Meet The Cards: XFX & PowerColor

As there are no reference cards, for today's launch AMD sampled us the XFX Radeon RX 590 Fatboy. PowerColor also sampled us their RX 590 Red Devil. Both sport modest factory overclocks over the reference 1545MHz boost, and both feature dual BIOS with performance and quiet options. Broadly-speaking, if you're already familiar with PowerColor's Red Devil and XFX's GTS designs for Polaris, then you'll already know what these boards are like. 

Radeon RX 590 Series Cards
  XFX RX 590 Fatboy PowerColor RX 590 Red Devil Radeon RX 590 (Reference) Radeon RX 580
(Reference)
Boost Clock 1580MHz 1576MHz 1545MHz 1340MHz
Memory Clock 8Gbps 8Gbps 8Gbps 8Gbps
VRAM 8GB 8GB 8GB 8GB
TBP TBA TBA 225W 185W
Length 10.63" 10" N/A N/A
Width 2.5 Slot 2.5 Slot N/A N/A
Cooler Type Open Air Open Air N/A N/A
Price TBA ~$299? $279 $229

Both of the cards are relatively typical for custom factory overclocked designs, featuring thick heatsinks, dual axial fans, 1x8pin + 1x6pin for power, and the extremely essential presence of LEDs. Right now we don't have a definitive answer on price, but expect them to be in the high $200s to low $300s range where heavily factory-overclocked GTX 1060 6GB cards reside. For the opening launch window, all the partner cards are marked at the $279 SEP.

XFX Radeon RX 590 Fatboy

From the outside, the XFX Radeon RX 590 Fatboy looks to be much of the same with its existing RX 500 and 400 series models. The card's amusing namesake comes from the new heatsink design that XFX is calling the 'Fatboy Unibody VRM Heatsink,' and the company claims the design brings 50% greater heatsink surface area over previous RX 400/500 series cards. So it would seem it's an iteration on the Unibody VRM Heatsink introduced by RX RS and GTR series cards.

As silly as the 'Fatboy' name may be, it seems to have done its marketing job by raising interest, critical or otherwise, and for a subdued Polaris refresh SKU, that extra differentiation can be helpful.

And in terms of 'fatness', the RX 590 Fatboy has the 2.5 slot Double Dissapation style cooler, leading up to a height of 2.09". Thick, but perhaps not as thick as the Red Devil, which stands at 2.24". In any case, the card is neatly clad in an aluminum backplate. Right next to the PCIe power connections is the BIOS dip switch, toggling between Performance and Quiet/Lower RPM.

The display output situation is fairly standard for both cards, with 3 DisplayPorts, 1 HDMI, and 1 DL-DVI-D port.

PowerColor Red Devil Radeon RX 590

For the Red Devil RX 590, the thermal solution doesn't appear unchanged from the RX 580 version, sharing the same dimensions, 4x8mm + 1x6mm heatpipes, 6+1 power phases, and DrMos. At 10" long but 2.24" (57mm) high, the Red Devil RX 590 is a particuarly squat but thick card - just 3mm away from the standard triple-slot width. So prospective buyers should keep that in mind for smaller form factors, occupied neighboring PCIe slots, or chassis airflow management.

While the card has the red Red Devil LED, one of the more easily overlooked features is a small dip switch to disable LEDs. Both BIOS and LED switches are labelled so on the pentagram-emblazoned 1.5mm metal backplate.

Both the XFX Fatboy and PowerColor Red Devil have zero dB fan functionality as well, turning off the fans under certain temperatures and lighter workloads.

The Unlikely Legacy: AMD GFX8 Enters Its Fifth Year The Test
Comments Locked

136 Comments

View All Comments

  • AMD#1 - Tuesday, November 20, 2018 - link

    Well, they released a card this year for the consumer market. My hopes are that Navi will be a better option against NVIDIA RTX, good that Radeon will not support RT. Let NVIDIA first support DX12 with hardware shader units, instead of hanging on to DYING DX11.
  • silverblue - Wednesday, November 21, 2018 - link

    A couple of reviews seem to be showing the Fatboy at similar power consumption (or slightly higher) levels to the 580 Nitro+ (presumably the 1450MHz version) and Red Devil Golden Sample. That's not so bad when you factor in the significantly increased clocks, but the two 580s hardly sipped power to begin with, and basic 580s don't really perform much worse for what would be much lower power consumption. AMD has a product that kind of bridges the gap between the 1060 and the 1070, but uses more power than a 1080... hardly envious, really. The Fatboy has rather poor thermals as well if you don't ramp the fan speed up.

    The 590s we're getting are clocked aggressively on core but not on memory; what would really be interesting is a 590 clocked at 580 levels, even factory overclocked 580 levels. Would it be worth getting a 590 just to undervolt and underclock the core, make use of the extra game in the bundle (once they launch, that is), and essentially be running a more efficient 580? I'd be tempted to overclock the memory at the same time as that appears to be where the 580 is being held back, not core speed.
  • silverblue - Wednesday, November 21, 2018 - link

    I'll be fair to the Fatboy; it does have a zero RPM mode which would explain the thermals.
  • WaltC - Sunday, December 2, 2018 - link

    I just bought a Fatboy...to run in X-fire with my year-old 8GB RX-480 (1.305GHz stock)...! As I am now gaming at 3840x2160, it seemed a worthwhile alternative to dropping $500+ on a single GPU. Paid $297 @ NewEgg & got the 3-game bundle. I read one review by a guy who X-fired a 580 with a 480 without difficulty--and the performance scaled from 70%-90% better when X-Fire is supported. Wouldn't recommend buying two 590's at one time, of course, but for people who already own a 480/580, the X-Fire alternative is the most cost-effective route at present. Gaming sites seem to have forgotten about X-Fire these days, for some reason. Of course, the nVidia 1060 doesn't allow for SLI--so that might be one reason, I suppose. Still, it's kind of baffling as the X-Fire mode seems like such a no brainer. And for those titles that will not X-fire, I'll just run them all @ 1.6GHz on the 590...Until next year when AMD's next < $300 GPU launches...! Then, I may have to think again!
  • quadibloc - Friday, December 7, 2018 - link

    Oh, so Global Foundries does now have a 12 nm process? I'm glad they're doing something a little better than 14 nm at least.

Log in

Don't have an account? Sign up now