Today Samsung is launching a new generation of datacenter SSD models that are intended for small and medium businesses and will be sold through online retailers. Most of the new models are related to existing enterprise SSDs like the PM883 that have only been available to OEMs and the largest customers. The new models will be easier to acquire than the OEM models, and will not include any of the OEM-specific firmware customizations. Overall, this amounts to a major shift in Samsung's enterprise SSD strategy—away from being a pure OEM supplier and toward the OEM+channel model they use for client/consumer SSDs.

Samsung 860 DCT Specifications
Capacity 960 GB 1.92 TB 3.84 TB
Controller Samsung MJX
Form Factor 2.5" 7mm SATA
NAND Flash Samsung 64-layer 3D TLC
DRAM 1 GB LPDDR4 2 GB LPDDR4 4 GB LPDDR4
Sequential Read 550 MB/s
Sequential Write 520 MB/s
Random Read 98k IOPS
Random Write 19k IOPS
Power Consumption Read 1.9 W
Write 2.9 W
Idle 1.05 W
Write Endurance 349 TB
0.2 DWPD
698 TB
0.2 DWPD
1396 TB
0.2 DWPD
Warranty 5 years
Retail Price $269.99 (28¢/GB) $569.99 (30¢/GB) $899.99 (23¢/GB)

Starting at the bottom of the new product stack is the 860 DCT SATA SSD. This drive falls between a typical client/consumer drive and what is usually expected from an enterprise SSD. The 860 DCT 's hardware platform is based on the 860 EVO consumer SSD and thus lacks power loss protection, but the firmware is tuned for consistent sustained performance with no SLC write caching. The 860 DCT is intended for cost-sensitive use cases like content distribution networks (CDNs) that have very read-heavy workloads and do not require the extra data integrity guarantees provided by power loss protection. The 860 DCT uses 3D TLC NAND, but this product segment should be taken over by QLC NAND over the next year or two. The 860 DCT's write endurance rating is 0.2 drive writes per day (DWPD), comparable to entry-level client/consumer SSDs.

Samsung 883 DCT Specifications
Capacity 240 GB 480 GB 960 GB 1.92 TB 3.84 TB
Controller Samsung MJX
Form Factor 2.5" 7mm SATA
NAND Flash Samsung 64-layer 3D TLC
DRAM 512 MB LPDDR4 1 GB LPDDR4 2 GB LPDDR4 4 GB LPDDR4
Sequential Read 550 MB/s
Sequential Write 520 MB/s
Random Read 98k IOPS
Random Write 14k IOPS 24k IOPS 25k IOPS 25k IOPS 28k IOPS
Power Consumption Read 3.6 W
Write 2.3 W
Idle 1.3 W
Write Endurance 341 TB
0.8 DWPD
683 TB
0.8 DWPD
1366 TB
0.8 DWPD
2733 TB
0.8 DWPD
5466 TB
0.8 DWPD
Warranty 5 years

The higher-end SATA drive Samsung is introducing is the new 883 DCT, based on the PM883 introduced at the beginning of the year. This drive features power loss protection and a more typical write endurance rating of 0.8 DWPD. There's no MLC-based SATA SSD in the new product family, reflecting the shift to NVMe/PCIe interfaces for drives intended for write-heavy workloads.

Samsung 983 DCT Specifications
Capacity 960 GB 1.92 TB 960 GB 1.92 TB
Controller Samsung Phoenix
Form Factor 2.5" 7mm U.2 M.2 22110
Interface, Protocol PCIe 3.0 x4 NVMe 1.2b
NAND Flash Samsung 64-layer 3D TLC
DRAM 1.5 GB LPDDR4 3 GB LPDDR4 1.5 GB LPDDR4 3 GB LPDDR4
Sequential Read 3000 MB/s
Sequential Write 1050 MB/s 1900 MB/s 1100 MB/s 1400 MB/s
Random Read 400k IOPS 540k IOPS 400k IOPS 480k IOPS
Random Write 40k IOPS 50k IOPS 38k IOPS 42k IOPS
Power Consumption Read 8.7 W 7.6 W
Write 10.6 W 8.0 W
Idle 4.0 W 2,6 W
Write Endurance 1366 TB
0.8 DWPD
2733 TB
0.8 DWPD
1366 TB
0.8 DWPD
2733 TB
0.8 DWPD
Warranty 5 years

The mainstream NVMe product in the new family is the 983 DCT, based on the PM983's combination of TLC NAND and the Phoenix controller that also powers the 970 PRO and 970 EVO consumer SSDs. The 983 DCT features substantially higher performance than the 883 DCT SATA drive but comes with the same 0.8 DWPD write endurance rating. The 983 DCT will be available in the M.2 22110 form factor or as a 7mm-thick 2.5" U.2 with slightly higher performance thanks to the higher power and thermal limits of the larger form factor. The PM983 is also manufactured in Samsung's new NF1 form factor, but there are too few systems with NF1 slots to justify releasing a retail 983 DCT in that form factor at this time.

Samsung 983 ZET Specifications
Capacity 480 GB 960 GB
Controller Samsung Phoenix
Form Factor PCIe HHHL add-in card
Interface, Protocol PCIe 3.0 x4 NVMe 1.2b
NAND Flash Samsung 3D SLC Z-NAND
DRAM 1.5 GB LPDDR4
Sequential Read 3400 MB/s
Sequential Write 3000 MB/s
Random Read TBD
Random Write TBD
Write Endurance 7440 TB
8.5 DWPD
17520 TB
10 DWPD
Warranty 5 years

Lastly, the new 983 ZET finally brings Samsung's Z-SSD technology to a broader audience. The 983 ZET is features much higher write performance than the 983 DCT and is rated for up to 10 DWPD. This is still well shy of the 30 DWPD that the Z-SSD SZ985 offers or the 60 DWPD that Intel is now offering on the Optane SSD DC P4800X. Low latency is still a key selling point of Z-NAND, but Samsung has not yet provided final random I/O or latency specs for the 983 ZET. The 983 ZET will be available as a PCIe add-in card, though a future M.2 version based on the SZ983 would not be surprising.

The two SATA drives and the 983 DCT are already shipping and are starting to show up for sale through distributors like Amazon and CDW. The 983 ZET will be available on September 24th. We already have a review sample of the 860 DCT undergoing testing, and are expecting to review the 883 and 983 later this year.

Comments Locked

14 Comments

View All Comments

  • remosito - Wednesday, September 5, 2018 - link

    That is a weird-ass lineup. Nothing between 0.8 and 8.5 DWPD and the latter have super low capacity.....
  • abufrejoval - Friday, September 7, 2018 - link

    Well, it's logical on a physics level with MLC missing between SLC and TLC. Sometimes marketing cannot hide physics after all: Fine with me.
  • saiga6360 - Wednesday, September 5, 2018 - link

    Well, that's SLC vs TLC 3D NAND. SLC is the write endurance gold standard but at a higher cost and low capacities.
  • romrunning - Wednesday, September 5, 2018 - link

    I would like to see that 983 ZET in a U.2 form factor besides just an add-in card. I have a few servers that I would like to populate with those drives, and U.2 is more available now than the Ruler/EDSFF/NF1 form factors.

Log in

Don't have an account? Sign up now