Shuttle XPC ST61G4: Noise Level

Most people choose the SFF systems for their small size, but they also want the almost contradictory quiet operation that comes with the best of the SFF computers. For that reason, we have been testing noise levels of all SFF systems in our recent reviews. With the new G4 chassis, Shuttle claims that they have reached new levels of quiet. Since Shuttle is famous for their quiet SFF systems, we were particularly interested in how the ST61G4 stacks up in quietness to recent SFF systems that we have reviewed.

Like our other SFF sound level tests, measurements of the Shuttle ST61G4 were taken with the unit on a desk. To be consistent with earlier data, Sound Level was measured on all 4 sides, in the center of the side, 4" from the chassis. Our Sound Level meter can measure as low as 35db, using either A or C weighting with Fast or Slow Dynamic Response. We use A weighting and Fast response because they are most comparable to how we actually experience sound as humans.

As we have done on other SFF tests, the ST61G4 was loaded just as a user would likely set up their SFF system. We installed a 3.0 P4, 1 GB DDR400 memory, a combo CD burner/DVD, and a 120GB Seagate Hard Drive. This is no provision for a floppy drive with the bootable flash reader. Since users will likely use the on-board 9100IGP, we did not use our ATI Radeon 9800 PRO video card in the system for sound level measurements. This is exactly the same setup used in all past SFF Noise Level measurements, except for the missing floppy drive. Since we have not operated the floppy drive during noise measurements, this should have no impact on our measurements.


The ST61G4 certainly matches Shuttle's claims. It is the new champion of quiet. The redesign of the ICE cooling system and the new Silent X power supply clearly work very well in keeping normal operation to very quiet levels. Compared to the earlier Shuttle design, the G4 chassis is 4 to 10db quieter. This means that the new features for quieter operation are working very well indeed. In fairness, once you get to average levels below 50db on the SFF systems we have tested, the system can be considered quiet and the noise will generally fade into background noise.

The otherwise silent ST61G4 does become very noisy when booting, however. We measured noise levels as high as 59db during early boot - until the smart fan controls kick in. This may be important to those who have their computers in bedrooms, since a boot up is pretty noisy. Keep the Shuttle on if you plan to use it while others are sleeping and you will find it as silent as you can get with any current SFF.

Shuttle XPC ST61G4: ATI 9100IGP Memory Performance Final Words
Comments Locked

17 Comments

View All Comments

  • Cygni - Sunday, January 25, 2004 - link

    The IGP performance was stellar... if your going to be using the onboard graphics, this box looks like a good choice... but if your going to be using the AGP slot, the i865G looks better.
  • sipc660 - Saturday, January 24, 2004 - link

    i think my laptop is running the same ati igp chipset and apart from the crappy celery i noticed performance could be somewhat better..but i don't think that the memory timings are forced that slow..
    could it be that the shuttle wanted to keep off any possible temperature issues?
    i noticed anything video and or memory intensive turns my rather quite laptop into a godzilla.

    i reckon anyone purchasing SFF should still get the shuttle and wait for a bios update....that should close the resulting performance gap

    why?

    ban the freakin 3andHalf floppy drives...
  • sipc660 - Saturday, January 24, 2004 - link

  • gamara - Saturday, January 24, 2004 - link

    The onboard nForce2 was tested in a previous review, and had better onboard video performance with a processor that cost $80(Athlon XP 2600+) instead of $260(P4 3.0). Not sure if the settings were the same, as the previous article did not list what settings it was tested with.
    ATI 98 FPS Q3, 50 UT 2003 Flyby, and 38 UT Bot
    NForce2 129 Q3, 66 UT Flyby, and 38 UT Bot. Not bad for giving up 1 Ghz on the processor.
  • artifex - Friday, January 23, 2004 - link

    this may sound stupid, but how do you install Windows to the onboard RAID without a floppy for the RAID driver? Not to mention... where does the other drive in the RAID go? :)
  • Lonyo - Friday, January 23, 2004 - link

    ATi - Pentium 4, Intel - Pentium 4. nVidia - AMD.
  • Rako00 - Friday, January 23, 2004 - link

    Why compare the ATI to intels intergreated graphics card only. At least include the Nforce 2 graphic card too.

Log in

Don't have an account? Sign up now