MSI B450 Gaming Plus and
MSI B450M Gaming Plus

MSI has decided to go one step further than competing vendors launching a minimum of a dozen B450 boards, with a  mixture of gaming branded ATX, microATX and Mini-ITX offerings, as well as some more subtle looking models from their budget-friendly Arsenal range. First up is the B450 and B450M Gaming Plus models which aside from sharing similar aesthetics and feature set, the B450 Gaming Plus is full sized ATX, whereas the B450M Gaming Plus conforms to the slightly smaller microATX form factor.


MSI B450 Gaming Plus (left) and MSI B450M Gaming Plus (right)

The general theme of the MSI Gaming branding since the introduction back in 2013 has always been red and black, with both these Gaming branded models conforming to that theme. The heatsinks feature a black metallic sheen with red accents which has been carried over and has been printed onto the jet-black PCB. Neither the B450 or B450M Gaming Plus mentions RGB backlighting, but both boards have two 5050 RGB headers built in.

Starting with the ATX variant, the B450 Gaming Plus has two full-length PCIe slots with the top slot having a PCIe 3.0 x16 interface, and the bottom slot running at PCIe 2.0 x4. Also present is a total of four PCIe 2.0 x1 slots. The B450M Gaming Plus has a single full-length PCIe 3.0 x16 slot and is complemented by a pairing of PCIe 2.0 x1 slots. Both boards use MSI’s Steel Armor on the top full-length PCIe 3.0 x16 slot.

While both boards have support for DDR4-3466 right from the get-go, the B450 Gaming Plus has a total of four RAM slots giving a maximum supported capacity of 64 GB, whereas the B450M Gaming Plus has two slots allowing for a total capacity of up to 32 GB of system memory.


MSI B450 Gaming Plus (left) and MSI B450M Gaming Plus (right)

While both boards have a single M.2 slot, the ATX version supports PCIe 3.0 x4/SATA drives up to a maximum size of M.2 22110 (22 x 110 mm), and the microATX B450M Gaming Plus having room for up to M.2 2280 (22 x 80 mm); this is a side effect of having a smaller form factor. The full-sized version has a total of six SATA ports with four featuring right-angled connectors, with the other two sporting straight angled ports. The B450M has a total of four right-angled SATA 6 Gbps ports, with both boards offering the capability for RAID 0, 1 and 10 arrays.

Providing power to both the B450/B450M Gaming Plus is a 24-pin ATX power connector, while the CPU gets an 8-pin ATX 12 V input. From a quick glance the MSI B450M Gaming Plus looks like it has a 4+3 phase configuration, with the ATX sized model having a 4+2 power delivery. The B450 Gaming Plus has a heatsink covering the entirety of the power delivery, whereas the B450M’s heatsink covers the CPU area, leaving the SoC MOSFETs to be passively cooled by whatever method of system cooling is available.

The B450 Gaming Plus has a total of six 4-pin fan connectors with four being set aside for case fans, a single connector for the CPU fan and a dedicated header for water pumps. The B450M Gaming Plus has a three in total with two being dedicated to case fans and one specifically for the CPU fan. Both models have the capability to expand on USB ports, with the B450M Gaming Plus having a total of four internal headers which allows for an additional four USB 3.1 5 Gbps ports and four USB 2.0 ports. The ATX B450 Gaming Plus has the option to add an additional four USB 3.1 5 Gbps ports and two USB 2.0 ports through its internal headers.


MSI B450 Gaming Plus (top) and MSI B450M Gaming Plus (bottom) rear panels

The rear panels on both boards look strikingly similar with only a few minor differences. The B450 Gaming Plus has two USB 3.1 10 Gbps Type-A ports, with two USB 3.1 5 Gbps Type-A ports as well as two USB 2.0 ports; both models also feature a Clear CMOS button and a PS/2 keyboard and mouse combo port. The B450 Gaming Plus does have a slightly beefier audio with the six 3.5mm audio jacks being powered by a Realtek ALC892 audio codec, whereas the B450M makes do with three 3.5mm jacks controlled by a slightly lower grade Realtek ALC887 codec. The single LAN port on both boards is driven by the Realtek 8111H Gigabit LAN controller and both boards have support for the Ryzen and Vega APUs with HDMI and DVI-D outputs.

While MSI has limited pricing pre-launch, the B450 Gaming Plus looks to cost around $109.99 at launch which would represent relatively modest value for money. The B450M Gaming Plus should by rights come in at around $99.99, but once official pricing is confirmed on the smaller microATX model, we will update.

GIGABYTE B450M DS3H MSI B450 Gaming Pro Carbon AC
Comments Locked

62 Comments

View All Comments

  • theanalyzer - Tuesday, July 31, 2018 - link

    Signed up to point that out. Needs to be fixed. It’s the only ITX board supporting 2x which sets it’s apart form the competition
  • Death666Angel - Tuesday, July 31, 2018 - link

    Glad to see more options in the mATX range with two M.2 slots, not just from AsRock this time around. My next rig will either be based on the AsRock B450M Pro4 or one of the MSI B450M Mortar boards. Will wait for actual VRM setup and overclocking results / general tests to see which one will be it. I had motherboards from both manufacturers and was pleased with both. MSI has the advantage of offering PCIe M.2 options for both slots as well as SATA. One question regarding that: if I install a 3.0 PCIe x2 M.2 SSD into a 2.0 PCIe x4 slot, what will be the speed ramifications? Can it only use 2.0 PCIe x2 or can it use the full x4, thus being similar in speed to a native 3.0 PCIe x2 setup? :) Still waiting on mATX x470 mainboards.
  • Outlander_04 - Tuesday, July 31, 2018 - link

    .3.0 x 2 is the same speed as 2.0 x 4
  • DanNeely - Tuesday, July 31, 2018 - link

    Except that a 3.0 x2 drive is almost certainly x2 because it only has 2 PCIe lanes (cutting down on them is one of the ways the cheaper drives pinch pennies), which means it will be connected at 2.0 x2; at that point you might as well just use a SATA drive and save a bit more money.
  • Death666Angel - Tuesday, July 31, 2018 - link

    Thanks for providing an answer to my actual question. :)
  • AdrianB1 - Tuesday, July 31, 2018 - link

    You will get a 2 lane PCIe 2.0 connection, that means 1 GB/s. This is 1/4 of a PCIe 3.0 4-lane usual NVME drive, but real life you may get closer to 80% of the performance.
  • Death666Angel - Tuesday, July 31, 2018 - link

    Thanks!
  • Outlander_04 - Tuesday, July 31, 2018 - link

    Finally some budget boards with solid VRMs.
  • skpetic - Tuesday, July 31, 2018 - link

    There are some seriously shady stuff going on with VRMS om X470 og B450. Check out Buildzoid on youtube. Asus B450 STRIX ITX board is single phase for SoC. Several of the Gigabyte B450 and X470 boards in reality have half the advertised amount of phases or are using doublers:
    https://www.youtube.com/watch?v=3IjWCOXSuKU
  • meacupla - Tuesday, July 31, 2018 - link

    hahaha... no

    Asus with the absolute trash tier VRM heatsinks
    AsRock with fake phases
    Gigabyte with fake phases and trash VRM heatsinks
    MSI with no Vcore offset

Log in

Don't have an account? Sign up now