Intel Xeon E Six-Core Review: E-2186G, E-2176G, E-2146G, and E-2136 Tested

Test Bed and Setup

As per our processor testing policy, we take a premium category motherboard suitable for the socket, and equip the system with a suitable amount of memory running at the manufacturer's maximum supported frequency. This is also typically run at JEDEC subtimings where possible. It is noted that some users are not keen on this policy, stating that sometimes the maximum supported frequency is quite low, or faster memory is available at a similar price, or that the JEDEC speeds can be prohibitive for performance. While these comments make sense, ultimately very few users apply memory profiles (either XMP or other) as they require interaction with the BIOS, and most users will fall back on JEDEC supported speeds - this includes home users as well as industry who might want to shave off a cent or two from the cost or stay within the margins set by the manufacturer. Where possible, we will extend out testing to include faster memory modules either at the same time as the review or a later date.

Many thanks to...

We must thank the following companies for kindly providing hardware for our multiple test beds. Some of this hardware is not in this test bed specifically, but is used in other testing.

Hardware Providers
Sapphire RX 460 Nitro	MSI GTX 1080 Gaming X OC	Crucial MX200 + MX500 SSDs	Corsair AX860i + AX1200i PSUs
G.Skill RipjawsV, SniperX, FlareX	Crucial Ballistix DDR4	Silverstone Coolers	Silverstone Fans