. I didn't last long on the ErgoDox. Too much customization, and I could never remember the key layout. To be honest, I really like the printed keycaps on the UHK. It made learning to use it much faster. I've customized it a fair bit now, but most of the keycaps can be moved around, so the labels are still mostly correct. Its solid, reliable, and comfortable. The mod key and mouse keys are surprisingly useful. No wrist pain so far after a year and a half on it. It was honestly exactly what I was looking for. If you're used to a traditional split ergonomic keyboard but want the added comfort of mechanical switches, you can't go wrong with the UHK.
  • 1_rick - Thursday, March 12, 2020 - link

    "I didn't last long on the ErgoDox. Too much customization, and I could never remember the key layout. "

    You can get keycaps with labels on the ErgoDox.

    I've got one on order, myself--the Infinity, not the EZ--and a set of keycaps with lettering on most of them. I haven't had a chance to use it yet--I ordered it as a group by from Kono and it's taking forever, and now with COVID-19 I'm looking at at least a couple of extra months.
  • mgulick - Friday, March 13, 2020 - link

    I had the ErgoDox with the keycaps, but it was all the other keys that I struggled with, e.g. pgup, pgdown, home, end, insert. Even the lack of printed symbols above the numbers were frustrating, which despite using qwerty keyboards for 25+ years, I still occasionally need to look down for. The UHK not only has a full set of standard keycaps, but many of the special 'mod' mappings are printed on the side of the keycap facing you. There's a lot of attention to detail which I appreciate.

    That said, if I could get an ErgoDox with full printed keycaps, I'd be tempted to try it. I'm also tempted to try the Kinesis Advantage, but the UHK is adequately meeting all my needs right now. Also looking forward to the extra key cluster and trackpoint modules shipping soon.

Log in

Don't have an account? Sign up now