Noise Levels

For many enthusiasts upgrading cooling the goal is maximum stable overclock, and they will live with the inconvenience of a louder system. For other users silence is the most important factor, and these users will forgo maximum overclocking if that increases system noise levels. Those who expect silence to be the domain of high-priced cooling solutions will find the Noctua reputation for silence continues with the NH-U12P. The performance is certainly there, but low noise is not sacrificed to reach those performance goals.


Noise
Level - 6

Noise
Level - 24

The stock Noctua NH-U12P is one of the quietest coolers we have tested so far in our new cooling test bed. This should not be a surprise as Noctua rates the cooler at 19dB(A) at the highest fan speed. All four test results are at the floor of our system noise, and the new test bed system noise floor is equivalent to a suburban bedroom at night in noise level.

When we test with the NF-P12 fan - or fans in push-pull - at their highest speed, the system remains below the noise floor with one or two fans operating. Those who want to use a fanless power supply or mount their power supply in another room can choose two even quieter configurations with the Low-Noise and Ultra-Low-Noise adapters. We did not reach noise levels higher than our variable speed Corsair 620W power supply even with two fans on high, so there is no point in trying to measure even lower and quieter speeds.

If your goal is silence, we are confident the new NF-P12 fan can meet your expectations, even if they are test results in a lab instead of real-world testing. The NH-U12P is virtually silent, even when pushed hard with push-pull fans and massive overclocking

Cooling at Stock Speed Overclocking and Performance Scaling
Comments Locked

51 Comments

View All Comments

  • 7Enigma - Wednesday, April 9, 2008 - link

    ZEROtherm Nirvana NV120 120mm 2-ball UFO Bearing / Transparent CPU Cooler - Retail ($36.00 after rebate)

    With the $10 rebate its the same price as the Arctic Cooler Freezer 7 Pro

    http://www.newegg.com/Product/Product.aspx?Item=N8...">http://www.newegg.com/Product/Product.aspx?Item=N8...
  • coolsmith - Thursday, March 27, 2008 - link

    Just to complement my previous post on this fan

    I should have mentioned that I found leaving the speed setting to

    medium gave the best result for noise verse speed.

    This fan does cost a little bit more than the others but it should

    last a lot longer.
  • coolsmith - Thursday, March 27, 2008 - link

    I installed one as a rear case fan and I'd have to say they are indeed

    quiet and do a good job.

    But I'd have to agree with most the color is a bit of a turn off, but

    since mine is inside the case a really don't mind.

    A well built fan but crappy color .

    If they were to change the color they would probably sell alot

    more of them, for sure.


  • 7Enigma - Tuesday, March 25, 2008 - link

    I have a bit of a problem with the review and conclusion. This heatsink/fan looks to be good, the problem is it seems to be just as good as the:

    Nirvana, Ultra 120, Infinity, Ninja, Ultima90, Tuniq Tower

    all of which are less expensive. By using these "real world results" the test fails to really tell us what is different about the new design of the fan!

    I want to know that at 1/4, 1/2, or full voltage this fan either:

    a. is quieter (better design/aerodynamics)

    b. pushes more air (more efficient/ better design)

    It's great to show in your testbed that it works !great!, the problem is its not really that helpful to a potential buyer wondering WHY its so great.

    During video card reviews this site constantly takes heat from the H-site (we'll remain nameless :) ), on your reviews not being "real-world", and I've always sided with you guys because you are scientifically limiting your variables to give a good indictation of which card is better. But now I feel these heatsink/fan reviews are somewhat falling into the same trap of that other site in providing data points that are not accurate; just rather you can say that the Noctua, Alpine, Freezer 7, Nirvana, Ultra 120 Extreme, Ultima90, and Kama Cross are all below your artificial noise floor. It's the equivalent of testing all of the new video cards at 1024X768 resolution with a 60fps framerate cap in Quake3, they are all going to look like winners!

    What a competent review needs to aim for is removing all variable outside of what is being tested. When your testing video cards, make sure the cpu isn't the bottleneck, when your measuring hard drives, make sure you don't have a mobo/driver issue, and when your measuring heatsinks and fans, make sure that if your not actually checking their stated cfm's for accuracy, at least you are measuring the noise level of the fan.

    My case sits under my desk doing its thing out of sight. If I'm going to throw down $20 for a FAN, a freaking FAN man!, I want to know those pretty shaped blades are actually doing something measurably different and beneficial than a $5-10 one.
  • Wesley Fink - Tuesday, March 25, 2008 - link

    Our noise floor is limited by the Power Supply, which was selected because it is one of the quietest variable fan speed models we could find. That noise level is equivalent to a suburban bedroom at night as pointed out in every recent review. Real world is NOT running a power supply in one room so you can measure noise levels lower than you will ever see in a real system limited by power supply noise. If you want those measurements there are websites devoted to those esoteric numbers and you can find what you seek.

    For our part we did measure the single fan at high speed and the cululative two fans at highest speed in a system with a quiet variable speed power supply and a fanless video card. Both measurements were below our noise floor. All lower speeds with the shunts will be below that and are not measurable in our system.

    The sad fact about the current low noise obsession is that readers see so many low numbers they have lost perspective on what the numbers actually mean. Those screaming for measurements of 10 to 20 dbA should Google a few articles on noise measurement to see what those numbers actually measure and the laboratory needed to accurately measure those low noise levels.

    130 dBA Loud hand clapping at 1 m distance (maximum level)
    120 dBA Whistle at 1 m distance, test run of a jet at 15 m distance
    Threshold of pain, above this fast-acting hearing damage in short action is possible
    115 dBA Take-off sound of planes at 10 m distance
    110 dBA Siren at 10 m distance, frequent sound level in discotheques and close
    to loudspeakers at rock concerts, violin close to the ear of an orchestra
    musicians (maximum level)
    105 dBA Chain saw at 1 m distance, banging car door at 1 m distance (maximum level),
    racing car at 40 m distance, possible level with music head phones
    100 dBA Frequent level with music via head phones, jack hammer at 10 m distance
    95 dBA Loud crying, hand circular saw at 1 m distance
    90 dBA Angle grinder outside at 1 m distance
    Over a duration of 40 hours a week hearing damage is possible
    85 dBA 2-stroke chain-saw at 10 m distance, loud WC flush at 1 m distance
    80 dBA Very loud traffic noise of passing lorries at 7.5 m distance,
    high traffic on an expressway at 25 m distance
    75 dBA Passing car at 7.5 m distance, un-silenced wood shredder at 10 m distance
    70 Small car at 30 mph; 3 meters from a vacuum cleaner.
    65 1 meter from normal conversation. Busy office. About half the people in a large sample will have difficulty sleeping.
    55 Recommended upper limit for large open offices, restaurants, gymnasiums, swimming pools.
    45 Recommended upper limit for homes, hotels, laboratories, libraries, private offices, court rooms.
    40 Quiet office. Recommended upper limit for classrooms, churches, motion picture theaters (without the film soundtrack).
    35 Quiet bedroom.
    25 Countryside on windless day, away from traffic. Sound of breathing at 1m distance.
  • 7Enigma - Wednesday, April 9, 2008 - link

    So then please tell me how this fan is better than any $5 fan? If it doesn't matter if its below the noise floor, I don't know how you can come to the conclusion that its a good product? To me if it performs the same as a $5 fan its overpriced right?
  • marine73 - Tuesday, March 25, 2008 - link

    For those howling for readings in the 10-20dB range the world must be an incredibly noisy place. Ants on the sidewalk sounding like stormtroopers, ducks on a pond sounding like top fuel hydros...not sure how they can even enter a room with a PC running.
  • vajm1234 - Sunday, March 23, 2008 - link

    is there ny possibility of reviewin the new scythe zipang n all.
  • Thorsson - Saturday, March 22, 2008 - link

    The fan shown in the picture on the Installation page doesn't look like the new one to me...
  • Wesley Fink - Sunday, March 23, 2008 - link

    They are both the new fans. Due to the curvature and sweep of the blades it is more difficult to distinguish the notches from the front view. That is why all the "notch" pictures are from the rear of the fan.

Log in

Don't have an account? Sign up now