Professional Performance: Windows

Agisoft Photoscan – 2D to 3D Image Manipulation: link

Agisoft Photoscan creates 3D models from 2D images, a process which is very computationally expensive. The algorithm is split into four distinct phases, and different phases of the model reconstruction require either fast memory, fast IPC, more cores, or even OpenCL compute devices to hand. Agisoft supplied us with a special version of the software to script the process, where we take 50 images of a stately home and convert it into a medium quality model. This benchmark typically takes around 15-20 minutes on a high end PC on the CPU alone, with GPUs reducing the time.

Here we report the overall time to complete the test – sub-test results can be found in Bench.

Agisoft PhotoScan Benchmark - Total Time

Here’s another instance where a stock Core i7-7700K can overcome an overclocked Devil’s Canyon. Agisoft spends a good time of its workload using cache heavy threads, showing that large core parts do really well, however the i7-7700K is on par with the six-core Core i7-3960X, showing that extra IPC and frequency can make up for a core or two.

Cinebench R15

Cinebench is a benchmark based around Cinema 4D, and is fairly well known among enthusiasts for stressing the CPU for a provided workload. Results are given as a score, where higher is better.

Cinebench R15 - Single Threaded

Cinebench R15 - Multi-Threaded

While Cinebench R15 is more a synthetic, it remains a popular test to measure professional performance and is free to use. For single threaded performance, the Core i7-7700K hits the top of the pile. With the Skylake and Kaby Lake parts both at 4.8 GHz, there’s almost nothing between them, showing the identical IPC. In multithreaded mode the 7700K is on top of all the mainstream processors as expected, and when overclocked can mix it up with some of the extreme processors as well.

HandBrake v0.9.9: link

For HandBrake, we take two videos (a 2h20 640x266 DVD rip and a 10min double UHD 3840x4320 animation short) and convert them to x264 format in an MP4 container.  Results are given in terms of the frames per second processed, and HandBrake uses as many threads as possible.

HandBrake v0.9.9 LQ Film

The LQ video emphasizes IPC due to its low cache overhead, meaning that the i7-7700K wins again, and when overclocked, performs the same as the 6700K at the same frequency.

HandBrake v0.9.9 2x4K

The higher resolution video however means that cores with frequency dominate. The i7-7700K stands above processors such as the i7-5820K, the i7-4930K and the i7-3960X, which is no small feat. But if you really want performance here, the big boys are still top performers (if you can afford them).

Hybrid x265

Hybrid is a new benchmark, where we take a 4K 1500 frame video and convert it into an x265 format without audio. Results are given in frames per second.

Hybrid x265, 4K Video

Our Hybrid test is somewhat similar to the HandBrake HQ test, showing the i7-7700K sitting tall as the mainstream champion.

Office and Web Performance Legacy Tests
Comments Locked

125 Comments

View All Comments

  • Ian Cutress - Wednesday, January 4, 2017 - link

    The boards will default to DDR4-2133 as a base memory frequency, regardless of processor. JEDEC has profiles for 2133 and 2400, and Kaby Lake is compatible with the JEDEC DDR4-2400 profile. So in order to achieve this, we use kits that offer DDR4-2400 JEDEC memory profiles via XMP. Enable XMP, and you're at the frequency that's officially supported by the processor, which is JEDEC. Out of the box usually refers to the BIOS, as we tend to eschew special 'media' BIOSes that might adjust certain performance parameters.
  • ccdrop - Tuesday, January 3, 2017 - link

    I just wanted to give you guys a super big THANK YOU! for testing under Windows 7 64-bit SP1, now I can be excited about the 7700k again!

    My big worry was that the 7700k was going to be a useless upgrade from my 2600K due to the whole "not officially support" drama as I flat have no interest in windows 10 (Please don't reply with Pro-10 comments I will never read them as I will never check these comments again I am just here to say thank you, along with the fact I have a laundry list about a mile long as to why I despise 10, I have thoroughly tested it for my use cases and it is a very solid downgrade. I am not a gamer so do it for the games is meaningless. As for security, my main workstation isn't attached to any networks and if you have local access to the system 10 is no better then 7, finally as for doing it for the "new features" just because you know new features are new... I will wait and see if the 7700k really runs 10~20% better on Windows 10 than windows 7 WITH MY SOFTWARE not games or things I don't use, then I'll switch. However as of now on my current hardware Windows 10 runs about 10~20% slower then windows 7 with my software, and is vastly more prone to errors and workflow interruptions.)
  • negusp - Thursday, January 5, 2017 - link

    stfu, it is a pretty useless upgrade. 10-20% over a 2600k is nothing to be excited about.

    wait for Ryzen or Cannonlake. if you think your 2600k is anywhere near obsolete you have to be kidding me.
  • fm13 - Thursday, January 5, 2017 - link

    I'm still using my i7 860 which is still OK at stock frequencies.
  • The_Assimilator - Tuesday, January 3, 2017 - link

    AnandTech reviews that are on time, what sorcery is this? I sincerely hope to see more of it this year!
  • just4U - Wednesday, January 4, 2017 - link

    I do not recall Ian ever being late to the party on his reviews...
  • Thatguy97 - Wednesday, January 4, 2017 - link

    Ryan is always late

    Remember Fiji? And the "on the way" gtx 950 review?
  • Toss3 - Tuesday, January 3, 2017 - link

    "In most of our benchmarks, the results are clear: a stock Core i7-7700K beat our overclocked Core i7-4790K in practically every CPU-based test (Our GPU tests showed little change)."

    Wait the 4790K was overclocked? You didn't mention the clockspeed anywhere. And how can a 5820K be faster than a 6800K (Grid: Autosport on MSI R9 290X)? You really need to let your readers know what speeds these CPUs are running at.
  • Thatguy97 - Tuesday, January 3, 2017 - link

    No fucking increase in IPC

    Damn we need some competition bad and shame on anandtech for not ragging on Intel for lack of innovation
  • ThomasS31 - Tuesday, January 3, 2017 - link

    Thanks... though it would be time to upgrade the GPU part to at least a GTX1080 or more like a TXP... I see on other tests, that those, especially the TXP shows some differences in high end gpus more. GTX980 is limiting these days too heavy.

Log in

Don't have an account? Sign up now