ASUS ROG Strix X570-E Gaming

ASUS's Strix brand represents its more mid-range gaming focused offerings and the ASUS ROG Strix X570-E Gaming is one of two ATX sized Strix branded boards, with the X570-E being the more premium of the two models; the other being the slightly lower spec ASUS ROG Strix X570-F Gaming. Included is support for two-way NVIDIA SLI and up to three-way AMD CrossFire multi-graphics cards configurations, 2.5 Gigabit networking, and a Wi-Fi 6 wireless interface.

The ASUS ROG Strix X570-E includes the gaming-focused Realtek RTL8125G 2.5 Gigabit NIC with a second port controlled by an Intel I211-AT Gigabit NIC. The board's wireless capabilities come from the new Intel AX200 Wi-Fi 6 802.11ax adapter. The board boasts three full-length PCIe 4.0 slots which operate at x16, x8/x8, and x8/x8/x4, with the final four coming directly from the X570 chipset. The Strix themed chipset heatsink has two M.2 heatsinks emanating from the top and bottom side for the boards dual PCIe 4.0 M.2 and has a cooling fan integrated which is designed to keep the X570 chipset cool. The ROG Strix X570-E also has eight SATA ports and four DDR4 memory slots with support for up to 128 GB.

In terms of USB connectivity on the rear panel, there are three USB 3.1 G2 Type-A, one USB 3.1 G2 Type-C, and four USB 3.1 G1 Type-A ports. A SupremeFX S1220 HD audio codec powers the five color-coded 3.5 mm jacks, and an S/PDIF optical out, while a pair of video outputs consisting of an HDMI 2.0 and DisplayPort 1.2 output is featured. A handily located BIOS Flashback button and a single USB 3.1 G1 Type-A dedicated to this are clearly highlighted, and the ROG Strix X570-E also benefits from dual Ethernet ports with one being controlled by a Realtek RTL8125-CG 2.5 Gigabit NIC, while the other is driven by an Intel I1211-AT Gigabit NIC. There are also two antenna inputs for the Intel AX200 802.11ax Wi-Fi 6 wireless interface which also adds BT 5 connectivity into the mix.

The ASUS ROG Strix X570-E Gaming has an MSRP of $330 and represents its bridge between the mid-range and the higher end Crosshair VIII models. With Wi-Fi 6, 2.5 Gigabit + 1 Gigabit NICs and a SupremeFX S1220A HD audio codec and two-way NVIDIA SLI support, users looking for a high-quality ASUS X570 model may not have to look further than the Strix X570-F.

ASUS ROG Crosshair VIII Impact ASUS ROG Strix X570-F Gaming
POST A COMMENT

231 Comments

View All Comments

  • npz - Tuesday, July 9, 2019 - link

    Well, you do have one choice, the GIGABYTE X570 Aorus Xtreme is fanless.
    I doubt they are that loud as they were in the past though, as it's a variable speed fan now.
    Reply
  • FreckledTrout - Tuesday, July 9, 2019 - link

    I'm waiting for the next iteration of board for this reason. I'm speculating the next round the chipset will be on 7nm. Reply
  • abufrejoval - Tuesday, July 9, 2019 - link

    The genious about that chiplet design is that the chipset doesn't actually benefit nearly as much from the shrink, as pure logic or SLC caches: The monolithic guys pay the 7nm overhead (e.g. EUV) for I/O while the geometry of the transistors in the I/O area is mostly determined by the need to power long motherbord or even slot traces.

    So while waiting is never a bad idea when your need clearly isn't overwhelming you, waiting for that shrink could turn out rather long. These days I/O heave chips might never be done in smaller geometries, because of that and because packaging has matured.
    Reply
  • Mr Perfect - Tuesday, July 9, 2019 - link

    Yeah, I'm having flashbacks over here. Weedy little fans screaming along at 6000RPM, then choking up on a dust bunny or wearing out the bearing.

    Do we know what process they used for the X570? Is it the same 55nm they used for the X470? Here's hoping they shrink it a little for X670.
    Reply
  • DigitalFreak - Tuesday, July 9, 2019 - link

    14nm Reply
  • erotomania - Tuesday, July 9, 2019 - link

    55nm Reply
  • DanNeely - Wednesday, July 10, 2019 - link

    no. X470 and below were 55nm (designed by ASMedia on an ancient process to keep everything cheap as dirt), X570 was done in house on 14nm. Ryzen 3's IO die is also 14nm (the much larger Epyc one was done at 12nm). Reply
  • erotomania - Wednesday, July 10, 2019 - link

    Weedy, man! Those weedy fans Reply
  • sing_electric - Wednesday, July 10, 2019 - link

    Given how little chipsets benefit from process shrinks, some part of me honestly wonders if there's any sense in going even further back to the future and dividing the chipset into a north/southbridge (or some other similar config) so that the heat can at least be spread out, getting rid of the need for a failure-prone mechanical part on your motherboard. Reply
  • YoloPascual - Tuesday, July 9, 2019 - link

    z77 extreme 4 to x570 extreme 4 👊👊 Reply

Log in

Don't have an account? Sign up now