ASUS Motherboards

As always, ASUS had a strong presence at the show.

First off was the entirely passively-cooled A8N-SLI Premium based on the nForce4 SLI chipset:

The use of a heat pipe to cool the chipset makes a lot of sense, and it ends up being cooler than a fan-based solution. Also note that the selector card has been ditched in favor of IC based switching.

On the rear I/O panel you will notice that there is a red external SATA port underneath the first two USB ports. External SATA is becoming increasingly more popular on motherboards these days.

ASUS also showcased a BTX form factor nForce4 SLI Intel Edition motherboard:

The final board we saw from ASUS was a dual Opteron board based on the nForce4 Professional chipset. ASUS indicated that the board would also have overclocking options, for those of you interested in Opteron workstation overclocking.

Impressive Cooling from Zalman ABIT's nForce4 SLI Fatal1ty
Comments Locked

53 Comments

View All Comments

  • Tanstafl - Tuesday, June 7, 2005 - link

    #52, the reason they chose to use a PCI slot is most likely because that allows them to use standby power to retain the content of the RAM drive. If you check what's been written about the Gigabyte RAM disk card you will find that the battery is only used when the machine is unplugged, or when there is a power outage.
  • erwos - Friday, June 3, 2005 - link

    "#50, yeah there is another purpose other than power. The PCI slot holds the card in place so it doesn't rock around inside your tower. :)"

    Again, you don't need a PCI slot for that. A mounting bracket would solve that just fine, and possibly even give me room for two in a single 5.25 bay. It's solid state - the thing isn't going to move.
  • mlittl3 - Thursday, June 2, 2005 - link

    #50, yeah there is another purpose other than power. The PCI slot holds the card in place so it doesn't rock around inside your tower. :)
  • erwos - Thursday, June 2, 2005 - link

    My _theory_ is that the PCI bus is used for something other than just power. Maybe some kind of configuration and/or debugging. I find it tough to believe they made this thing use PCI for power alone, because a simple 4-pin would have solved that pretty easily.

    -Erwos
  • KayKay - Thursday, June 2, 2005 - link

    Wow, this was an excellent article, one of the best i've seen to date.

    AGP and PCI-E on the same board, don't see much of that, but im sure people out there would appreciate it if it was widely available
  • nserra - Thursday, June 2, 2005 - link

    #40 What are you talking about I have been installing PC's with ASrock boards (K8 Combo-Z and K8Upgrade-1689) and all super stable and fast (boot time records!!!). I have to say that these are all much faster than the asus boards that I was installing (K8V SE, ...)

    You must have been unlucky, and don’t forget one thing if mobo makers and bios makers put the same affords they do on intel chipsets, I doubt that Uli and Sis looked so bad...
  • jiulemoigt - Thursday, June 2, 2005 - link

    this is wrong pik
    http://images.anandtech.com/reviews/tradeshows/200...
    on p9
    http://www.anandtech.com/tradeshows/showdoc.aspx?i...
    there is three dead give aways one which i feel like
    an idiot for missing is the VGA connector and the
    others are the audio jacks are sperated in one pik but not in the cut away and it still supports two ethernet adapters which is also missing in the second pik.
  • Penth - Wednesday, June 1, 2005 - link

    mosoon:

    You are right with your guess that even the newest and fastest SATA drives fail to max out a SATA I connection. I think my Raptor maxes out at about 70-something MB per second. Not even half the capability of the SATA interface.

    I am supremely interested in this card, but I think if I was going to be paying that much per GB, I would wait for a SATA II connection, where the increase in bandwidth would be very apparent with 300MB/s sustained transfers.
  • monsoon - Wednesday, June 1, 2005 - link

    MLITTL3 forgive my ignorance, but how does it come that data transfer through the SATA connector is faster when pumped by the i-RAM instead of a SATA HD ?

    i mean, ok, i understand HD access latency is lower, but shouldn't we already have the SATA BUS at its max if we buy some kick ass SATA HD ?

    or is it that SATA HDs around ( including RAPTORS, etc.. ) come nowhere near the bandwidth possibility of the SATA bus ?

    cordially,
    JOHN

    PS - please bear with my ignorance !!!
  • DanDaManJC - Wednesday, June 1, 2005 - link

    hmmm that ULi mobo, well specifically their chip that allows both agp and pci-express looks awesome!

    I've been waiting around for a solution like that... now all I need is $500 for the rest of the pc... haha *sigh*

Log in

Don't have an account? Sign up now