ASRock Z390 Phantom Gaming 6

The ASRock Z390 Phantom Gaming 6 sits below the Phantom Gaming 9 and Taichi boards in the product stack and offers similar features and design aspects, but at a lower price point. The Phantom Gaming 6 remains ATX and has the same RGB capabilities as the Phantom Gaming 9 and users would be hard pressed to tell which is which if they didn't already know; the chipset heatsinks are a slightly different shape, the power and reset buttons are this time located at the top and the Gaming 6 has an extra PCIe 3.0 x1 slot. Speaking more of PCIe, the Gaming 6 has three full-length PCIe 3.0 slots all coated in ASRock Steel Slot reinforcement and the slots operate at x16, x8 and x4 respectively.

In regards to storage, the Z390 Phantom Gaming 6 has a total of eight SATA ports and has two M.2 slots which both allow for PCIe 3.0 x4 and SATA based drives to be installed. The board also has four RAM slots with support for up to DDR4-4266 and the capacity for up to a maximum capacity of up to 64 GB Unlike the Phantom Gaming 9 which has eight fan headers, the Phantom Gaming 6 has a reduced number with a total of five 4-pin headers available. Along the bottom of the board is an LED debug and ASRock advertises the board as having a 12-phase power delivery with an 8-pin and 4-pin 12 V ATX CPU set of power inputs which is mirrored from the Gaming 9; the board looks to be the same PCB, but with different componentry.

For the Z390 Phantom Gaming 6, ASRock has dropped one of the three LAN ports (Phantom Gaming 9) and equipped this board with two which consist of an Intel I211AT Gigabit and better grade Realtek RTL8125AG 2.5G LAN. The Phantom Gaming 6 also drops Wi-Fi support and some of the rear panel USB 3.1 Gen2 ports with a total of two composed of a Type-A and Type-C port; rounding off the USB is three USB 3.0 Type-A ports. A Realtek ALC1220 HD audio codec is included which offers five 3.5mm audio jacks and a single S/PDIF optical output and a trio of video outputs comprised of an HDMI, D-sub and DisplayPort.

The ASRock Z390 Phantom 6 has a recommended retail price of $200 which sets this as one of the most feature-rich in its price point, especially with dual LAN including a 2.5G port. The board does lack Wi-Fi connectivity but for users looking to drop some features and ultimately the price, but keeping much of the same componentry and quality features as the $270 Z390 Phantom Gaming 9, the $70 price reduction seems fair.

ASRock Z390 Phantom Gaming 9 ASRock Z390 Phantom Gaming 4
Comments Locked

79 Comments

View All Comments

  • DanTMWTMP - Thursday, October 11, 2018 - link

    Are they ALL made in China? What happened to the ones made in Taiwan from a few gens ago? :/
  • gavbon - Friday, October 12, 2018 - link

    Unfortunately, I cannot confirm this. The ASRock Z390 Taichi I have in my hands says 'designed in Taipei', but that's about it.
  • Nagorak - Sunday, October 14, 2018 - link

    Gigabyte apparently has a factory in Taiwan. It seems all the rest moved production to China.
  • WickedMONK3Y - Friday, October 12, 2018 - link

    The MEG Z390 Godlike looked like such an interesting board until I checked the MSI Specifications page and realised it actually does not have the PLX chip as suspected. The PCI Express slots on the board are configured as 16x / 4x / 8x / 4x instead of 16x / 16x / 8x / 4x or 16x / 8x / 16x / 4x. It seems after PLX sold to whomever owns them now, that the price hike stopped their usage on consumer boards completely.

    I really really hope somebody comes out with a board that has a PLX chip on board.
  • gavbon - Friday, October 12, 2018 - link

    The Supermicro C9Z390-PGW has a Broadcom 8747 PLX PCIe switch :)
  • ZioTom - Friday, October 12, 2018 - link

    It would be a nice touch including in next MB review what pheriferals stop funcioning when too much PCI-E lanes are used. Some motherboards disable SATA ports when M.2 slot are used; others may require limiting bandwith to one PCI-E slot... etc. Before byuing a motherboard I would like to be warned that is not possibile to use all the features they are advertising.
  • happyfirst - Friday, October 12, 2018 - link

    I wish we would get better thunderbolt support. Only one board has it built in? I'm thinking of a Taichi board and see a Thunberbolt AIC connector in the manual, but then I can't really find enough good quality posts of people having success putting it to use. I'd like to get a new external nvme ssd thunderbolt drive to run my vms off of so I can more easily take them on the road with me and use from my notebook.
  • ddcc - Saturday, October 13, 2018 - link

    Certain Gigabyte boards, e.g. Z390 Aorus Pro WiFi, seem to be using Intel's Z390 CNVi, but aren't listed in the article.
  • gavbon - Monday, October 15, 2018 - link

    I'm going to be updating tomorrow with more information; been working on getting one of the board reviews ready for the end of the week :)
  • gavbon - Sunday, October 21, 2018 - link

    Will be adding these in tomorrow (not at a PC currently) - We didn't have the information available prior to writing

Log in

Don't have an account? Sign up now