=<em>F-A-S-T</em>= DDR Memory: 2-2-2 Roars on the Scene
by Wesley Fink on August 5, 2004 12:05 AM EST- Posted in
- Memory
Test Results: Corsair 3200XL PRO
To be considered stable for test purposes Quake3 benchmark, UT2003 Demo, Super PI, Aquamark 3, and Comanche 4 had to complete without incident. Any of these, and in particular Super PI, will crash a less-than stable memory configuration. We have included results for RCW-ET using the Radar benchmark.| Corsair 3200XL PRO (DDR400) - 2 x 512Mb Double-Bank | ||||||
| Speed | Memory Timings & Voltage | Quake3 fps | Sandra UNBuffered | Sandra Standard Buffered | Super PI 2M places (time in sec) |
Wolfenstein - Radar - Enemy Territory fps |
| 400DDR 800FSB |
2-2-2-5 2.5V |
326.4 | INT 2900 FLT 2942 |
INT 4525 FLT 4532 |
128 | 70.8 |
| 433DDR 866FSB |
2-2-2-5 2.75V |
353.0 | INT 3069 FLT 3148 |
INT 4852 FLT 4875 |
119 | 77.0 |
| 466DDR 933FSB |
2-3-3-6 2.75V |
369.1 | INT 3237 FLT 3219 |
INT 5181 FLT 5196 |
113 | 80.6 |
| 500DDR 1000FSB |
2.5-3-3-7 2.75V |
394.1 | INT 3346 FLT 3379 |
INT 5568 FLT 5575 |
106 | 86.8 |
| 506DDR 1012FSB |
3-4-4-7 2.85V |
N/A | N/A | N/A | N/A | N/A |
Corsair 3200XL was able to run at 2-2-2-5 timings all the way to DDR450, something you would never see with Winbond BH5 modules in the past. 3200XL topped out at DDR506 at much slower timings than required at DDR500. As a result, there was no point to running DDR506 benchmarks as they would have been lower than DDR500 results.
More information on the performance of 3200XL is available in the Corsair launch review. As the manufacturer who started it all with DDR400 2-2-2 memory about 6 weeks ago, Corsair is the brand to which every memory in this roundup must be compared.
Facebook
Twitter
RSS
47 Comments
View All Comments
Hasse - Friday, November 26, 2004 - link
Hi!I'm rather confused when I check my bios for all the abreviations.. TRC, TRAS.... it would be nice to know what to set them all to, I've got the Asus A8V Deluxe board.. and probably ain't the same bios view or settings that msi or others have. I've tried to overclock but the dang thing just hangs and creates not so funny looking bios boot images... Anyway thanx for a nice review. I've made my choice on memory based on it...
adamofwales - Thursday, November 11, 2004 - link
Quite easily, I must say,this is the BEST article about memory I have ever read.
Well done.
googles - Tuesday, October 19, 2004 - link
i cant find a crucial ballistix pc3200 @ 2-2-2-5 timings.according to their website,
http://www.crucial.com/ballistix/store/listmodule....
BL6464Z402 DDR PC3200 • 2-3-2-6 • Non-parity • DDR400 • 2.8V • 64Meg x 64
they only have a ddr400 ballistix @ 2-3-2-6, is this the ram that AT evaluated?
somekid617 - Thursday, September 23, 2004 - link
i got the ocz 3200 rev.2 and its great!somekid617 - Thursday, September 23, 2004 - link
mbor - Thursday, August 26, 2004 - link
#323Suns, 2-2-2-5 doesn't mean it takes 5 cycles every 4th fetch. The paramenters are:
CAS Latency-RAS to CAS Delay-RAS Precharge-Cycle Time (Tras).
The names actually vary depending on the source. I quote the names used in CPU-Z, as I think they're well establisheed. You should easily find the description of each of these in online references.
fritz64 - Monday, August 16, 2004 - link
babyelfPlease let us know your Optimum latency, memory speed and Voltage setting. I should receive mine today.
babyelf - Saturday, August 14, 2004 - link
Got my 3200 ballistix.. ran 2.65 at DDR410 at 2-2-2-11 and primed blend for 15 hoursnow running DDR420 at 2-2-2-11 at 2.7V
i'll try to go more later after i burn in at this speed
fritz64 - Friday, August 13, 2004 - link
#37 and #38I just ordered my 512MB x2 Crucial ballistix memory for my A64 3500+. I'm hoping to get 2-2-2-10@2.75V for at least 220MHz on Abit AV8 socket 939. I will let you guys know what I have later once I get my hands on those sticks. This will be an acid test for the information that we receive on Anandtech.
Fleabit - Thursday, August 12, 2004 - link
Wasn't so happy with my 2 * 512MB Ballistix either. couldn't get them to run dual channel stable at DDR 400 at 2-2-2-8 on an NF7-S v2.0 using the rated voltage.Memtested each of the dimms individually, at 2-2-2-8 @2.8v they max'd at 212 and 205.
At least crucial have a good RMA service :)
Has anyone had good experiences?