SuperTalent’s Indilinx Drive: The UltraDrive ME

Just before I left for GDC I got another SSD: SuperTalent’s UltraDrive ME. This is SuperTalent’s Vertex-equivalent, it actually uses the same Indilinx Barefoot controller. As far as I can tell, the drive uses the same firmware as OCZ’s 1275.

While I barely had any time with OCZ’s 1275 firmware, I had even less time with the UltraDrive ME. I ran my iometer random write test to see if this thing performed like the updated Vertex; it did:

Random Write Performance

I spoke to three more manufacturers evaluating the Indilinx Barefoot controller during my time out in the bay area. The only complaints I’ve heard are that Indilinx is a very small company and the Barefoot controller is perhaps priced a little too high. With pressure from additional manufacturers, and as volumes go up, we should see these drives get even more affordable.

FC-Test: Just to Make Sure Final Words and Thanks
Comments Locked

73 Comments

View All Comments

  • landheha - Saturday, July 18, 2009 - link

    The risk I see in all this is putting a windows page file on such a drive that is actually used. Or an Oracle rollback tablespace or redo logfiles. These will get this kind of drive into "used-status" in no time. Not to speak of the 10.000x erase limit.

    As another guy said before, the difference between SLC and MLC is not to be neglected.
  • anactoraaron - Thursday, June 25, 2009 - link

    Something I have noticed under win 7 RC x64 on my laptop is that when running on battery only the system boots up and shuts down faster than when on ac alone. I don't know why yet and this is especially revelant as even with the slightly lesser ssd's - basically non-intel - can improve laptop performance/responsiveness twofold vs. 7200rpm platter hdd's (as shown in the intial x25-m review). As far as the running on battery variable is concerned, my average shut down time on ac power is 17 seconds, and on battery it is 10 seconds (or less). Is there maybe something else going on in windows 7 that is an unknown as of now?
    Yes, after enjoying the initial review of the X25-M I had to spend about an hour to see where my platter hdd stood (and I'm sure I'm not the only one here that did so).
  • vhx - Saturday, June 13, 2009 - link

    Intel X25-M or OCZ Vertex 120?

    The Intel seems to own it at almost everything except a few writing cases. However the theoretical 180 MB/s Write doesn't seem to show up in anything but synthetic benchmarks which STILL makes it even with the X25-M in real world performance. Not to mention the Vertex's seem to still have major performance degradations compared to X25-M's loss.

    What would you all get if you had a choice?
  • Patanjali - Monday, May 4, 2009 - link

    These seem to have a reasonable write io ops/s compared to any of those that cost less than the Intel, and they are coming cheaper all the time. They use a 2nd generation Samsung controller.

    When will Anandtech review them and forget about all these experiments?
  • Gootch - Sunday, April 19, 2009 - link

    As always, my comments to your previous article should have waited until I had read the latest on these drives. However, X25 is the best (for now) and in some cases arguably cheaper/Gb. Once again a great article follow-up.
  • steffi - Thursday, April 16, 2009 - link

    So I managed to use a collegue's Intel PC at work to update the firmware in my X-25M but I've got a couple of questions ...

    1. Did that firmware resolve the NVidia compatibiity such that in the future I can apply the firmware update from my MacBook Pro Unibody NVidia machine?

    2. Did this firmware resolve the Bootcamp issue?

    3. How is it possible to use issue the SECURE_ERASE on a Mac then since it doesn't appear that HDDERASE will work given the need for legacy IDE mode?
  • SpeedDemonAaron - Monday, April 13, 2009 - link

    Thank you so much for your honest and concise articles on SSDs lately! This is the most important hardware change that the tech world has seen in a long time. There are a lot of bits that need to be uncovered so that the public knows what they are getting themselves into. You're doing an outstanding job of protecting the consumer since manufacturers are definitely producing SSD products at the moment with no regard for the consumer!
  • mmoran27 - Monday, April 13, 2009 - link

    Here it is.

    Must be done on Intel system or PC

    http://support.intel.com/support/ssdc/index_update...">http://support.intel.com/support/ssdc/index_update...
  • MadBoris - Monday, April 13, 2009 - link

    PcPer did some test on the new Intel Firmware for the x25-M.
    Fragmentation issue went away but the drive is still to expensive. ;)

    http://pcper.com/article.php?aid=691&type=expe...">http://pcper.com/article.php?aid=691&type=expe...

  • Eri Hyva - Saturday, April 11, 2009 - link



    http://www.ocztechnology.com/products/flash_drives...">http://www.ocztechnology.com/products/f...ives/ocz...

    The change log for firmware:
    "

    Version 0112 (Feb. 2009) (Description: Basic I/O  optimized drive with SMART error logging)
    • Version 1199 (Feb. 2009) (Description: Enhanced performance I/O optimized drive)
    • Internal "write join" was implemented for better performance
    •SMART basic features can be performed without error log monitoring 
    (to reduce overhead of log data collection)
    •ATA power management commands (IDLE, STANDBY, SLEEP) are enabled for compatibility 
    (Actually these are dummy, while SATA based Power Management is fully supported)
    • Supports runtime bad block handling
    •Improved power management
    •Improved NAND handling
    •Enabled PIO mode data transfer
    • Version 1275 (March, 2009) (Description: Improved raid 0 mode performance)
    •Performance is improved when drive is installed on RAID0 mode host
    •Maximum LBA number is modified according to the JEDEC standard 
    • Modifications of internal data structure used by FW (stamp)
    •Improved write joining
    •Improved FPDMA transfer mode 
    • Version 1.10 (April 7, 2009) 
    •Feature Add : TRIM support is added
    •Apple Mac Pro sleep/wake up support added
    • Updater improved 
    •Bad block management function improved 
    "

Log in

Don't have an account? Sign up now