Last year I spent time with one of the first UltraHD monitors to be come out and came away convinced of the benefits. Even though the screen size was not much larger than my usual display, the extra clarity and detail was totally worth it. It sealed my decision to buy a MacBook Pro Retina when it was updated last fall as well. Now we’ve seen the field of UltraHD displays expand considerably and so we now look at another 32” UltraHD display, the Dell UP3214Q.

The Dell UP3214Q is very similar to the ASUS PQ321Q that I looked at last year. Both are 32” and both feature a 3840x2160 resolution. They are also both saddled with one of the current UltraHD weaknesses: a requirement that you have DisplayPort 1.2 MST support to get 60 Hz refresh rates. However, the Dell UP3214Q does have a few higher-end features that the ASUS lacks to help set it apart.

The first feature is that it supports the full AdobeRGB color gamut and not the more limited sRGB gamut. Since these initial UltraHD monitors are expensive and more likely to be used by professionals than home users, this support can go a long way. Second it has built-in support for Dell’s calibration software that lets you set two presets to be whatever settings you desire. If you have day and night settings, or different settings for online vs. print, this can be accomplished.

It also offers a larger selection of inputs than the ASUS model. With HDMI 1.4, DisplayPort, and MiniDisplayPort options you can connect it to two 60Hz UltraHD sources at once instead of just a single PC. This is most useful for those that wish to use it with a laptop as well as a desktop. Like many of the upper-end Dell displays it also features a 4-port USB 3.0 hub as well as a media card reader on the side. Unfortunately all of the USB 3.0 ports are hard to access on the rear instead of placing a pair on the side. I swap out my monitors more than 99.9% of the population but I hate having the USB ports being so hard to access.

The updated Dell design features a metal trim around the border which gives it a modern, semi-industrial look and also seems to work as a way to dissipate heat. I found this out as trying to adjust the monitor from the top after it has been on for a few hours can cause it to get quite warm. An IR temperature gun gave me readings of almost 130F. I’ve had monitors get warm to the touch before but the Dell UP3214Q is certainly the hottest so far, and that's quite surprising considering it uses LED backlighting. The stand that the Dell includes is also a new industrial design but still includes height adjustment, tilt, swivel and a way to route cables. There is no pivot so if you want to use your 32” UltraHD display in Portrait mode you’ll need to use the 100mm VESA mounts with a different stand.

Dell also has their on-screen menu system that I still think is the best in the business. They’ve made an unfortunate move to touch-sensitive buttons but the overall user interface is still the same. From an ergonomics perspective the Dell is an overall winner. I’d like to see them find a way to side-mount the inputs so they are easier to access, and move a couple USB ports around, but overall it is good.

Viewing angles, as an IPS display, are fantastic. I’d be hesitant about a TN panel of this size because off-angle issues could arise far too easily but it is not a problem with the Dell. With specs, ergonomics, and the on-screen display of the Dell UP3214Q there is not much that I find issue with...well, other than a high price, but that's expected.

Dell UP3214Q
Video Inputs HDMI 1.4a, DisplayPort, Mini DisplayPort
Panel Type IGZO IPS
Pixel Pitch 0.182mm
Colors 1.07 Billion
Brightness 350 cd/m2
Contrast Ratio 1000:1
Response Time 8ms GtG
Viewable Size 32"
Resolution 3840x2160
Viewing Angle (H/V) 176 / 176
Backlight LED
Power Consumption (operation) 100W Typical, 170W Max
Power Consumption (standby) 1.2W Typical
Screen Treatment Anti-Glare
Height-Adjustable Yes, 3.5"
Tilt Yes
Pivot No
Swivel Yes
VESA Wall Mounting Yes, 100mm
Dimensions w/ Base (WxHxD) 29.5" x 19" x 8.4"
Weight 20.3 lbs.
Additional Features 4 port USB 3.0 hub, card reader
Limited Warranty 3 years
Accessories MiniDP to DP Cable, USB 3.0 cable, power cord
Price $3,499 (Currently $2800)

 

UltraHD Today: Still Not There
POST A COMMENT

85 Comments

View All Comments

  • Kevin G - Tuesday, April 01, 2014 - link

    On the Windows site of things, what video card and driver was used? How AMD and nVidia handle MST support varies slightly so you might have better luck with one over the other. Reply
  • Samus - Tuesday, April 01, 2014 - link

    Wow, $2800 bucks...you can have a whole WALL of ZR2740w's for that price. Reply
  • nathanddrews - Tuesday, April 01, 2014 - link

    ... or a wall of U28D590D for $699 each. 60Hz TN 4K. I'm glad to see the major players offer up affordable 60Hz 4K. Of course, I'd rather have 120Hz 4K DP1.3. Doesn't matter if you can't play games, it would be of tremendous value to me just for desktop operations. Reply
  • Gunbuster - Tuesday, April 01, 2014 - link

    Or you could run 4 39" 4K's at 1080p 120hz in multi-monitor and still have 4k resolution and some change left over...

    Bad pricing is bad.
    Reply
  • WithoutWeakness - Tuesday, April 01, 2014 - link

    If I'm correct in assuming you're talking about the 39" Seiko TV then I must inform you that those are not 120Hz screens in the same sense that a computer monitor is 120Hz. Those Seiko TV's only take an HDMI input which is currently limited to 4K@30Hz. They then interpolate frames between frames of source material to give the illusion of 120Hz. A 120Hz monitor takes in a 120Hz signal and displays it natively. There are currently no 4K 120Hz monitors on the market (there aren't even any 2560x1600 120Hz monitors I'm aware of). Reply
  • nathanddrews - Tuesday, April 01, 2014 - link

    The 50" Seiki 4K TVs do native 120Hz 1080p over HDMI 1.4, but it seems to be a lottery as to whether it needs to be hacked or not. While this resolution is not officially supported, creating a custom EDID makes it possible. In addition, several people have been loading the 50" firmware on the 39", making native 120Hz 1080p possible there as well. So you can have your desktop and videos at 30Hz 4K (not ideal, but still razor sharp) while also gaming at 120Hz 1080p. Some are claiming 720p at native 240Hz... but I'd have to see that to believe it.

    http://www.avsforum.com/t/1473728/official-seiki-s...
    Reply
  • houkouonchi - Friday, April 04, 2014 - link

    All seiki 50 inch displays will natively display 1080p@120Hz. The 39 inch models all will to (with a firmware update). The 39 inch monitors with the firmware update do pixel doubling which means ideal scaling for gaming (almost identical to gaming on a big 1080p display with no scaling artifacts).

    Both the 50 inch (and 39 with the right firmware) will accept 720p@240Hz. It sitll only displays 120Hz but this does halve the input lag from around 9ms to 4.5 ms which is why for games where it really matters (only quakelive for me) I ran at 1280x720@240Hz.
    Reply
  • dave_rosenthal - Tuesday, April 01, 2014 - link

    Actually, the 39" inch Seiko *does* accept 1080@120hz over hdmi (when flashed with the firmware from 50" Seiko) and output all individual 120 frames per second (it looks very smooth!). You're right that it's limited to 4k@30hz. Reply
  • inighthawki - Tuesday, April 01, 2014 - link

    Enjoy your massive bezel and spanning content across monitors. Reply
  • Samus - Tuesday, April 01, 2014 - link

    For <$400 and 2560x1440, I'll take a thick (matte finish) bezel with an IPS panel. Infact, I'll take 6 of them and keep the change instead of buying a "Dell"

    Samsung just announced a direct-competitor to this monitor for $800 starting price. So maybe just 3 of those and keep the change, and they have a razor thin bezel and aluminum frame construction.

    I mean...I just can't get over the price here. $2800 bucks. It's not even worth $1000.
    Reply

Log in

Don't have an account? Sign up now