Fixed Function Changes & Scalability

Zooming out from the ALU, we’re seeing a higher-level block configuration that’s very similar to past Imagination PowerVR GPUs. The ALUs themselves are still housed in the larger cluster block that’s called the USC, or unified shading cluster. The USC along with various other fixed function blocks is in turn housed in an SPU, or shader processing unit, effectively the scaling block regularly referred to as a “core”.

Each SPU houses two USCs in the current IP configuration, meaning we have two clusters of 128-wide ALUs. This is valid for all AXT parts, but we imagine the AXM-8-256 unit just has a single USC. The AXT-16-512 is the smallest configuration with a fully populated SPU.

Each SPU has its own geometry pipeline, and up to two texture processing units. The A-Series carries over the per-TPU throughput design from the Furian architecture, meaning the block is able to sample 8 bilinear filtered texels per clock. The A-Series doubles this up now per SPU and the AXT models feature two TPUs, bringing up the total texture fillrate to 16 samples per clock per SPU.

The microarchitecture of the texture units has also evolved beyond just their throughput. A bigger improvement that Imagination is disclosing is the handling and location of the L0 cache. The L0 cache has been relocated within the texturing workflow to between the processing and filtering stages, allowing the L0 cache to hold the outputs of the processing stage, rather than the inputs. This allows for what Imagination calls significant data reuse, as texels don't need to be re-processed each time they're needed. And given how many times a texel may need to be sampled during anisotropic filtering, it's easy to see why. With the benefit of hindsight, this seems like an obvious improvement to make, but the company says that the design choices of the legacy configuration made sense at the time of conception and the workloads back then.

Imagination also talks about how the anisotropic filtering quality of the new architecture is much improved. In a set of comparison screenshots using a traditional texture tunnel, Imagination is showcasing that its new anisotropic filtering algorithms are far closer to being angle-independent – the ideal outcome for aniso filtering – as opposed to angle-dependent filtering with rather hard 90 degree angles on Rogue. Interestingly, Imagination is claiming that they've achieved this improved angle-independence even with fewer fewer samples, all of which serves to improve their efficiency and hardware density. With all of that said, since the comparison is against the Rogue architecture, I’m not entirely sure if it’s an actual novelty of the A-Series or rather a rehash of the anisotropic improvements that already got introduced in the 9XM series last year.

Another change in the fixed function units is found in the pixel pipeline, although superficially the throughput here doesn’t change compared to what we’ve seen on Furian. There’s still up to two PBEs with throughputs of up to 4 pixels per clock, and the design houses two such units for a total of 8 pixels per clock per SPU. There’s actually more internal distinction of the units though – at the front and back core it’s still able to handle 16 pixels per clock and also blend at 16 pixels per clock, although it’s limited on write out to 8 PPC on 1:1 pixel:texture situations.

Imagination’s doubling of the texture throughput whilst maintaining a steady pixel throughput means that the company is generally matching the decreasing pixel:texel fillrate throughput ratio we’ve also seen in other architectures such as from Qualcomm as well as the new Mali-G77, and now falls in at a 1:2 pixel:texel for the A-series.

Alpha blending is now done on a dedicated hardware unit in the pixel pipeline instead of being computed by the ALUs. The change results in higher performance through the use of fixed function hardware, allowing for things such as FP16 blending at full rate, and frees up the ALUs themselves so that they can use their computation resources on other work. Density is improved, but more importantly it’s also improving power efficiency as it’s avoiding using more expensive and less task-specific hardware for the same tasks.

It’s to be noted that for the AXM series, the company uses customized fixed function units that are more area efficient, rather than just only scaling the numbers of units.

Scaling Things Up

With the SPU being the coarsest scaling block of the architecture, Imagination is building larger GPU configurations by simply adding in more SPUs. Essentially this is the “core” scaling of Imagination's GPU designs.

Scaling of SPUs across the AXT line happens in multiples of 16-512 across the range, both in terms of their product names as well as their texture and FLOPs/clock capabilities, which is rather simple to grasp and very quickly understand a configuration’s capabilities. As mentioned in the introduction, Imagination views the AXT-32-1024 as being the most popular choice for vendors targeting the high-end premium smartphone SoC segment, which possibly some vendors opting to go with the AXT-48-1536 for a larger area and lower clock speeds for more efficiency. The AXT-64-2048 would be a really big GPU which the company could build if there’s costumer interest.

PowerVR GPU Comparison
  AXT-16-512 GT9524 GT8525 GT7200 Plus
Core Configuration
 
1 SPU (Shader Processing Unit) - "GPU Core"

2 USCs (Unified Shading Clusters) - ALU Clusters
FP32 FLOPS/Clock

MADD = 2 FLOPs
MUL = 1 FLOP
512

(2x (128x MADD))
240

(2x (40x MADD+MUL))
192

(2x (32x MADD+MUL))
128

(2x (16x MADD+MADD))
FP16 Ratio 2:1 (Vec2)
Pixels / Clock 8 4
Texels / Clock 16 8 4
Architecture A-Series
(Albiorix)
Series-9XTP
(Furian)
Series-8XT
(Furian)
Series-7XT
(Rogue)

Comparing the smallest AXT-16-512 configuration with a single SPU and two USCs against similar configurations across the generations, we indeed see that the new A-Series does bring large architectural changes.

Imagination is marketing a 4x increase in ALU throughput, but again that’s against the 9XM GPUs, which are equal in ALU configuration to the Series-7XT in the table. However, it’s not to say that the increases aren’t any less impressive when comparing to the previous 9XTP family; a rise from 240 FLOPs/clock to 512 is still a 2.13x increase.

I think what’s actually more important to note here is the architecture has very big building blocks. At 512 FLOPs and 8 pixels per clock, an AXT SPU is significantly bigger than an Arm Mali-G77 core which comes in at “only” 64 FLOPs/clock and 2 pixels per clock, meaning an AXT core is roughly equivalent to eight G77 cores in computational power and four G77s in fillrate throughput, which is a massive difference in terms of design scaling. Naturally, in terms of effective density and power efficiency, few big cores will always win over a flock of small cores, as demonstrated by Qualcomm and Apple’s recent 2- and 4-core designs.

New ISA & ALUs: An Extremely Wide Architecture HyperLane Technology, Other Additions
POST A COMMENT

143 Comments

View All Comments

  • vladx - Wednesday, December 4, 2019 - link

    Lol taking the words of a shady company like Apple as a fact, good one melgrosss. Reply
  • s.yu - Wednesday, December 4, 2019 - link

    Championing a shady company like Huawei, good one vlad. Reply
  • name99 - Tuesday, December 3, 2019 - link

    Andrei is as close to correct as one can hope to be.

    All we ACTUALLY know is that PowerVR has NEVER sued Apple. They said some pissed off things in a Press Release, then mostly took them back in a later Press Release.
    And Apple said it would cease to pay to *royalties* to Imagination within a period of 15 months to two years.

    It is possible that Apple created something de novo that's free and clear of IMG and that's that.
    It's also possible that Apple paid (and even continues to pay?) IMG large sums of money that are not "royalties" but something else (IP licensing? patent purchase? ...).
    We have no idea which is the case.

    Apple is large enough that the money paid out could be hidden in pretty much any accounting line item. IMG is private so have no obligation to tell us where their money comes from.
    Reply
  • mode_13h - Wednesday, December 4, 2019 - link

    Yeah, it could've been a one-time lump sum payment. That's not technically "royalties". Reply
  • lucam - Tuesday, December 3, 2019 - link

    Very true. If you were to run GFXBENCH on the new iPhone 11PRO with the A13, you will see that the gldrivers are all powervrs and IMGtc just the previous A12. Exactly the same. So in my mind the A13 still has some form of PowerVR design in it. Reply
  • vladx - Wednesday, December 4, 2019 - link

    Don't kid yourself, Apple tried to buy IMG Tech on the cheap and I'm glad Imagination refused their insulting offer. Reply
  • lucam - Wednesday, December 4, 2019 - link

    To be honest I think Apple still has some PowerVR design into the current chips, even in the A13, otherwise I can't explain why it appears the GLdrivers (PowerVR, img texture text etc) when I run the GFX bench....
    I think Apple and Imagination still have in somehow some form of good relationship behind...
    Reply
  • s.yu - Tuesday, December 3, 2019 - link

    "ISO-area and process node comparison"
    Goddamn. So refreshing to see a comparison under such standard conditions yet still showing up in footnotes. This is the industry that I recognize, not Huawei's deceitful comparison during the launch of GPU Turbo with age old design and age old architecture *without* due clarification for months.
    Reply
  • Sychonut - Tuesday, December 3, 2019 - link

    Now imagine this, but on 14+++++++. A beauty. Reply
  • mode_13h - Tuesday, December 3, 2019 - link

    > There are very few companies in the world able to claim a history in the graphics market dating back to the “golden age” of the 90’s. Among the handful of survivors of that era are of course NVIDIA and AMD (formerly ATI), but there is also Imagination Technologies.

    Well... if you're going to count ATI, who got gobbled up by AMD, then you might also count Qualcomm's Adreno, which came from BitBoys Oy and passed through ATI/AMD.
    Reply

Log in

Don't have an account? Sign up now