AnandTech Storage Bench - The Destroyer

The Destroyer is an extremely long test replicating the access patterns of very IO-intensive desktop usage. A detailed breakdown can be found in this article. Like real-world usage, the drives do get the occasional break that allows for some background garbage collection and flushing caches, but those idle times are limited to 25ms so that it doesn't take all week to run the test. These AnandTech Storage Bench (ATSB) tests do not involve running the actual applications that generated the workloads, so the scores are relatively insensitive to changes in CPU performance and RAM from our new testbed, but the jump to a newer version of Windows and the newer storage drivers can have an impact.

We quantify performance on this test by reporting the drive's average data throughput, the average latency of the I/O operations, and the total energy used by the drive over the course of the test.

ATSB - The Destroyer (Data Rate)

Starting off, the Phison E12 delivers a much higher average data rate on The Destroyer than their previous controllers, but it's not quite enough to match the top TLC-based drives on the market. Even the Plextor M9Pe with its aging Marvell 88SS1093 controller is a bit faster. On the other hand, the HP EX920 shows that Silicon Motion also has a lot of catching up to do with their next controller.

ATSB - The Destroyer (Average Latency)ATSB - The Destroyer (99th Percentile Latency)

Average and 99th percentile latencies from the Phison E12 are among the best we've seen from a TLC-based SSD. Premium drives using 3D MLC or Intel's Optane SSDs can be a bit better, but with even 99th percentile latency approaching 1ms for TLC drives, there's not much room left for meaningful improvement on these scores.

ATSB - The Destroyer (Average Read Latency)ATSB - The Destroyer (Average Write Latency)

The average read latency from the Phison E12 is similar to most other high-end SSDs, but the average write latency is better than any other TLC-based SSD.

ATSB - The Destroyer (99th Percentile Read Latency)ATSB - The Destroyer (99th Percentile Write Latency)

The Phison E12 turns in great scores for both 99th percentile read and write latency. The write latency particularly stands out, and it is clear that the E12 behaves well under pressure.

ATSB - The Destroyer (Power)

The Phison E12 uses far less energy on The Destroyer than the previous-generation E7-based Patriot Hellfire, and is a bit more efficient than the slower but lower-power E8-based Kingston A1000. The WD Black still holds a significant lead in power efficiency over all the other NVMe drives, but the E12 is making some progress toward that goal.

Introduction AnandTech Storage Bench - Heavy
Comments Locked

28 Comments

View All Comments

  • Tastydirt - Sunday, August 5, 2018 - link

    Not necessarily, depending on workload. A drive like this will read/write 4-8x faster than a SATA drive, allowing it to drop back into idle state much faster. This would probably result in lower total power consumption per byte read.
  • DanNeely - Wednesday, July 18, 2018 - link

    looks like a solid design to me, no bad results anywhere and optimizing for low latency over peak throughput in consumer scenarios is probably the better choice.
  • takeshi7 - Wednesday, July 18, 2018 - link

    I wish they kept the flip chip BGA design of the E7. It just looks cooler with the exposed die.
  • imaheadcase - Wednesday, July 18, 2018 - link

    Plan on admiring it inside case huh?
  • FATCamaro - Wednesday, July 18, 2018 - link

    He’s going to watch all those bits moving around the chip.
  • Alistair - Wednesday, July 18, 2018 - link

    A nice new possibility, but like the HP drive surprised me when I opened it, the Phison is double-sided unfortunately. I'd rather not buy Samsung, but Samsung being single-sided is a big plus.
  • imaheadcase - Wednesday, July 18, 2018 - link

    A big plus for what?
  • DanNeely - Wednesday, July 18, 2018 - link

    compatibility with laptops that don't have enough Z height for a 2 sided m.2 card.
  • romrunning - Thursday, July 19, 2018 - link

    It can also help with the cooling, if the controller is being impacted by higher thermals. The board-facing side may not have enough space to add even a small heatsink. Single-sided M.2 drives can benefit from placing the heatsink on the top side, along with whatever better airflow there may be the top side as well.
  • siuol11 - Wednesday, July 18, 2018 - link

    I really wish someone besides Samsung would make a "performance" drive with MLC, I'm not interested in using a TLC drive for a windows install. AFAIK there are no direct competitors to Samsung's Pro drives, and the prices have consequently continued to stay high.

Log in

Don't have an account? Sign up now