Plextor has announced its next-generation high-end SSD, the M9Pe. The new drive will use Toshiba’s 64-layer 3D TLC NAND memory and a Marvell controller, and will be available in configurations of up to 1 TB. Plextor says that it is planning to bring the drive to market by the end of this year.

When it comes to high-end SSDs Plextor has returned to its yearly update cycle, and at this Computex the company announced the successor of the M8Pe drive it launched 12 months ago: the M9Pe. Lite-On, the company behind Plextor SSDs, continued to work with Marvell and Toshiba, who supplied controllers and NAND for the previous-generation drives. For Plextor it is logical to keep the old relationship, especially given the shortage of flash memory on the market.

For the Plextor M9Pe, the manufacturer has chosen the Marvell 88SS1093 BTB2 controller as well as Toshiba’s 512 Gb BiCS 3D TLC NAND memory. The 88SS1093 BTB2 controller is equipped with three cores and features 8 NAND channels with 4 CE per channel (32 targets in total). The IC supports a Marvell’s third-generation ECC technology based on the LDPC algorithm and uses PCIe 3.0 x4 interface. Essentially the chip is an updated version of the 88SS1093 with higher frequencies and performance, which makes a lot of sense for higher-end SSDs. It is still an NVMe 1.1 IC, so do not expect any features of the latest NVMe 1.3 spec. Meanwhile, Plextor promises stable performance in sustained use cases, and this is what matters most.

Plextor will offer its M9Pe drives in 256 GB, 512 GB and 1 TB configurations. As for performance, we are looking at up to 3100 MB/s sequential read speed and around 2300 MB/s sequential write speed for the higher-end models, but as the numbers are preliminary; commercial devices might perform differently than the engineering samples the company is testing now. As for form-factors, Plextor plans to offer both an M.2 form-factor card with a radiator, as well as add-in-cards with a larger cooling system featuring RGB LEDs.

Plextor intends to bring its M9Pe drives to market by the end of the year. Pricing is something that is hard to tell today because it will depend on multiple factors, including competitive environment, and of course, where NAND prices are later this year.

Source: Plextor

POST A COMMENT

41 Comments

View All Comments

  • Gasaraki88 - Thursday, June 08, 2017 - link

    "Couple of months back China announced the construction of a NAND mega-fab and all "analysts" were whining how "disruptive" that would be to the flash market"

    I didn't know that a NAND mega-fab just takes a couple of months to come online and start making MEGA NANDs.
    Reply
  • woggs - Friday, June 02, 2017 - link

    OMG you're an idiot. Factories MUST run at full capacity to make money. Reply
  • Reflex - Friday, June 02, 2017 - link

    Yay for unsupported assertions! Reply
  • nagi603 - Friday, June 02, 2017 - link

    Really depends on what your "most use cases" is. Full shutdown, restart, office and browser stuff? Sure. high-res video editing with multiple uncompressed streams? Not so much. For myself, I really wish my laptop with 16 gigs or ram would hybernate faster... and I wouldn't have to use RAM disk to speed up large scale database stuff. Reply
  • mischlep - Friday, June 02, 2017 - link

    Anandtech has consistently been reporting that there is a global NAND shortage, that's driving prices higher. The market is shifting to 3D NAND. That takes time. New broducts based on that 3D NAND. They're not out yet, but there's been a number of 3D NAND product announcements in the Anandtech pipeline. When these 3D products start hitting the market, I would expect to see some prices drop. Reply
  • CheapSushi - Tuesday, June 06, 2017 - link

    Wait for QLC. Reply
  • Gasaraki88 - Thursday, June 08, 2017 - link

    NAND shortage has cause prices to go up this past year and the shortage will last till the end of this year. Reply
  • mooninite - Friday, June 02, 2017 - link

    Why does everything need RGB LEDs in 2017? Who decided this? Reply
  • close - Friday, June 02, 2017 - link

    Maybe they ran out of idea to make many otherwise relatively boring product launches "interesting". "Now with RGB LEDs". Reply
  • melgross - Friday, June 02, 2017 - link

    Gamer influence. They need LEDs on every internal component, or they can't play. Reply

Log in

Don't have an account? Sign up now