The SSD industry has been talking about TLC NAND for over three years now. We published our first post, Understanding TLC NAND, back in early 2012, but in three years we have actually seen very little TLC NAND making it to the SSD market. Samsung was an early adopter by introducing the SSD 840 in September 2012, but Samsung has always been a special case as its SSD business is fully vertically integrated. When you design and manufacture everything in-house, it's obvious that you will have a technological advantage when it comes to adopting new technologies.

TLC is tightly linked with both controller technology and NAND production because TLC inherently has a higher error rate, which needs a stronger controller (although admittedly Samsung has had some issues with TLC). The lack of proper controller is the reason why other NAND vendors haven't invested as heavily on TLC as Samsung because Micron, SanDisk and the like have to rely on whatever third party controllers are available on the market. Without a high volume product to put your TLC NAND into, it means that there's no reason to produce TLC in a large scale, which defeats the cost savings that TLC bring. Micron tried to promote its 25nm TLC NAND for a while a few years ago, but it quickly realized that the available SSD controllers aren't capable of creating a reliable product -- at least not one that would bring any cost savings since the drive would need serious over-provisioning for endurance and ECC parity.

Due to the lack of controller support, nobody other than Samsung and SanDisk have a TLC SSD on the market, although SanDisk had to rely on heavy over-provisioning with 5:1 parity ratio since the Marvell controller used in the Ultra II wasn't designed with TLC in mind. Silicon Motion's SM2256 will be the first commercially available controller and firmware combo with TLC support and today we are taking an early look of the platform in the form of a reference design sample. ADATA already announced its SP550 SSD that will be based on the new SM2256 controller and available later in the summer, but given how many OEMs rely on Silicon Motion's controllers nowadays we will likely see a large number of SM2256 based TLC drives entering the market by the end of the year.

Architecturally the SM2256 shares the same core design as its predecessor SM2246EN. The design is modular, which allows Silicon Motion to change parts of the controller without redoing the rest. It features the same single 32-bit Argonaut RISC processor core as the SM2246EN, which is quite unique because we have seen many SSD controller vendors moving towards multi-core ARM architectures. A single custom core obviously brings efficiency gains and we've witnessed those in the SM2246EN, but the downside of such limited CPU power is sustained performance when the controller has to perform garbage collection at the same time as processing host IOs. 

The only dramatic change is in the error correction circuitry as the SM2256 supports Low Density Parity Check (LDPC) error correction codes instead of more common and less powerful BCH ECC. Silicon Motion calls its ECC technology as NANDXtend, and it's a combination of LDPC hard and soft decode along with RAID5-like data recovery. The benefit of having three levels of ECC is performance because LDPC soft decode and recovery from parity both have a relatively noticeable impact on performance and are typically only needed when the drive approaches its end of life (i.e. when the NAND has been cycled a lot). Uncycled NAND has much higher reliability because the tunnel oxide hasn't worn out due to P/E cycles, so only very little ECC is needed and LDPC hard decode is sufficient and also doesn't have a dramatic impact on performance.

Source: usenix

The reason why hard decode is faster than soft decode lies in how the voltage of a cell is sensed. Hard sensing is binary based, so for an SLC cell like in the graph above the cell can be either 1 or 0. However, as you can see, the voltage threshold distributions overlap slightly and that's actually far worse with MLC and TLC since there are more voltage states. In soft sensing the voltage distributions are divided into several segments, which requires more precision and iterations. For example in segment 4 the bit value can be either 1 or 0 as the distributions overlap, so probability algorithms are used to figure out the correct value. To be honest, ECC codes and the way they work are way over my head, but in case you are familiar with ECC and want to learn more, I suggest you simply google LDPC as there are numerous publicly available academic papers that go into more depth about this topic. 

Silicon Motion claims that its NANDXtend technology can extend the endurance of TLC NAND by up to three times, making TLC more robust for heavier workloads and also allowing the use of lower quality NAND that some OEMs may use anyway due to the lack of in-house binning equipment. Unfortunately I didn't have any time to do extended endurance testing with the SM2256 yet to validate Silicon Motion's claims, but I will be sure to test that once we have a retail drive on our hands, 

Silicon Motion SM2256 Specifications
Host Interface SATA 6Gbps
NAND Interface ONFi 3.0, Toggle 2.0 & asynchronous
# of NAND Channels 4
CE per Channel 8
Sequential Read 524MB/s
Sequential Write 400MB/s
4KB Random Read 90K IOPS
4KB Random Write 70K IOPS
Encryption AES-256 & TCG Opal 2.0

The SM2256 has eight chip enablers (CE) per channel, meaning that it can simultaneously talk to up to 32 NAND dies, but one CE can control more than one die, resulting in capacities of up to 2TB with one CE per four dies. 

The engineering sample Silicon Motion sent us uses Samsung's 19nm 128Gbit TLC NAND, which is the same NAND that is found inside the 840 EVO. Samsung doesn't sell its TLC NAND to others in high volume, so we likely won't see this configuration on the market at all. The SM2256 does, of course, support TLC NAND from all other vendors as well (even Toshiba's 15nm).

Like all TLC SSD designs we have seen, Silicon Motion employs SLC caching in the SM2256 to improve performance and endurance. The size of the SLC cache is configurable by the OEM, but generally the cache size is between 3GB and 12GB depending on the capacity of the drive. The OEM can also configurate whether all IOs are cached or just smaller ones (e.g. 16KB and below), but the early stock firmware that our sample shipped with caches all IOs regardless of the size. 

AnandTech 2015 SSD Test System
CPU Intel Core i7-4770K running at 3.5GHz (Turbo & EIST enabled, C-states disabled)
Motherboard ASUS Z97 Deluxe (BIOS 2205)
Chipset Intel Z97
Chipset Drivers Intel 10.0.24+ Intel RST 13.2.4.1000
Memory Corsair Vengeance DDR3-1866 2x8GB (9-10-9-27 2T)
Graphics Intel HD Graphics 4600
Graphics Drivers 15.33.8.64.3345
Desktop Resolution 1920 x 1080
OS Windows 8.1 x64
Performance Consistency
POST A COMMENT

35 Comments

View All Comments

  • Shadow7037932 - Wednesday, June 17, 2015 - link

    The benchmarks seems very lacklustre and similar to much older controllers/SSDs. I know it's still probably not optimized, but unless SSDs using this can REALLY get the price down, I don't see why people won't just go with the older SSDs like. Heck, even new SSDs like the 850 EVO can be had at a very competitive price. Reply
  • watzupken - Wednesday, June 17, 2015 - link

    Having experimented with a couple of value SSDs running the older SM2246EN controller, I feel they are not too bad for the price. For most users, I don't think they will run into much performance issues with these drives and will still enjoy a better user experience than running a mechanical drive. If you are getting a new SSD running an older controller, its likely you won't find it cheaper cause its older. Reply
  • NeatOman - Wednesday, June 17, 2015 - link

    Thats true, but paired with a i3 or anything AMD in which such a small margin when the Systems controller (like in AMD's AM3+'s 990 chipset) is the bottleneck or simply the processing power like with a i3 or lower.

    And i feel the 850 EVO 120gb at $85 is still much more expensive than a SSD you can pick up with almost the same day to day performance for $55. It's like comparing a desktop i5 to a desktop i7 IMO.
    Reply
  • Taneli - Thursday, June 18, 2015 - link

    Everything you write here is just complete garbage. Reply
  • leexgx - Saturday, June 20, 2015 - link

    i agree Reply
  • Ethos Evoss - Wednesday, July 22, 2015 - link

    the new Plextor SSD M6V has Silicon Motion SMI-2246 Reply
  • Sejong - Wednesday, June 17, 2015 - link

    TLC for everyone....this is not a welcome. :( Reply
  • SunLord - Wednesday, June 17, 2015 - link

    TLC is nice for low end low use scenarios but that about it. Reply
  • Flunk - Wednesday, June 17, 2015 - link

    This would have to be really cheap to be interesting. Reply
  • Hulk - Wednesday, June 17, 2015 - link

    My thought exactly. Reply

Log in

Don't have an account? Sign up now