Seagate has formally introduced a new family of hard drives in the 2.5” form-factor. It is designed for laptops as well as external storage solutions. The new BarraCuda HDDs are based on 1 TB shingled magnetic recording platters and Seagate’s multi-tier caching technology. They enhance the maximum capacity of the company’s 2.5” HDDs to 5 TB - making the BarraCuda ST5000LM000 the world’s highest-capacity 2.5” hard drive.

The new Seagate BarraCuda 2.5” drives resemble the company’s Mobile HDDs introduced earlier this year and use a similar set of technologies: motors with 5400 RPM spindle speed, platters based on shingled magnetic recording technology with over 1300 Gb/in2 areal density, and multi-tier caching. The 3 TB, 4 TB and 5 TB BarraCuda 2.5” HDDs that come with a 15 mm z-height are designed for external storage solutions because virtually no laptop can accommodate drives of that thickness. Meanwhile, the 7 mm z-height drives (500 GB, 1 TB and 2 TB) are aimed at mainstream laptops and SFF desktops that need a lot of storage space.

All the new BarraCuda 2.5” HDDs feature 128 MB of DRAM cache as well as multi-tier caching (MTC) technology, which is designed to hide peculiarities of SMR. Hard drives featuring shingled recording write new magnetic tracks that overlap part of the previously written tracks. This may slow down the writing process since the architecture requires HDDs to rewrite adjacent tracks after any writing operation. To “conceal” such peculiarities, Seagate does a number of tricks. Firstly, it organizes SMR tracks into bands in a bid to limit the amount of overwriting. Secondly, the MTC technology uses several bands of PMR tracks on the platters, around 1 GB of NAND flash cache as well as DRAM cache. When workloads generate relatively small amount of writes, the HDD writes data to NAND and/or to the PMR tracks at a predictable data rate. Then, during light workloads or idle time, the HDD transfers written data from the caches to SMR tracks, as described by Mark Re (CTO of Seagate) earlier this year.

To a large extent, Seagate’s multi-tier cache determines the performance of the company’s BarraCuda 2.5" and Mobile HDD drives. For example, when Seagate announced its Mobile HDD products earlier this year, the company declared maximum sustainable transfer rate of the HDD at 100 MB/s. However, the documentation was altered later in the summer to reflect a maximum transfer rate of 140 MB/s (possibly due to updated firmware, or a change in the performance measurement method). Now, the high-capacity BarraCuda 2.5” (3 TB, 4 TB and 5 TB) drives are rated for 130 MB/s, while the mainstream BarraCuda 2.5” (500 GB, 1 TB and 2 TB) are rated for 140 MB/s. This is still below the 145 – 169 MB/s offered by PMR-based Laptop HDDs from the company.

Seagate BarraCuda 2.5" HDDs
  5 TB 4 TB 3 TB 2 TB 1 TB 500 GB
Platters/Heads 5/10 4/8 | 5/10* 3/6 2/4 1/2
Spindle Speed 5400 RPM
Cache 128 MB + multi-tier caching technology
Transfer Rate 140 MB/s
Avg Latency 5.6 ms
Areal Density 1307 Gb/in² avg 1320 Gb/in² avg
Recording Density 2254 Kb/in avg 2276 Kb/in avg
Track Density 580 Ktracks/inch avg
Idle Power 1.1 W 0.5 W 0.45 W
Read/Write Power 1.9/2.1 W 1.7/1.8 W 1.6/1.7 W
Interface SATA 6 Gbps
Form-Factor 2.5"/15 mm 2.5"/7 mm
Model Number ST5000LM000 ST4000LM024 ST3000LM024 ST2000LM015 ST1000LM048 ST500LM030
*While the vast majority of the Seagate BarraCuda 2.5" 4 TB HDDs will use a four-platter configuration, some Seagate customers have apparently requested a five-platter configuration. Obviously, being based on 800 GB platters, such drives have lower areal density and, perhaps, different performance and behavior.

Seagate’s new BarraCuda 2.5”/7 mm HDDs for laptops should hit notebooks in the coming weeks as the company is already shipping them to its customers. Seagate does not currently offer SED and FIPS options for its BarraCuda family (those who need encryption can still get Seagate's Mobile HDDs based on SMR technology). The company plans to add these technologies to the BarraCuda arsenal in the future.

The BarraCuda 2.5”/15 mm drives for external storage solutions will be used inside Seagate’s own DAS devices such as the Backup Plus Portable Drive and the Expansion Portable Hard Drive products. The Seagate Backup Plus Plus Portable Drive 5 TB (STDR5000100) is due in early November and will cost around $150 - $160. This device will be the world's highest-capacity portable DAS and will not immediately have direct rivals in this particular form-factor. At present, the maximum-capacity 2.5” HDD offered by Western Digital is 4 TB with a 12.5 mm z-height. It is used inside a number of My Passport drives.

All the BarraCuda 2.5” drives are backed by a two-year warranty.

 

Source: Seagate

POST A COMMENT

30 Comments

View All Comments

  • MrSpadge - Sunday, October 23, 2016 - link

    They're for cold storage only. And the warrenty.. feel free to buy enterprise drives with 5 years instead of 2 years for at least 3x the price. Reply
  • wumpus - Tuesday, October 25, 2016 - link

    There's certainly going to be plenty of spinning drives connected to NAS for awhile. Not everybody is willing to access their data only when the cloud is available. Of course, most NAS boxes are built for 3.5", and it depends how things are priced.

    I'd be curious to know if the market really prefers 2.5" for cold storage. The fact that you can drive a USB storage system without any additional power (I'm assuming, earlier drives worked) makes for great cold storage. Of course it still requires additional parts and a willingness to pay to backup your data.

    I wouldn't be at all surprised if more than a few >2T drives found there way into laptops that can take a standard 2.5" drive plus some other SSD. Then again, I'm guessing most people who think that way tend to prefer desktops.
    Reply
  • Reflex - Friday, October 21, 2016 - link

    I quite like the SMR drives Seagate is putting out. I wouldn't want them as a primary system drive, but I have 4x8TB SMR drives in a QNAP NAS in a RAID1 array. It was a cheap way to get 16TB of storage, and I'm using it for Plex where the write speed is basically irrelevant and it can read fast enough to saturate Ethernet already. Reply
  • npz - Friday, October 21, 2016 - link

    Are the 7mm 2TB ones with 128MB SMR too? Or is it only the 3TB and up?

    I have the Samsung based 9.5mm thick 2TB ones with 64MB. I assume that's non-shingled PMR?
    Reply
  • Wolfpup - Friday, October 21, 2016 - link

    I wish we'd get rid of both SMR and TLC drives. The last thing we need hard drives to be is even LESS reliable :-/ Reply
  • satai - Friday, October 21, 2016 - link

    Just buy lower capacity or more expensive drives... Reply
  • iwodo - Saturday, October 22, 2016 - link

    $150 for a 2.5" 5TB HDD? That is VERY attractive. I want a small NAS that fits two of these inside with 1 Drive as Failover. Reply
  • karakarga - Monday, October 24, 2016 - link

    Why there isn't a 9mm height drive? It passes 7mm to 15mm after 2TB to 3TB. 3TB drive might surely be 9mm, so it can be fitted on a standart notebook. Still the internally fittable size is 2TB remained! No developmet at capacity.... Reply
  • anarky321 - Wednesday, October 26, 2016 - link

    is there any difference between the ST2000LM015 and the ST2000LM007 ? i just bought the ST2000LM007 because it was $20 cheaper but looking at the specs i see no differences Reply
  • Tedaz - Friday, April 07, 2017 - link

    The current product manual still shown this 2.5 inch 5TB hard drive using 'Perpendicular recording technology', when does the Seagate will update/correct the manual? Reply

Log in

Don't have an account? Sign up now