For some intrepid enthusiasts, this is the chip from Intel we’ve been waiting for. I foolishly predicted that Intel would never create an overclockable Core i3, because it had the potential to drive sales away from high-margin products. But here we are, Core i3-7350K in hand, and the ability to drive almost 5.0 GHz without too much trouble. This raises a couple of questions: just how close is it to the cheapest Core i5-7400 out of the box, which is only a few dollars more, and how close is it to the Core i7-2600K, a favorite chip among enthusiasts who have not yet upgraded.

Slap Me On The Wrist

For the previous generation of Intel products, we reviewed the Core i3-6100TE. This was a low-powered Core i3, but it was paired with the SuperMicro C7H170-M, a motherboard that enabled adjustment of the base frequency from 100 MHz to 130 MHz and up. This was the first chance in a number of generations to test what would essentially be an overclockable Core i3 product. There were many teething issues, as overclocking via the base frequency is less stable than by the multiplier, plus the motherboard options were not the easiest to work with.

However the final conclusion was that the Core i3 parts, while having two cores and hyperthreading, have difficulty keeping up with the Core i5 in tasks where having actual cores matter. For gaming, especially 1080p or Full-HD gaming, there was a small difference in favor of the Core i5, and the indication that with DX12 enabling multi-core gaming in a nicer way before, a gap would likely emerge over time (but mainly for high-end games for now). As a result, we postulated that Intel would never release a Core i3-K product: doing so would potentially drive sales away from the i5-K, as here is a part that could perform just as well for $60-$70 less, which users would have in pocket to upgrade a graphics card instead.

Can Die Size Account for the Difference?

Intel, from the outside, seems very margin driven: keeping those numbers above 60-65% in every department seems to be key to progress. As a result certain projects come and go, and others with potential have a small grace period but the bottom line is performance and strategy. One could argue that potentially offering an easy route for users to migrate down from a Core i5-K to a Core i3-K could affect that bottom line: users are paying $60 less per unit, and that’s a $60 loss per sale. This is one way of looking at it – another is considering that the Core i3-K parts are dual-core by design, and cheaper to make.

Disclaimer: The data for 2+2/4+2 Kaby Lake and Skylake for the following analysis were derived from high quality images of each die, and thus subject to error. 

CPU Die Size Comparison
Numbers in table are to nearest degree of known accuracy
Data from Intel or Trusted Sources (Chipworks/PCWatch)
CPU Year Process
Node
Die Size
2C or 2+2
Die Size
4C or 4+2
Die Size
4+3/e
(no eDRAM)
Die Size
(other)
Intel Kaby Lake 2017 14+nm 98.68 126.15 -  
Intel Skylake 2015 14nm 98.57 122.40 234 -
Intel Broadwell 2014 14nm 82 *** 241.50 133 (2+3)
246.24 (10C)
306.18 (15C)
456.12 (24C)
Intel Haswell 2013 22nm 130 177 264 181 (2+3)
355.52 (8C)
492 (12C)
662 (18C)
Intel Ivy Bridge 2012 22nm 118.09 159.82 - 256.5 (6C)
341 (10C)
541 (15C)
Intel Sandy Bridge 2011 32nm 149 216 - 435 (8C)
Intel Westmere
(GPU on 45nm)
2009 32nm 81 (Core)
195* (+GPU)
276** - 248 (6C)
513 (10C)
Intel Nehalem 2008 45nm - 263 - 296 (HEDT)
684 (8C)
Intel Yorkfield 2007 45nm 107 220 - -
Intel Kentsfield 2007 65nm - 280 - -
Intel Conroe 2006 65nm 145 - - -

Italicised numbers are calculated from images and represent more of a 'peak' die size. Data taken from delidded images varied wildly, from 105mm2 to 130mm2 for the 4+2, so should be taken under caution.

* Dual Core Westmere CPUs had a IGP built on 45nm
** Quad Core Westmere designs with IGP didn't exist, so this is an estimate of what it would have been
*** Broadwell 4+2 designs don't seem to exist. The two mobile parts (we don't have access to) that fit this description are likely to be cut down 4+3e parts.

Taking data from available images on delidding the dual core parts and quad core parts, it’s clear that the new generation of Kaby Lake processors are physically smaller than Skylake. But the difference between the Core i5/i7 core design (known as 4+2) and the Core i3 design (known as 2+2) isn’t that much. With a die size of 126.15 mm2 for the quad core and 98.68 mm2 for the dual core, the die sizes of the two chips are relatively close, with a difference of just 27.47 mm2. This makes the dual core design 78% of the quad core size. If costs scaled linearly with die size, then die size difference between the two (22%) equates to $52.75 of the cost of the i5-7600K list price. This is similar to the list price difference between the two chips as a whole.

As we have this data for the first time, it is interesting to see that Intel’s new method of ‘Process-Architecture-Optimization’ rather than Tick-Tock, is yielding results. The Skylake 4+2 die size is similar from 122 mm2 to 126 mm2, and goes in line with the fact that Intel has officially stated that one of the key features of the new 14+ process is that the transistors are more ‘relaxed’ and there’s no decrease in density. Exactly what that means is likely under wraps for all but Intel (or Chipworks). But the difference between Kaby Lake 4+2 and 2+2 also means that we can get a rough number for the die area required for two cores.

In this case, two Kaby Lake cores plus L3 cache (plus periphery required for another two cores) are approximately 27.47 mm2. This makes the two cores in the dual core design approximately (given sufficient error margin) 27.8 % of the die. Doubling the die size for the four core version means that the CPU cores take up ~43% of the design. It's worth noting that using Intel's official die shot of the quad-core above puts the core area at around the 33-37% mark, depending on how you count the interconnect. The GPU area is almost identical (within 1%) of the core area as well. Our numbers here are calculated from delidded CPUs rather than official numbers, as Intel sporadically gives out such numbers these days (it depends which department is making the announcement, oddly) which makes our results more of an upper limit which is important to consider.

Because of the image above, we could arguably call the GT2 graphics inside the quad core design equal in size to the CPU cores (which seems plausable) at 54.94 mm2, then using the full dize size measurement above, it leaves 16.27 mm2 for the memory controller, system agent, and other requirements. If we do the math back into the dual core design with the same graphics core, we get 16.27 mm2 for the memory controller and other requirements as well.

Kaby Lake Comparison
CPU Die Size Cores Core Area GT2 Area IMC + other
Intel Kaby Lake-S 4+2 126.15 4 54.94 54.94 16.27
Intel Kaby Lake-S 2+2 98.68 2 27.47 54.94 16.27

For clarity, numbers in bold are measured; italics are estimates, and others are calculated.

So if the difference in die size can account for the price difference and won’t affect margins, what’s the bottom line here? Ultimately $60-70 per sale lost is a drop in revenue. However, it also depends on yields, and how the different CPUs are being binned. That information we won’t ever have. What we do know is that the Core i3-7350K is coming onto shelves at the end of January/beginning of February, rather than with the rest of the Kaby Lake CPUs in early January. So perhaps, ultimately, the effect of offering a Core i3-K in this case is minimal to Intel’s bottom line.

But Where Does the Core i3-7350K Fit In?

Intel's 7th Generation of Core CPUs, which often goes by its internal code name 'Kaby Lake', stretches from 91W on the mainstream desktop down to 4.5W for notebook processors, all using the same underlying technology in different core and integrated graphics configurations. The i7-7700K is the top part of this processor family, featuring four cores with hyperthreading, and we move down through the Core i5 and Core i3 parts. This time there are three overclocking processors, with the new one being the Core i3-7350K.

Intel Kaby Lake S SKUs
  Cores/
Threads
Base/
Turbo
IGP L3 eDRAM TDP Cost
OEM
i7-7700K 4/8 4.2/4.5 HD 630 8 MB - 91 W $339
i7-7700 4/8 3.6/4.2 HD 630 8 MB - 65 W $303
i7-7700T 4/8 2.9/3.8 HD 630 8 MB - 35 W $303
i5-7600K 4/4 3.8/4.2 HD 630 6 MB - 91 W $242
i5-7600 4/4 3.5/4.1 HD 630 6 MB - 65 W $213
i5-7600T 4/4 2.8/3.7 HD 630 6 MB - 35 W $213
i5-7500 4/4 3.4/3.8 HD 630 6 MB - 65 W $192
i5-7500T 4/4 2.7/3.3 HD 630 6 MB - 35 W $192
i5-7400 4/4 3.0/3.5 HD 630 6 MB - 65 W $182
i5-7400T 4/4 2.4/3.0 HD 630 6 MB - 35 W $182
i3-7350K 2/4 4.2 HD 630 4 MB - 60 W $168
i3-7320 2/4 4.1 HD 630 4 MB - 51 W $149
i3-7300 2/4 4.0 HD 630 4 MB - 51 W $138
i3-7300T 2/4 3.5 HD 630 4 MB - 35 W $138
i3-7100 2/4 3.9 HD 630 3 MB - 51 W $117
i3-7100T 2/4 3.4 HD 630 3 MB - 35 W $117
G4620 2/4 3.7 HD 630 3 MB - 51 W $86
G4600 2/4 3.6 HD 630 3 MB - 51 W $75
G4600T 2/4 3.0 HD 630 3 MB - 35 W $75
G4560 2/4 3.5 HD 610 3 MB - 54 W $64
G4560T 2/4 2.9 HD 610 3 MB - 35 W $64
G3950 2/2 3.0 HD 610 2 MB - 51 W $52
G3930 2/2 2.9 HD 610 2 MB - 51 W $42
G3930T 2/2 2.7 HD 610 2 MB - 35 W $42

The Core i3-7350K is the odd member of the stack. It sits as the only processor with a TDP of 60W, and is priced very close to the Core i5-7400/7400T. The comparison between this two (we were able to run limited tests on the i5-7400) will be a key aspect to this review given the pricing – will an extra $14 for two more cores offset the fact that the Core i3-7350K has a super high base frequency? Having 4.20 GHz as the frequency of the Core i3-7350K is interesting: as a Core i3, it has no turbo mode per-se, and it operates either in a low power mode (800 MHz or so) when idle or at full throttle when needed. This has some advantages over a turbo mode by having peak power being the only consideration, especially when combined with Windows 10 and using Intel’s Speed Shift technology to ramp up to the top speed quickly.

 
Intel Core i3-7350K vs Core i5-7400

Aside from the physical cores, the Core i3-7350K has less cache than the Core i5-7400, which is something to note.

One other pertinent comparison I want to make in this review is with the perennial favorite of DIY system builders for the last seven years or so: the Core i7-2600K. This is the high-end processor from the Sandy Bridge family that is known for being a good overclocker and a part which a lot of users are still on due to the lack of distinct performance improvements over the recent Intel microarchitectures. For most users still on these parts, the upgrade to a newer platform does not offer a substantial enough performance uptick to validate the outlay. However, at one point, there is going to be a Core i3 performance CPU that matches the Core i7-2600K. I want to find out if that time is now, or how far it might be away.

 
Intel Core i3-7350K vs Core i7-2600K (overclocked)

Kaby Lake i3 vs Sandy Bridge i7 Comparison
Launch Pricing
CPU Year Cores
Threads
Freq Turbo L3 IGP DRAM TDP Price
Core i3-7350K 2017 2/4 4.2 - 4MB HD 630 DDR4-2400 60W $168
Core i7-2600K 2011 4/8 3.4 3.8 8MB HD 3000 DDR3-1333 95W $317

In simple numbers, the Core i7-2600K has a base frequency of 3.40 GHz and has a turbo up to 3.8 GHz. The Core i3-7350K is at 4.2 GHz, giving it both a frequency advantage and 35%+ advantage in instructions per clock (IPC) by virtue of being so many generations ahead. Aside from the L3 cache difference, and the move from DDR3 to DDR4, is there a sufficient frequency and IPC increase for the Core i3 to match the golden processor of yesteryear? This review will solve that question.

More about Kaby Lake

For readers that want a more in-depth take on Kaby Lake as a platform, we have a dedicated article full of information for you. We also have other articles in our Kaby Lake bonanza. 

Other articles include:

Intel Launches 7th Generation Kaby Lake (Overview and Core Improvements)
The Intel Core i7-7700K Review: The New Out-of-the-box Performance Champion
The Intel Core i5-7600K Review: The More Amenable Mainstream Performer
The Intel Core i3-7350K Review: When a Core i3 Nearly Matches the Core i7-2600K (This Review)

Still to come

Calculating Generational IPC Changes from Sandy Bridge to Kaby Lake
Intel Core i7-7700K, i5-7600K and i3-7350K Overclocking: Hitting 5.0 GHz on AIR
Intel Launches 200-Series Chipset Breakdown: Z270, H270, B250, Q250, C232
Intel Z270 Motherboard Preview: A Quick Look at 80+ Motherboards
 

Kaby Lake, Intel's 7th Generation, Has New Features
POST A COMMENT

186 Comments

View All Comments

  • realneil - Wednesday, February 08, 2017 - link

    ^^This^^
    Intel is ~finally~ facing some upcoming opposition in the CPU arena and they're trying to fill in some perceived gaps in their CPU lineup.
    After Ryzen is released, expect to see multiple product changes from team blue right away to combat AMD's offerings.
    Reply
  • CaedenV - Friday, February 03, 2017 - link

    I think it will make more sense with next gen parts. I suspect we are watching a shift in the lineup that is slowly rolling out.
    celeron - duel core
    pentium - entry duel core with HT (limited cache/clock/iGPU)
    i3 - high-end duel core HT (essentially unchanged)
    i5 - quad core with HT (today's i7)
    i7 - 6-12 core with HT (today's LGA2011 line)

    So why no straight quad core part? Well, 2 reasons.
    1) it probably isn't needed. The original i5 parts were just i7s with broken HT cores that were disabled. I imagine most chips coming out now have perfectly fine HT cores, so they are artificially disabled. This increases the cost of the binning process, and reduces profit on a per-chip basis... especially if they can sell the same part somewhere between today's i5 and i7 price.
    2) Right now I would wager that most home builders buy either an i3 because they are budget conscious, or i7 because their pride will not let them get anything less than the best. But the i7 that they buy is the lower margin 'consumer' i7 chips rather than the premium laiden LGA2011 i7 chips that make buku bucks on both CPU and chipset sales. Moving the i7 lineup to start at ~$500 instead of ~$280 would more than off-set the number of people willing to step down to an i5 chip; even if the step down is in name only and really the i5 would be more affordable while offering traditionally i7 performance levels.
    3) Bonus reason; Ryzen chips are expected to land near today's i5/i7 chips in performance, and Intel does not want AMD to be able to say 'our chips are as fast as an i7 but only cost what an i5 does'. Instead, intel want's it's smug users (like myself) to say 'ya, that Ryzen is not a bad chip, but it doesn't hold a candle to my i7'. Real world benchmarks be damned, it is what people are going to say.
    Reply
  • Alexvrb - Friday, February 03, 2017 - link

    I wouldn't necessarily bet that more home users buy i7s than i5s. I personally know two gamers that recently built i5 systems because they wanted more oomph than a 2C/4T i3, but didn't want to spend money on an i7. Why? So they could spend more money where it makes the biggest difference... the graphics card. An i5 provides plenty of CPU horsepower for games, and gives you another $100 or so to spend on better graphics.

    I think their judgement was sound. I doubt they are alone in this kind of assessment. I think you're letting your admitted i7 smugness cloud your judgement a little bit.
    Reply
  • Tunnah - Saturday, February 04, 2017 - link

    I build PCs for my friends, and advise people on what to buy, and I don't know a single person apart from myself who has an i7 (and only know of 1 person who has an i3 but he uses his box for media). i5 is a perfect chip for casual users who use the PC mostly to game.

    Hell the only reason I have an i7 is for Civ VI ha.
    Reply
  • Alexvrb - Saturday, February 04, 2017 - link

    Bingo! Reply
  • Meteor2 - Sunday, February 05, 2017 - link

    i7s (or Xeons) are nice if you're encoding a lot of x265 video (x265 gives better quality per bitrate than hardware encoders). That's the only desktop use case I can think of. Reply
  • Meteor2 - Sunday, February 05, 2017 - link

    ...or apparently not, according to a comment way below, where a 12C/24T Xeon barely does double digit x265 FPS. Reply
  • bak0n - Monday, February 06, 2017 - link

    Exactly why I have an I5 3570k. My next build will either be a ryzen (depending on wither it hits expectations), or the I5 of whatever generation is out when I'm ready to buy. To big of a price jump to the I7 for a hard core 1080P maxed setting gamer, but not to much of a price jump over the i3's. That is, until now with the i3k which I may actually give a second look at. Reply
  • DiHydro - Monday, February 06, 2017 - link

    I fit into that category with one caveat, I also do some 3d modeling and rendering. This pushed me to the i7-2600k about four years ago, and I still don't feel that my CPU is the limiting factor on my PC. Reply
  • Byte - Saturday, February 04, 2017 - link

    Very true, most customers want the best or the cheapest. Changing the lineup liek that would make it easier. Reply

Log in

Don't have an account? Sign up now