Earlier this week, Samsung announced a number of updates on the foundry side of their business. While process technology might not be necessarily as interesting as the actual end product from a consumer perspective, it can often give us a good idea for what to expect in terms of performance and power from future products. Of course, it’s up to the various fabless chip design companies around the world to actually exploit the full potential of a process, but in general power and performance are often gated by process node. Almost everything in computing revolves around supporting abstractions, which inevitably means overhead to support these abstractions, so progress at the foundry level is critical for moving the industry forward as a whole.

The first, and probably most important announcements are related to process roadmap. The most important point that Samsung made here was that they fully intend to deploy extreme UV (EUV) in mass production for their 7nm processes, which is a pretty significant claim to make as even imec was reluctant to say that EUV would be happening at 7nm. However, those at Samsung seem to believe that this is necessary because otherwise the first metal interconnect layer would require triple patterning, and the transistors themselves would likely be facing similar multiple patterning requirements.

While we’ve discussed EUV before and the challenges that it faces, Samsung believes that triple patterning is not really a viable solution because the number of masks needed goes from roughly 60 or so with double patterning to 90 or so with triple patterning, which results in a steep increase in costs and long lead times for prototypes and production ramp as the masks are made with e-beam lithography for precision, so mispredict penalty for a design isn’t nearly as severe as it would be with a 7nm 193i-only process. Of course, EUV is only going to be used in critical layers, so 193i will still be used for the majority of the layers in the chip, but even so EUV will still be a major hurdle for Samsung to clear here as EUV sources still don’t have enough power to be viable for mass production. Interestingly, Samsung claims that they have mask inspection tools internally for EUV masks, which could help them get to deploying EUV sooner in mass production.

On 10nm, things are less murky as it’s pretty clear that this process will be able to mostly be scaling of the 14nm node to improve performance and possibly improve cost, so the primary update here is that 10LPP (Low Power Plus) will be following 10LPE (Low Power Early) for a 10% improvement in performance. A design done in 10LPE can be directly ported to 10LPP with no new design work.

At 14nm, Samsung seems to be doing well here as their fabs in Korea and Texas are running full time, with over 0.5M wafers shipped and defect density below 0.2 defects/cm^2 in production. This defect density is said to be highly competitive, but I’m not really qualified to say whether this is the case. The primary update of note at 14nm is that 14LPC will have an RF option by the end of the year to enable connectivity for applications like automotive and transceivers.

On the process side, 28nm is still pretty critical for a number of applications as this is the last process where planar is viable. Even if 20nm is technically the last planar process, it’s not all that attractive compared to 28nm due to cost, DIBL leakage, and sheer heat density. Samsung’s 28FDS process has been in mass production for some time now as a higher-end node designed to provide ~20nm FinFET class performance on 28nm, but the main news of note here is that 28FDS will have an RF process which adds elements like inductors and is properly characterized to allow for high speed electronics to work properly. 28FDS will also have embedded non-volatile flash memory to enable embedded applications where some memory is needed as a ROM. Kelvin Low of Samsung noted that FD-SOI is also notable for reducing soft error rate relative to bulk CMOS which reduces the need for design-level mitigations, although this was mostly in the context of safety-critical systems that could be seen in automotive and other segments.

On the design and packaging services side, Samsung is providing more here than before in the form of reference design flows for their 14nm process, and a similar flow will be available for 10nm. Packaging services that used to be for internal use only will also be opened up, with things like 2.5D interposers to enable HBM on GPUs and similar use cases, although it was noted that in that particular case the interposer is currently a bit too expensive for use outside of high-priced components like GPUs. Samsung is also providing some IP blocks for customers to speed up time to market for things like DDR4 and PCI-E controllers.

Overall, Samsung is seems to be quite aggressive on the foundry side and it’ll be interesting to see whether this pays off. Of course, there are the inevitable questions of whether this is comparable to Intel or TSMC’s process, but for now we can’t really say absent details about the pitches of the key layers, operating voltages, and other aspects that we need to consider in order to really compare process nodes. We saw how Samsung’s 14nm push paid off, so it’ll be interesting to see how things shake out with 7nm.

Source: Samsung

POST A COMMENT

54 Comments

View All Comments

  • vladx - Saturday, April 23, 2016 - link

    Samsung would have no interest in x86 tech, Apple on the other hand will keep selling Macs for years to go so they definitely wouldn't want to be at the hands of Intel. Reply
  • Michael Bay - Friday, April 22, 2016 - link

    >IBM
    >litographic tech
    >Samsung
    >ahead of Intel
    >guaranteed at that

    IBM is nothing but a overmanaged slaughterhouse for its employees, trying to turn into outright patent troll. And Samsung always promises and never delivers.
    I guess they make a good match.
    Reply
  • jospoortvliet - Friday, April 22, 2016 - link

    Samsung's been promising and (not) delivering a load of products... Mobile phones, memory, SSD's, heck my Microwave is Samsung ;-) Reply
  • Anymoore - Friday, April 22, 2016 - link

    The triple patterning argument doesn't fly with me because they're using it for 10nm M1 layer. Reply
  • ingwe - Friday, April 22, 2016 - link

    Hmm...my guess would be based on the fact that E-beam lithography takes twice as long (at minimum) to make a mask at 7 nm compared to 10 nm. So either double the time or double the cost compared to 10 nm and something has to give. Reply
  • Anymoore - Friday, April 22, 2016 - link

    The mask for EUV would take exponentially longer since the features are actually smaller. Reply
  • Anymoore - Friday, April 22, 2016 - link

    http://www.prnewswire.com/news-releases/mentor-gra...

    "The Olympus-SoC place and route platform is also certified for use at 10nm, with a comprehensive colored design methodology covering floorplanning, placement, extraction, routing and chip finishing requirements. To address the particular challenges of FinFET manufacturing, the platform supports M1 triple patterning, color shifting, non-uniform tracks, mask- and width-dependent spacing rules, and other new capabilities. Active deployment is underway at multiple mutual customers."

    Triple patterning already qualified for Samsung 10nm M1.
    Reply
  • jjj - Friday, April 22, 2016 - link

    Where are they saying they'll use EUV? If anything they are saying that they won't. We are reviewing...... means yeah sure maybe at some point if it is ready and that's pretty much a no. Reply
  • Ryan Smith - Friday, April 22, 2016 - link

    We had a call with Samsung on Thursday. They were rather explicit about intending to use EUV at 7nm (though obviously they still have challenges to resolve). Reply
  • Anymoore - Friday, April 22, 2016 - link

    It's the same as saying, "we're stopping at 10nm, for now." Reply

Log in

Don't have an account? Sign up now