Retail drives based on the Silicon Motion SM2262EN controller have arrived. The ADATA SX8200 Pro and HP EX950 are nearly identical drives that are replacing last year's flagship models from both brands.

Silicon Motion's first NVMe SSD controller felt very much like a version 1.0 product. Despite any PR and marketing to the contrary, none of the products which used that SM2260 controller were able to compete with high-end drives like those from Samsung. Silicon Motion (SMI) followed it up last year with a second generation of controllers that completely changed the game: drives using the high-end SM2262 controller were able to set several performance records while being far more affordable than NVMe SSDs from the top brands. Now a new wave of high-end SMI-based drives has arrived, powered by the SM2262EN controller, a minor update to the SM2262 that makes it essentially version 2.1 of Silicon Motion's NVMe controller architecture.

Comparing and Contrasting Two Near-Identical High-End Drives 

Last year we reviewed an engineering sample of the SM2262EN platform with an early firmware version. Today we're looking at two final retail products based on the same controller. The ADATA XPG SX8200 Pro and HP EX950 are direct replacements for two of the most successful NVMe SSDs from last year (the SX8200 and EX920, which used the older SM2262 controller). Together, those two drives have dominated the consumer NVMe market for almost a year with the best combination of high performance and reasonable prices.

Silicon Motion still hasn't detailed what if any hardware changes the SM2262EN brings; it's still an 8-channel NVMe controller with a PCIe 3.0 x4 host interface and a pair of Arm Cortex-R series processor cores. What has changed drastically is the firmware, which Silicon Motion has tuned to provide the highest peak performance possible. This lets drive vendors advertise performance specs that rival the fastest flash-based SSDs on the market, but those specs usually don't have much relation to real-world performance. SM2262EN controller and firmware platform makes very different tradeoffs than the SM2262, and the improvements to peak performance on the SM2262EN have unavoidable costs elsewhere.

Silicon Motion SM2262(EN) Controller Block Diagram

The most significant advertised improvements for SM2262EN drives over their predecessors are to write speeds, with both sequential and random write performance increasing by 50% or more. Sequential and random reads have also improved, but by a more modest 10–20%. Aside from these changes, the new SM2262EN drives are drop-in replacements for the outgoing models, with similar write endurance and power consumption ratings. Prices are higher for the new models due simply to their novelty, but we expect them to fall back down to the same levels as their predecessors once supplies of the older models start to dry up (and this is already happening for some capacities).

The ADATA XPG SX8200 Pro

ADATA's gaming brand, XPG, has now been releasing storage drives for a number of generations. The older SX8200 was popular, and in December the company launched an entry level SX6000 Lite for the low cost market. The SX8200 is set to spring as an XPG performance drive, offering capacities from 256GB to 2TB.

ADATA XPG SX8200 Pro Specifications
Capacity 256 GB 512 GB 1 TB
(1024 GB)
2 TB
Controller Silicon Motion SM2262EN
NAND Flash Intel/Micron 64L 3D TLC
Form-Factor, Interface double-sided M.2 2280 PCIe 3 x4 NVMe 1.3
Sequential Read 3500 MB/s 3500 MB/s 3500 MB/s TBD
Sequential Write 1200 MB/s 2300 MB/s 3000 MB/s TBD
Random Read 220k IOPS 390k IOPS 390k IOPS TBD
Random Write 290k IOPS 380k IOPS 380k IOPS TBD
Warranty 5 years
Write Endurance 160 TB
0.34 DWPD
320 TB
0.34 DWPD
640 TB
0.34 DWPD
TBD

The first three drives are first out of the gate, while the 2TB model will be on shelves later this year. For this review, we are testing the 1TB model, which uses the SM2262EN controller and IMFT 64-layer 3D TLC NAND.

The HP EX950

 

Normally HP is a name users might associate with pure OEM builds and designs, however the company has two avenues for its SSD business: to itself for its own systems, or directly to system integrators or end users. As with the other drive in this test, the EX950 is replacing a very popular drive, the EX920. HP will be offering three models, from 512GB to 2TB.

HP EX950 Specifications
Capacity 512 GB 1 TB
(1024 GB)
2 TB
(2000 GB)
Controller Silicon Motion SM2262EN
NAND Flash Intel/Micron 64L 3D TLC
Form-Factor, Interface double-sided M.2 2280 PCIe 3 x4 NVMe 1.3
Sequential Read 3500 MB/s 3500 MB/s 3500 MB/s
Sequential Write 2250 MB/s 2900 MB/s 2900 MB/s
Random Read 390k IOPS 410k IOPS 410k IOPS
Random Write 370k IOPS 370k IOPS 380k IOPS
Power Consumption Active 5.21 W 6.93 W 6.93 W
Idle 0.73 W 0.73 W 0.73 W
Warranty 5 years
Write Endurance 320 TB
0.34 DWPD
650 TB
0.36 DWPD
1400 TB
0.38 DWPD

All three drives are being launched simultaneously, using the SM2262EN controller and IMFT's 64-layer 3D TLC NAND. For this review, we have the 1TB and 2TB drives for testing.

Similarities and Differences

The specifications for the ADATA and HP drives are very similar, but there are a few minor differences. HP has dropped the 256GB model, so their lineup now starts at 512GB. Both companies have added a 2TB model, though ADATA's 2TB is not yet available and thus we don't have exact performance and endurance numbers for that one. ADATA's sequential and random write speed ratings are slightly higher, and HP's random read ratings for the 1TB and 2TB models are a bit higher. The 2TB HP EX950 is a bit unusual by offering only about 2000GB of usable space, when the smaller capacities and the ADATA drives use standard power of two capacities (~1024GB for the 1TB models). Furthermore, the 2TB HP EX950 is actually about 310MB smaller than a typical 2000GB drive.

As usual, ADATA also has a more gamer-oriented model called the XPG GAMMIX S11 Pro, which differs only by the inclusion of a fancier heatspreader. The SX8200 Pro ships with a flat black heatspreader for the user to install, and the HP EX950 has no heatspreader except what is built in to the controller package.


ADATA 1TB, HP 1TB, HP 2TB

The ADATA SX8200 Pro and HP EX950 use slightly different PCBs from each other, but matching the board layouts for their predecessors. ADATA has customized the layout a bit more, putting the controller a bit closer to the M.2 connector and more of the small power regulation components between the controller and NAND. The HP drives have a layout that is very close to Silicon Motion's reference design, down to the pair of LEDs in the middle of the card that blink when the drive is active. These drives are all double-sided, so they are not intended for use in the thinnest ultrabooks.

The 2TB engineering sample we tested last year used DDR4 DRAM, but neither of the retail products makes the switch from DDR3. The 1TB samples all use Nanya DRAM but the 2TB EX950 uses denser Micron DRAM. HP usually puts their own logo onto SMI controllers, but our review samples use the standard packaging with Silicon Motion's logo and part numbers. ADATA does their own NAND binning and puts their logo on the packages. The HP drives are using unbranded packages with standard IMFT part numbers for their 64-layer 3D TLC NAND.

AnandTech 2018 Consumer SSD Testbed
CPU Intel Xeon E3 1240 v5
Motherboard ASRock Fatal1ty E3V5 Performance Gaming/OC
Chipset Intel C232
Memory 4x 8GB G.SKILL Ripjaws DDR4-2400 CL15
Graphics AMD Radeon HD 5450, 1920x1200@60Hz
Software Windows 10 x64, version 1709
Linux kernel version 4.14, fio version 3.6
Spectre/Meltdown microcode and OS patches current as of May 2018
SLC Cache Sizes & SYSmark 2018
POST A COMMENT

39 Comments

View All Comments

  • cassiohui - Thursday, February 07, 2019 - link

    Hi Billy, just wondering, why is the 970 pro not in the graphs when even the 900p is? Reply
  • Death666Angel - Thursday, February 07, 2019 - link

    They have stated on Twitter and in the comments before that they did not receive a 970 Pro review sample. Reply
  • cassiohui - Thursday, February 07, 2019 - link

    960 pro maybe? Reply
  • mapesdhs - Thursday, February 07, 2019 - link

    Pity they don't just buy them in themselves to do the tests anyway. I'd put more faith in data that
    hasn't come from free samples. :)
    Reply
  • Billy Tallis - Thursday, February 07, 2019 - link

    CPU, GPU and DRAM vendors can in theory sample chips that will overclock better than the average retail item, but there's no easy way for SSD vendors to cheat on performance with careful sampling. And the number of drives that don't survive my testing strongly suggests that they aren't doing any sort of extra QA before sending samples to me. Reply
  • jahid - Thursday, February 07, 2019 - link

    Thanks for your valuable writing. HP some model availble in https://www.startech.com.bd/component/SSD-Hard-Dis... Reply
  • ballsystemlord - Thursday, February 07, 2019 - link

    Well, I will not be purchasing an EX950. That is for sure. I'm bound to run the SLC down quite a bit and then performance will tank. Reply
  • KAlmquist - Sunday, February 10, 2019 - link

    These drives are mostly of interest to people who need odd sized drives. For example, if you need a 600GB drive, you probably have to buy a 1TB drive and only use 600GB of it. Either of the 1TB drives should perform reasonably in this scenario. You might still have to tweak the power saving settings to avoid putting the drive to sleep too frequently (due to the huge wakeup time), but the active idle power is less that one watt. Reply
  • dromoxen - Wednesday, February 20, 2019 - link

    For me , anything over 500Gb is going to be used for mass storage, so HDD rulez. But ssd would be better on speed, noise and (possibly) reliability. I dont need ultra speeds, just something cheap enough, and faster than HDD. A long way off, still .
    Why couldn't ADATA offer two versions of the drive, or at least two firmwares, one for Boy racers, one for commercial use? if you can get a chandelier on your ram sticks ....well?
    Reply

Log in

Don't have an account? Sign up now