Today I would say that there’s only two truly vertically integrated mobile OEMs who have full control over their silicon: Apple and Huawei – and of the two one could say Huawei is currently even more integrated due to in-house modem development. Huawei’s semiconductor division, HiSilicon, has over the last several years been the one company which seems to have managed what the others haven’t: break in into the high-end market with solutions that are competitive with the current leader in the business, Qualcomm.

I remember the Honor 6 with the newly branded (Previously not having any “halo” line-up name) Kirin 920 SoC as the first device with the company’s in-house SoC that we reviewed. These and the following generation the Kirin 930 suffered from immaturity with problems such as a very power hungry memory controller and very disappointing camera processing pipeline (ISP/DSP). The Kirin 950 was in my opinion a turning point for HiSilicon as the product truly impressed and improved the quality of the product, catching many eyes in the semiconductor industry, including myself in the resulting review of the Huawei Mate 8.

Over the last several years we’ve seen great amounts of consolidation in the mobile semiconductor industry. Companies such as Texas Instruments which were once key players no longer offer mobile SoC products in their catalogue. We’ve seen companies such as Nvidia try and repeatedly fail at carving out meaningful market-share. MediaTek has tried providing higher end SoCs with the Helio X line-up with rather little success to the point that the company has put on hold development in that segment to rather focus on higher margin parts in the P-series.

Meanwhile even Samsung LSI, while having a relatively good product with its flagship Exynos series, still has not managed to win over the trust of the conglomorate's own mobile division. Rather than using Exynos as an exclusive keystone component of the Galaxy series, Samsing has instead been dual-sourcing it along with Qualcomm’s Snapdragon SoCs. It’s therefore not hard to make the claim that producing competitive high-end SoCs and semiconductor components is a really hard business.

Last year’s Kirin 960 was a bit of a mixed bag: the SoC still delivered good improvements over the Kirin 950 however it was limited in terms of what it could achieve against competing flagship SoCs from Samsung and Qualcomm as they both had a process node advantage. Huawei's introduction of flagships with new generation of SoCs in the fourth quarter is more close to the release time-frame of Apple than the usual first quarter that we’ve come accustomed of Qualcomm and Samsung.

As such when pitting the Kirin versus Snapdragon and Exynos’s we’re looking at a product that’s more often than not late to the party in terms of introduction of new technologies such as process node and IP. The Kirin 970 fits this profile: as a 10nm Cortex-A73 generation-based SoC, it lagged behind Qualcomm and Samsung in terms of process node, yet being too early in its release to match up with ARM’s release schedule to be able to adopt DynamiQ and A75 and A55 based CPU cores for this cycle. That being said the Kirin 970 enjoys a few months with technical feature parity with the Snapdragon 835 and Exynos 8895 before we see new Snapdragon 845 and Exynos 9810 products later in the usual spring refresh cycle.

Nevertheless, the article today is a focus on the Kirin 970 and its improvements and also an opportunity to review the current state of SoCs powering Android devices. 

HiSilicon High-End Kirin SoC Lineup
SoC Kirin 970 Kirin 960 Kirin 950/955
CPU 4x A73 @ 2.36 GHz
4x A53 @ 1.84 GHz
4x A73 @ 2.36GHz
4x A53 @ 1.84GHz
4x A72 @ 2.30/2.52GHz
4x A53 @ 1.81GHz
GPU ARM Mali-G72MP12
746 MHz
ARM Mali-G71MP8
1037MHz
ARM Mali-T880MP4
900MHz
LPDDR4
Memory
4x 16-bit CH
LPDDR4 @ 1833 MHz
29.9GB/s
4x 16-bit CH
LPDDR4 @ 1866MHz
29.9GB/s
2x 32-bit
LPDDR4 @ 1333MHz 21.3GB/s
Interconnect ARM CCI ARM CCI-550 ARM CCI-400
Storage I/F UFS 2.1 UFS 2.1 eMMC 5.0
ISP/Camera Dual 14-bit ISP Dual 14-bit ISP
(Improved)
Dual 14-bit ISP
940MP/s
Encode/Decode 2160p60 Decode
2160p30 Encode
 
2160p30 HEVC & H.264
Decode & Encode

2160p60 HEVC
Decode
1080p H.264
Decode & Encode

2160p30 HEVC
Decode
Integrated Modem Kirin 970 Integrated LTE
(Category 18/13)

DL = 1200 Mbps
5x20MHz CA, 256-QAM

UL = 150 Mbps
2x20MHz CA, 64-QAM
Kirin 960 Integrated LTE
(Category 12/13)

DL = 600Mbps
4x20MHz CA, 64-QAM

UL = 150Mbps
2x20MHz CA, 64-QAM
Balong Integrated LTE
(Category 6)

DL = 300Mbps
2x20MHz CA, 64-QAM

UL = 50Mbps
1x20MHz CA, 16-QAM
Sensor Hub i7 i6 i5
NPU Yes No No
Mfc. Process TSMC 10nm TSMC 16nm FFC TSMC 16nm FF+

The Kirin 970, isn't a major IP overhaul as it continues to use the same central processing unit IP from ARM that was used in the Kirin 960. The new SoC even doesn't improve the frequency of the CPU clusters as we still see the same 2.36GHz for the A73 cores and 1.84GHz for the A53 cores. When ARM originally launched the A73 we had seen optimistic targets of up to 2.8GHz on TSMC 10nm, but we seem to have largely missed that target, a sign of ever increasing difficulty to scale frequency in mobile SoCs as the diminishing returns from process node updates become worse and worse.

The Kirin 970 does bring a major overhaul and change in the GPU configuration as we see the first implementation of ARM’s Mali G72 in a 12-cluster configuration, a 50% increase in core count over the Kirin 960’s G71-MP8 setup. The new GPU is running at a much reduced frequency of 746MHz versus the 1033MHz of the Kirin 960. In Matt Humrick’s review of the Kirin 960 we saw some disastrous peak average power figures of the Mali G71 outright exploding the thermal envelope of the Mate 9, so hopefully the architectural improvements of the new G72 alongside a wider and lower clocked configuration in conjunction with the new process node will bring significant improvements over its predecessor.

The new modem in the Kirin 970 now implements 3GPP LTE Release 13 and supports downlink speeds of up to 1200Mbps thanks to up to 5x20MHz carrier aggregation with 256-QAM, making the new Kirin modem feature equivalent to Qualcomm’s X20 modem that’ll be integrated in the Snapdragon 845.

The big story surrounding the Kirin 970 was the inclusion of a dedicated neural processing unit. The NPU, as HiSilicon decided to name it, is part of a new type and generation of specialised dedicated acceleration blocks with the aim of offloading “inferencing” of convolutional neural net (CNNs). Many will have heard buzzwords such as artificial intelligence surrounding the topic, but the correct term is machine learning or deep learning. The hardware acceleration blocks with various names from various companies do not actually do any deep learning, but rather are there to improve execution (inferencing) of neural network models while the training of the models will still remain something that will be done either in the cloud or by other blocks in the SoC such as the GPU. It’s still the early days but we’ll have a proper look at the NPU in its dedicated section of the article.


SoC die shot image & labels courtesy of TechInsights Mate 10 teardown

As aforementioned one of the bigger improvements of the Kirin 970 is the switch to a TSMC 10FF manufacturing node. While 10nm is supposed to be a long-lived node for Samsung's foundry – where indeed we’ll see two full generations of SoCs produced on 10LPE and 10LPP – TSMC is taking a different approach and sees its own 10FF process node a short-lived node and stepping-stone to the much anticipated 7FF node, which is to be introduced later in 2018. As such the only TSMC 10FF mobile products to date have been the low-volume MediaTek X30 and Apple 10X in summer and the high-volume Apple A11 and HiSilicon Kirin 970 in Q3-Q4, a 2-3 quarter after Samsung had entered high-volume production of the Snapdragon 835 and Exynos 8895.

HiSilicon’s expectations of the new process node are rather conservative improvement of only 20% in efficiency at the same performance point for the apples-to-apples CPU clusters, below ARM’s earlier predictions of 30%. This rather meagre improvement in power will be likely one of the reasons why HiSilicon decided not to increase the CPU clocks on the Kirin 970, instead focusing on bringing down power usage and lowering the TDP when compared to the Kirin 960.

The SoC does enjoy a healthy die size shrink from 117.72mm² down to 96.72mm² even though the new SoC has 50% more GPU cores as well as new IP blocks such as the NPU. Our colleagues at TechInsights have published a detailed per-block size comparison between the Kirin 960 and Kirin 970 and we see a 30-38% decrease in block size for apples-to-apples IP. The Cortex-A73 quad-core cluster now comes in at only 5.66mm², a metric to keep in mind and in stark contrast to Apple which is investing twice as much silicon area in its dual-core big CPU cluster.

SPEC2006 - A Reintroduction For Mobile
POST A COMMENT

116 Comments

View All Comments

  • KarlKastor - Friday, January 26, 2018 - link

    Great, good news. Reply
  • KarlKastor - Thursday, January 25, 2018 - link

    What i would love to see, is a comparison to Imagination GPU IP. Is there a chance to run this parcour with an iPhone 7?
    Well, Apple GPU isn't unintereingt too. An iphone 8 would be great too. So one can see waht improvement they achieved with their own GPU.
    Reply
  • Andrei Frumusanu - Friday, January 26, 2018 - link

    Whilst I have all the new iPhones I can only post performance data as we cannot open up Apple review devices for power measurement. I have the intention to do this in the future once I get some new tools and a device I can dismantle. Reply
  • KarlKastor - Friday, January 26, 2018 - link

    I see. The others want a whole device for testing too. ;) Reply
  • levizx - Saturday, January 27, 2018 - link

    Great article, a few grammar mistakes here and there and a couple of factual mistakes such as "Kirin 970’s G71MP12".

    Is it possible to get a Meizu PRO 7 Plus with X30? It'll be interesting to see how PVR XT7P stack against G72.
    Reply
  • hescominsoon - Friday, February 02, 2018 - link

    There's a reason you do not see the exynos in the US. it is not because Samsung has not convinced it's own mobile division..it is legally bound to use QC here in the US:
    https://www.reddit.com/r/Android/comments/71rjyx/w... The author might want to do a google search on that next time. Otherwise good article.
    Reply

Log in

Don't have an account? Sign up now