Seagate has pretty much always been a major player in the storage market, where they're known primarily for their hard drives. They haven't been completely absent from the SSD market, but they have focused almost exclusively on the enterprise SSD market. It has been quite a while since we've seen a consumer-oriented SSD from Seagate, but the new BarraCuda SATA SSD brings them back into play.

The BarraCuda SSD comes with minimal technical specs, but what we have so far points to a mainstream SATA drive that probably uses current-generation 64L 3D TLC NAND flash memory and a controller with the usual DRAM cache. The internals may offer a hint as to Seagate's plans for the consumer SSD market: if the BarraCuda is just a Silicon Motion reference design, then Seagate may not be very serious about competing in this market segment. If they've written their own firmware for a Silicon Motion or Marvell controller, then the BarraCuda is more likely to be an interesting competitor and less likely to be another one-off product.

Seagate BarraCuda SSD Specifications
Capacity 250 GB 500 GB 1 TB 2 TB
Model Number STGS250401 STGS500401 STGS1000401 STGS2000401
Controller unspecified
NAND Flash Toshiba 64-layer 3D TLC NAND
Form-Factor, Interface 6 Gbps SATA, 2.5"
Sequential Read up to 540 MB/s
Sequential Write up to 520 MB/s
Random Read IOPS up to 90k IOPS
Random Write IOPS unspecified
DRAM Buffer unspecified
Warranty 5 years
MTBF 1.8M hours
Write Endurance unspecified 1092 TB
0.3 DWPD
Price $74.99 (30¢/GB) $119.99 (24¢/GB) $229.99 (23¢/GB) TBA

Pricing appears to be only slightly higher than competitors like the Crucial MX500 or WD Blue, which is to be expected since Seagate doesn't have the benefit of manufacturing their own flash memory (though they are now a minority shareholder of Toshiba Memory). The five year warranty and 0.3 DWPD endurance rating are standard for mainstream consumer SATA SSDs.

Seagate is planning a limited release through Amazon Prime this month, followed by broad availability in September.

Source: Seagate

POST A COMMENT

21 Comments

View All Comments

  • Lolimaster - Thursday, July 05, 2018 - link

    The only way I see to lower price a bit is going for 1.8" form factor or the same 2.5" with less lenght. They could send more per container shipped. aluminum casing needs to stay. Reply

Log in

Don't have an account? Sign up now