The AMD TRX40 Motherboard Overview: 12 New Motherboards Analyzed
by Gavin Bonshor on November 28, 2019 9:00 AM EST- Posted in
- Motherboards
- AMD
- MSI
- Gigabyte
- ASRock
- Asus
- TRX40
- Threadripper 3000
- Castle Peak
GIGABYTE TRX40 Aorus Pro WIFI
Moving our way down the GIGABYTE TRX40 product stack, we have the GIGABYTE TRX40 Aorus Pro WIFI which represents its entry-level model at launch with a good feature set but drops some of the higher-end components to undoubtedly save users money who may not need or require things like 10 GbE. This doesn't mean the feature set isn't good quality as there is an Intel AX200 Wi-Fi 6 wireless interface, three PCIe 4.0 x4 M.2 slots, and support for DDR4-4400 memory across eight slots.
The GIGABYTE TRX40 Aorus Pro WIFI and TRX40 Master share a very similar aesthetic with black metallic heatsinks on an all-black PCB, although the GIGABYTE TRX40 Aorus Pro WIFI is using a standard ATX sized PCB. There are eight memory slots which support up to DDR4-4400 and up to 256 GB in total, with two sets of four slots flanking either side of the sTRX4 CPU socket. All three of GIGABYTE's launch day TRX40 boards are using the high-end Infineon XDPE132G5C 16-phase PWM controller operating at 12+2. The CPU section of the power delivery is a 14-phase design which consists of twelve Infineon TDA21472 70 A power stages for the CPU. Providing power to the CPU is an 8-pin and 6-pin pair of 12 V ATX CPU power inputs.
Cooling the TRX40 chipset is an actively cooled heatsink, while the boards three PCIe 4.0 x4 M.2 slots each include an M.2 heatshield. For users looking to use SATA drives, the GIGABYTE TRX40 Aorus Pro WIFI has eight SATA ports which support RAID 0, 1, and 10 arrays, and are controlled by the TRX40 chipset. Located around the board is eight 4-pin headers which are split into three main sections; one for a CPU fan, one for a water pump, and six for chassis fans. Utilizing as many of the PCIe lanes from the CPU are four full-length PCIe 4.0 slots which operate at x16/x8/x16+x8, with a single PCIe 4.0 x1 slot for good measure.
Unlike the other models in the GIGABYTE TRX40 product stack, the TRX40 Aorus Pro WIFI has a single Ethernet port controlled by an Intel Gigabit controller. For users looking for wireless support, GIGABYTE has included an Intel AX200 Wi-Fi 6 wireless interface which also features BT 5.0 connectivity. Looking at USB support and there is five USB 3.1 G2 Type-A, one USB 3.1 G2 Type-C, and four USB 2.0 ports. Nestled on the left-hand side of the USB 3.1 G2 Type-C port is a small Q-Flash Plus button, while the five 3.5 mm audio jacks and S/PDIF optical output are powered by a pair of Realtek HD audio codecs; an ALC4050H and an ALC1220-VB.
The GIGABYTE TRX40 Aorus Pro WIFI isn't as high-end as its other launch day counterparts, but it still offers a cheaper alternative to users looking to utilize the high core count and power of the Threadripper 3000 processors with an MSRP of $399. Users looking to build a high-core high-thread-count gaming system will be hard pushed to find a better value TRX40 model at launch.
Facebook
Twitter
RSS
109 Comments
View All Comments
PopinFRESH007 - Sunday, December 29, 2019 - link
PCIe is a serial point to point topology so each link or "lane" is independent (ignoring things like PCIe switches). This is different to the legacy PCI bus which is a shared parallel bus which would behave as you've described.Dionysos1234 - Thursday, November 28, 2019 - link
Any information on what memory is supported? ECC?Llawehtdliub - Saturday, November 30, 2019 - link
Yes ECC is supportedVatharian - Thursday, November 28, 2019 - link
Has anyone from ASUS actually thought even for a second about the PCI-Express slots placement? Using dual GPUs, until converted truly to single slot with water cooling, blocks most of the slots. In my case I'd need 4 or 5 slots, which leaves ROG Zenith II Extreme from their linup. And ASRock Creator. As much as I hate Gigabyte I must admit their Aorus line has sensible layouts, and MSI's are mixed bag.nevcairiel - Thursday, November 28, 2019 - link
These boards are clearly not designed for Dual GPU purposes, but instead actually offer quite some space for the primary GPU (3 slots is mandatory for many high-end air cooled cards these days), and additional slots for other 1 slot cards.eek2121 - Friday, November 29, 2019 - link
Nearly every board I looked at in the article has spacing for multiple GPUs.eek2121 - Friday, November 29, 2019 - link
I noticed you said 3 slots. I have a high end GPU, it takes 2 slots. The 3rd slot is extremely far away from the 2nd slot and could comfortably fit a GPU. Factor in the width of an m.2 drive when looking at the pictures above and you'll realize you are mistaken (many of the boards have m.2 slots in between, That is all the space you need for air cooling a GPU, since most high end hardware only takes up 2 slots, the 3rd 'slot' is actually where an M.2 drive would sit, and the real third slot is below it, leaving plenty of space for cooling fan air circulation).Spunjji - Friday, November 29, 2019 - link
Serious question - are dual-GPUs even used these days?I know they're out for gaming, but I don't know the state of play regarding GPU compute.
Bccc1 - Friday, November 29, 2019 - link
For GPU rendering (e.g. Redshift, Octane and VRay Next) dual GPUs are quite common and even quad GPUs can be used quite efficiently.eek2121 - Friday, November 29, 2019 - link
I don't kow about the "blocking most of the slots" terminology. On my X399 board, only 1 slot is blocked (and technically you still could put a card in that slot, I actually had a low profile x4 card next to my GPU without any heat issues). On many X570 boards, spacing is such that no slots are blocked. In both cases, there are single slot GPUs, just not high end ones. As you've stated, using a custom loop allows for even high end GPUs to use only 1 slot.