Office Performance at 3 GHz

All of our benchmark results can also be found in our benchmark engine, Bench.

Agisoft Photoscan – 2D to 3D Image Manipulation: link

Agisoft Photoscan creates 3D models from 2D images, a process which is very computationally expensive. The algorithm is split into four distinct phases, and different phases of the model reconstruction require either fast memory, fast IPC, more cores, or even OpenCL compute devices to hand. Agisoft supplied us with a special version of the software to script the process, where we take 50 images of a stately home and convert it into a medium quality model. This benchmark typically takes around 15-20 minutes on a high end PC on the CPU alone, with GPUs reducing the time.

Agisoft PhotoScan Benchmark - Total Time

Looking at the subtests for Photoscan, Carrizo's biggest hiccup was in the first stage which loads images into memory and attempts to identify and compare similar points in the photograph and its location relative to the object. This requires a significant amount of memory management, and Carrizo loses 17% in the first stage to Kaveri. Stage 4 gets a bump with Carrizo over Kaveri, enough to bring it back over Trinity and Richland, but overall the Carrizo part is still 6% down.

Cinebench R15

Cinebench is a benchmark based around Cinema 4D, and is fairly well known among enthusiasts for stressing the CPU for a provided workload. Results are given as a score, where higher is better.

Cinebench R15 - Single Threaded

Cinebench R15 - Multi-Threaded

Similar to Dolphin and 3DPMv2, Carrizo's microarchitectural changes help with CineBench 15 as well. Kaveri appearing on the same level as Trinity/Richland for single threaded is as expected, with the better multithreading handling coming through in the second test.

HandBrake v0.9.9: link

For HandBrake, we take two videos (a 2h20 640x266 DVD rip and a 10min double UHD 3840x4320 animation short) and convert them to x264 format in an MP4 container.  Results are given in terms of the frames per second processed, and HandBrake uses as many threads as possible.

HandBrake v0.9.9 LQ Film

HandBrake v0.9.9 2x4K

Typically we expect something like video conversion to be memory intensive, especially with codec decone/encode, however the base microarchitecture gives Carrizo an 8% lead and a 9% lead over Kaveri in our low quality and double UHD tests.

Hybrid x265

Hybrid is a new benchmark, where we take a 4K 1500 frame video and convert it into an x265 format without audio. Results are given in frames per second.

Hybrid x265, 4K Video

However, with x265. both Kaveri and Carrizo perform similarly.

Performance at 3 GHz: Real World Performance at 3 GHz: Linux
Comments Locked

131 Comments

View All Comments

  • Peichen - Thursday, July 14, 2016 - link

    I stopped reading at the messy chart where Athlon X4 750 is available from 2 µArch and there is no science to naming. AMD's CPU division was a bigger failure than its GPU division and it still it. I used to have 3 AMD systems at the same time back in 2005 but have steadily moved away and was considering replacing the last AMD system (Phenom II 840) using Prime Day sales.
  • Ian Cutress - Thursday, July 14, 2016 - link

    The 750 and 750K are two different SKUs. As mentioned, trying to find the 750 at retail (and in stock) is *really difficult*, and I'd probably point to it being an OEM-only SKU for a certain design. If anyone has a 750/can find one, let me know.
  • artk2219 - Wednesday, July 20, 2016 - link

    I found a link for one, but I think its just an OEM one, and it's from Aliexpress, so it may take a while to get to you. I hope I could help!

    http://www.aliexpress.com/item/AMD-Athlon-X4-750-A...

    http://www.cpu-world.com/CPUs/Bulldozer/AMD-Athlon...
  • jefeweiss - Thursday, July 14, 2016 - link

    I don't think poignant is the word you are looking for here. That would be something that makes you very sad, or emotionally touches you deeply.
  • wallysb01 - Thursday, July 14, 2016 - link

    I guess I don't totally understand the comparison to the G3258. I know its a fairly popular processor (I have its non-overclockable little brother, the G3250, and love it in a simple home office set up that I use occasionally for light gaming too). However, its 2 years old. Where is the G4500 or G4520? Supposedly the skylake Pentium would be about 10% faster than haswell, no? And with some perf/W gains too?

    Speaking of which, where's the comparison to Intel in the power consumption? Do I just not want to see that? If in these multithreaded tasks the 845 is chugging along using 80-85 W, while the Intel parts are still near their stated TDP, it more or less invalidates the small performance gain of the AMD chip in those tasks. Looking back at the skylake review, it seems at load the Intel chips might be using anything from 0-20% more than their TDP, this AMD chip is going 30% above.

    I'd love it if AMD could push intel into offering more cores at lower price points, but this doesn't seem good enough to do that....
  • stardude82 - Thursday, July 14, 2016 - link

    Tacking on a G4500 is not terribly pertinent to the task at hand and they are just using archived results here. The comparison from the 2 i3 parts should give you an idea of relative performance. Otherwise, I'm surprised we get such an in depth review from an hollowed out Anandtech.

    You are confusing TDP with total system draw.

    You have a "four core" CPU here for $70, what more do you want? They soundly thrash the dual-core Pentiums and i3s in some well parallelized applications. The problem is the world isn't well parallelized and the CPUs don't have 4 real cores which is why you have i3s still competitive 8 core FX chips.
  • yannigr2 - Thursday, July 14, 2016 - link

    WOW. This is an amazing work. It does explain too much about AMD's Bulldozer versions. It does explain why AMD doesn't bother to bring the full Carrizo line in desktop. It does show, at least from my perspective, that Bulldozer architecture was not a bad architecture to begin with, but a dead end from the beginning.
  • artk2219 - Thursday, July 14, 2016 - link

    Sigh, poor Llano and your FM1 package, always forgotten. Granted it was the last of the stars cores, and not a bulldozer derivative, but it would still be nice to see it included with its brethren.
  • TheinsanegamerN - Thursday, July 14, 2016 - link

    The last of AMD's good cores. Mobile Llano was fantastic for OCing and undervolting.
  • artk2219 - Thursday, July 14, 2016 - link

    Indeed it was/is, my fiance is still using my old Asus K53TA. I overclocked the A6 (back when A6's came with 4 cores) in that laptop to run at 2.4 instead of 1.4 for the base, and the turbo to 3Ghz. while overclocking i was able to undervolt at base clocks, and slightly overvolt the turbo clocks. In effect I got better battery life and waaayyyy better performance by just spending a little time playing with the P-States. I still think thats one of the best laptops I've ever owned in terms of reliability and capability, if only it weren't so clunky. Sigh, well you cant have it all.

    http://www.newegg.com/Product/Product.aspx?Item=N8...

Log in

Don't have an account? Sign up now