nForce3-250Gb: 4-Drive SATA RAID and IDE RAID

Integrated RAID capabilities have become common with most of today's chipsets. Most competing chipsets provide the ability to use SATA RAID 0 (Striping) for Performance or RAID 1 (mirroring) for Data Protection. The nForce3-250 chipset takes these capabilities even further, however, with four drives instead of the two supported by other chipsets. These 4 drives can also be configured as RAID 0+1, which combines both striping and mirroring for speed and data protection.



RAID Level 0+1 Disk Striping and Mirroring


Cross-Controller RAID

The nVidia RAID solution is also unique in supporting both Serial ATA (SATA) and parallel ATA disk devices within a single RAID array. Users don't need to worry about whether hard drives are SATA or IDE - - the nVidia RAID controller treats both IDE and SATA drives the same and allows them to be combined in any way in the RAID controller. A single setup procedure applies to all drives, which makes it possible to use all the storage devices available. Users can also expand the number of drives easily without worrying about whether the drive is IDE or SATA.

On-the-Fly Rebuilds and Spare Disk Allocation

Corporate RAID users are accustomed to RAID arrays with "hot spares" and on-the fly rebuilds, but those RAID 5 features have been expensive additions to a home PC. The nVidia RAID controller adds both these features to a home PC that is running any type of mirroring. If a disk fails, RAID 1 allows continuous operation by taking advantage of the mirrored data copy in the array. The nVidia RAID solution goes a step further and lets a user rebuild a new mirrored copy for the data while the system is up and running, without disrupting user and application access to the data set. Rebuilding on the fly eliminates down time and maximizes protection for critical storage resources.

nVidia RAID 1 also lets users designate spare drives that can be configured as hot standbys, protecting arrays in the event of a disk failure. A shared spare can protect multiple arrays of drives, or a dedicated spare can serve as a hot standby for a particular drive array. The spare disk feature, which offers protection that goes beyond mirroring data, has traditionally been limited to high-end RAID systems. Truthfully, the RAID capabilities that nVidia has built into nForce3-250 will blow away almost any high-end home user. This isn't RAID 5 on a home PC, but the flexibility and data protection capabilities are truly impressive.

nForce3-250Gb: On-Chip Firewall Conclusion
Comments Locked

71 Comments

View All Comments

  • Curt Oien - Tuesday, March 23, 2004 - link

    PCI EXPRESS ?
  • prisoner881 - Tuesday, March 23, 2004 - link

    There's a huge gaffe on the On-Chip Gigabit page. It states that Fast Ethernet runs at "100MB/sec" and Gigabit runs at "1000MB/sec." "MB" is shorthand for mega<i>bytes</i>, not mega<i>bits</i>. Megabits should be abbreviated "Mb."

    Normally I wouldn't be this anally-retentive, but the poor usage leads to another problem later on down the page. The article states that Gigabit Ethernet running at "1000MB/sec" is faster than the PCI bus which runs at "133MB/sec." The PCI rate figure is correct, but the Gigabit figure makes it look like Gigabit is about 8 times faster than the PCI bus itself. <i>It's not!</i> The PCI bus runs at (133Mbytes/sec X 8 bits/byte = ) 1064Mbit/sec, which faster than Gigabit. The article is very misleading in this respect.

    In truth, the PCI bus can almost never reach its peak 133MB/sec rate (usually it's around 100MB/sec) but then again Gigabit can't reach it's peak either.

    Regardless, the article is completely incorrect when it indicates a Gigabit card would overwhelm a PCI bus. This is not true.
  • BikeDude - Tuesday, March 23, 2004 - link

    Argh... I keep forgetting that it's 1000Mbps _full duplex_... nVidia are indeed correct, the PCI bus is only half that speed. :-/

    --
    Rune
  • BikeDude - Tuesday, March 23, 2004 - link

    First off: GB is GigaByte. Wesley wrote "GB" more than once while actually referring to Gigabit (bit has lowercase b).

    Next, 1000Mbps is roughly 125MB/s (theoretical peak I expect). 33MHz 32-bit PCI is roughly 133MB/s. I dislike PCI Gb implementations as the next guy, but I'd still like to know how nVidia managed to come up with the half speed figure? Perhaps nVidia's PCI-bus implementation is sub-par? (which is a real issue! Via has struggled with really bad PCI performance for years :-( )

    Finally there's 6-channel audio; What happened with Soundstorm and Dolby encoding implemented in hardware? (I currently use only the SPDIF connectors on my nForce2 and get surround sound both in games and while playing DVDs -- is there no way to get this functionality with Athlon64?)

    Hopefully the next article will shed some light on some of these issues. Cheers! :)

    --
    Rune
  • KristopherKubicki - Tuesday, March 23, 2004 - link

    gigE is awesome and worth it. i dunno about the firewall but eh. 45MB/s network transfers are fun.

    Kristopher
  • Verdant - Tuesday, March 23, 2004 - link

    schweet... when is my 16x nforce 250 mobo comming the the mail?
  • klah - Tuesday, March 23, 2004 - link

    hmmm.. seems that last page was slipped in from the November SiS article. weird.

  • Phiro - Tuesday, March 23, 2004 - link

    yeah, the SiS 755FX plug at the end was sort of a red-herring - didn't fit at all with the article, which was soley about Nvidia, it didn't need SiS's recent efforts tacked on the end at the last second.

    A couple things:

    1) to all you nay-sayers about the worth of gigabit ethernet - I thumb my nose at you! Let's not play chicken or the egg games here, let's just usher in new *desired* technology as smoothly as possible - having gigabit ethernet will push me to replace my netgear 10/100 switched hub, not the other way around.

    2) Anandtech, what's with the nvidia ass kissing? When you say things like 'Nvidia assured us.." and "We did test Nvidia's claim... [and we believe it]" - come on, a little healthy doubt is a good thing. Just because they supplied you with a reference nforce3 250 mobo doesn't mean you have to see how far you can stick your tongue up their butt. Honestly, the article felt like it leaned toward Nvidia abit. Believe it or not, you can report on a product without it sounding like some money changes hands or something.
  • mechBgon - Tuesday, March 23, 2004 - link

    *drool*
  • bldkc - Tuesday, March 23, 2004 - link

    What's with the SiS 755 crap at the end of the article? Someone didn't proof read, huh? That is also obvious in the spelling errors. Excellent article. Better than recent ones. I do wish that you had been able to include the performance portion, cuz now I'm itching to see them.
    One thing tho, how many people have several gigabit systems at home? I know I will not upgrade any of mine until they are replaced, so it will be awhile. Therefore I am not too excited at this point, especially if the high speed wireless standards work out to high enough throughput to allow real time multi-media transfers. Love the on chip firewall, but Zonealarm is still the only useful application specific solution I know of. Not that I'm an expert, I am far from it, but the Blackice debacle was seen coming long ago.

Log in

Don't have an account? Sign up now