This morning the Raspberry Pi Foundation took the wraps off of their next generation hobbyist project computer, the Raspberry Pi 4. The eagerly anticipated update to the Raspberry Pi lineup – which is actually arriving a bit ahead of schedule due to some good fortunes in SoC development – offers a significant upgrade to the family thanks to its new 28nm Broadcom SoC, which among other things incorporates a more powerful quad Arm Cortex-A72 CPU cluster. The single-board computer is available now, and like its predecessors, prices start at $35.

Long a favorite for tinkers, makers, and anyone else looking for a project board or a simple computer, the Raspberry Pi family has been around since 2012. Its last full update was in 2016, when the Foundation released the Raspberry Pi 3. In the intervening three years the technology landscape has changed a fair bit, and so has the underlying hardware of the Pi. While still based on Broadcom SoCs, the new Pi incorporates Broadcom’s BCM2711, a 28nm SoC with a quad Cortex-A72 setup along with the company’s VideoCore VI GPU. While the GPU remains nothing to write home about – the Raspberry Pi Foundation prioritizes an open GPU first and foremost – the CPU upgrade is far more interesting. This update replaces the old Cortex-A53 CPU cores with cores from Arm’s much faster high-performance line of out-of-order execution cores. As a result, even with a clockspeed of just 1.5GHz, the Pi 4 is a good deal faster than the Pi 3, not to mention faster than even some mid-range smartphones.

Raspberry Pi
  Raspberry Pi 4
SoC Broadcom BCM2711

4x Cortex-A72
@ 1.5GHz

VideoCore VI
@ 500Mhz
DRAM 1/2/4GB LPDDR4
Storage microSD
Networking 1x Gigabit Ethernet
802.11ac
BT 5.0
USB 2x USB-A 3.0
2x USB-A 2.0
Video Output 2x HDMI 2.0 Type-D
GPIO 17 Pins
Power USB-C (Suggested: 15W, 5.1V/3A)
Dimensions 85.6mm x 56.5mm x 17mm
Price 1GB: $35
2GB: $45
4GB: $55

I/O has also received a much-needed upgrade for the latest Pi. The new SoC brings with it USB 3 support, giving the platform access to SuperSpeed USB data rates for the first time. HDMI support has been similarly bumped to 2.0 (meaning 4K output support), and fittingly, the board can now decode H.264 and H.265 video (another first) at resolutions up to 4K. Networking performance has been upgraded as well with the addition of a full-speed Gigabit Ethernet port, and joining the 802.11ac radio is support for Bluetooth 5.0.

All told, the Foundation is selling 3 different versions of the Raspberry Pi 4, depending on the memory configuration. The $35 model comes with 1GB of LPDDR4, while 2GB and 4GB models are available for $45 and $55 respectively. Which in the case of the latter two models is a significant shot in the arm for the board, as now they have two to four times the memory to play with.

Meanwhile, our sister site Tom’s Hardware already has an early review out, confirming much of what you’d expect from the Raspberry Pi 4 based on the specifications. CPU, memory, and storage performance are all greatly improved over past models, though power consumption has gone up a bit in the process.

Source: Raspberry Pi Foundation

POST A COMMENT

65 Comments

View All Comments

  • Samus - Wednesday, June 26, 2019 - link

    It's amazing how cheap this thing actually is. Mid-range smartphone internals (essentially a smartphone without a screen\camera\battery) for $55? Reply
  • AntonErtl - Wednesday, June 26, 2019 - link

    It's interesting that this SoC uses four Cortex-A72 rather than the smaller and similarly-performing A73 cores.

    It's also interesting the they manage to sell the Raspi 4 at $55 for the 4GB model, while, e.g., the RockPro64 (with 2 A72 + 4 A53) and the Odroid N2 (with 4 A73 + 2 A53) cost quite a bit more with 4GB; and the Odroid N2 is also quite a bit more expensive than the Odroid C2. The Rockpro64 and Odroid N2 are also quite a big bigger and allow or include better cooling. I guess they use the increased board space for more/better connectors, but I have not checked. One difference is that the Raspi4 will keep its 32-bit ecosystem for compatibility back to the first Raspi, while the other SBCs primarily support 64-bit software.
    Reply
  • Threska - Wednesday, June 26, 2019 - link

    Backwards compatibility with all the HATS is the main reason for that. Otherwise they could have gone with a bigger board. Reply
  • Magnus101 - Saturday, June 29, 2019 - link

    "This update replaces the old Cortex-A53 CPU cores with cores from Arm’s much faster high-performance line of out-of-order execution cores"

    Which probably will make Raspberry Pi vulnerable for attacks like Specter and Meltdown (and many other attacks of the same type).
    Would be especially bad in some very common use cases, like mediaserver or some iot-duties, since the performance hits will be much worse when the network is accessed.
    This was something Rasperry Pi wasn't affected by since the former CPU:S didn't have out-of-order execution.
    https://www.raspberrypi.org/blog/why-raspberry-pi-...
    Reply
  • mode_13h - Sunday, June 30, 2019 - link

    How do you know the new Pi hasn't been patched in hardware? If not, its kernel will certainly have the patch. Reply

Log in

Don't have an account? Sign up now