ASRock Z390 Extreme4

The ASRock Z390 Extreme4 hails from a long line Extreme4  branded boards which go as far back as Intel's Z77 chipset which was released back in 2012. Fast forward to now and the new Z390 Extreme4 has a semblance of the previous Z370 Extreme4 board but with some key differences. First of all the Z390 Extreme4 now includes an M.2 heatsink for the bottom slot and the rear panel cover has classier ASRock branding across it. The RGB LED lighting zones remain in the same places from the heatsinks and audio PCB cover and that's where the differences end; aside from specifications of course and the fact that this board has the newer Z390 chipset included. ASRock advertises a 12-phase power delivery and has included a pair of 12 V ATX CPU power inputs; an 8-pin and 4-pin. The board also has support for DDR4-4300 memory with up to 64 GB of capacity across four available RAM slots.

ASRock has kept the same PCIe slot layout as the Z370 Extreme4 with a total of three full-length PCIe 3.0 slots with the top two being treated to a coat of ASRocks Steel Slot protection; bandwidth wise they operate (from top to bottom) at x16, x8 and in x4. Also included are three PCIe 3.0 x1 slots and the board has support for up to two-way CrossFire and three-way SLI multi-graphics card configurations. The board has a total of four RAM slots with support for up to a maximum of 64 GB in total. Storage wise the Z390 Extreme4 has eight SATA ports with six coming from the chipset and another two from an ASMedia SATA controller with support for 0, 1, 5 and 10 RAID arrays. The two M.2 ports do feature support for both PCIe 3.0 x4 and SATA, but it's worth pointing out that these likely that these slots will share bandwidth with other ports.

On the rear panel is two USB 3.1 Gen2 with a Type-A and Type-C port included along with a further four USB 3.0 Type-A ports. In addition to a PS/2 combo port is a trio of video outputs consisting of a DisplayPort, HDMI and a D-Sub. The Z390 Extreme4 doesn't have any wireless networking capability but there is scope to purchase an E-key PCIe adapter and the rear panel includes a bracket for it. The single wired LAN port is powered by an Intel I219V Gigabit controller while the S/PDIF and five 3.5 mm audio jacks are impelled by a good quality Realtek ALC1220 HD audio codec.

Buy the ASRock Z390 Extreme4

The Extreme4 motherboards usually combine a good mixture of features, specifications and for the new iteration, the ASRock Z390 Extreme4 has a recommended launch price of $180 which is reasonable all things considered. The board has everything minus integrated Wi-Fi and is aimed more at enthusiasts than gamers; plenty of Phantom Gaming boards for those. There is the added wow factor of RGB built into the heatsinks and overall the design follows a much cleaner and neutral aesthetic than the new Phantom branded boards.

ASRock Z390 Pro4 & Z390M Pro4 ASRock Z390M ITX/ac
Comments Locked

79 Comments

View All Comments

  • DanTMWTMP - Thursday, October 11, 2018 - link

    Are they ALL made in China? What happened to the ones made in Taiwan from a few gens ago? :/
  • gavbon - Friday, October 12, 2018 - link

    Unfortunately, I cannot confirm this. The ASRock Z390 Taichi I have in my hands says 'designed in Taipei', but that's about it.
  • Nagorak - Sunday, October 14, 2018 - link

    Gigabyte apparently has a factory in Taiwan. It seems all the rest moved production to China.
  • WickedMONK3Y - Friday, October 12, 2018 - link

    The MEG Z390 Godlike looked like such an interesting board until I checked the MSI Specifications page and realised it actually does not have the PLX chip as suspected. The PCI Express slots on the board are configured as 16x / 4x / 8x / 4x instead of 16x / 16x / 8x / 4x or 16x / 8x / 16x / 4x. It seems after PLX sold to whomever owns them now, that the price hike stopped their usage on consumer boards completely.

    I really really hope somebody comes out with a board that has a PLX chip on board.
  • gavbon - Friday, October 12, 2018 - link

    The Supermicro C9Z390-PGW has a Broadcom 8747 PLX PCIe switch :)
  • ZioTom - Friday, October 12, 2018 - link

    It would be a nice touch including in next MB review what pheriferals stop funcioning when too much PCI-E lanes are used. Some motherboards disable SATA ports when M.2 slot are used; others may require limiting bandwith to one PCI-E slot... etc. Before byuing a motherboard I would like to be warned that is not possibile to use all the features they are advertising.
  • happyfirst - Friday, October 12, 2018 - link

    I wish we would get better thunderbolt support. Only one board has it built in? I'm thinking of a Taichi board and see a Thunberbolt AIC connector in the manual, but then I can't really find enough good quality posts of people having success putting it to use. I'd like to get a new external nvme ssd thunderbolt drive to run my vms off of so I can more easily take them on the road with me and use from my notebook.
  • ddcc - Saturday, October 13, 2018 - link

    Certain Gigabyte boards, e.g. Z390 Aorus Pro WiFi, seem to be using Intel's Z390 CNVi, but aren't listed in the article.
  • gavbon - Monday, October 15, 2018 - link

    I'm going to be updating tomorrow with more information; been working on getting one of the board reviews ready for the end of the week :)
  • gavbon - Sunday, October 21, 2018 - link

    Will be adding these in tomorrow (not at a PC currently) - We didn't have the information available prior to writing

Log in

Don't have an account? Sign up now