Testing Methodology

For testing Micro-ATX and full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.

ATX Test Configuration
CPU Intel Core i7-2700K
(95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V)
Motherboard Gigabyte GA-Z68MX-UD2H-B3
Graphics Card ASUS GeForce GTX 560 Ti DCII TOP
(tested at stock speed and overclocked to 1GHz/overvolted to 1.13V)
Memory 2x2GB Crucial Ballistix Smart Tracer DDR3-1600
Drives Kingston SSDNow V+ 100 64GB SSD
Samsung 5.25" BD-ROM/DVDRW Drive
CPU Cooler Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400
Power Supply SilverStone Strider Plus 750W 80 Plus Silver

Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.

Thank You!

Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.

Assembling the Antec GX700 Noise and Thermal Testing, Stock
Comments Locked

33 Comments

View All Comments

  • headbox - Thursday, January 17, 2013 - link

    The catch: uglier than Hillary Clinton in a thong.

    It's 2013. So much more can be done with plastic than this. When it comes down to it, "how it looks" is one of the main factors in choosing a case.
  • The Von Matrices - Thursday, January 17, 2013 - link

    I haven't yet seen a case that pulls off a military/camo theme. I wish manufacturers would just stick to solid colors.
  • StevoLincolnite - Friday, January 18, 2013 - link

    I personally think the Corsair C70 gets close to the military theme.
    But they could do a bit more like release a digital camo or multicam version, lots of enthusiasts would eat it up as they don't have to pull out the spray cans.

    Oh and a decent Corsair PSU and fan controller that matches the theme/colours would be perfect, we already Gold Corsair Vengeance memory and the Asus Sabertooth motherboards that match colour wise.
  • ac2 - Friday, January 18, 2013 - link

    Don't worry, you don't need to sleep with it...

    Want to change my el cheapo case, but for ME this one won't work... Kid managed to spill a glass of water over existing case, luckily it doesn't have a top vent so all is well...

    Now which good case can I get that doesn't have a top vent I wonder... Most of the good Antec, Corsair and Bitfenix ones seem to be ruled out...
  • Samus - Friday, January 18, 2013 - link

    I don't want to lock it in the cellar like some retarded offspring, either. You need to live with these things. I look at my case every day, and I'm glad its a silverstone. Not everyone can have a 10, though. But everyone should have at least a 6 or 7, and for $50, you can. It just isn't this.
  • ShieTar - Friday, January 18, 2013 - link

    Bitfenix have the Merc Beta, and Antec has the whole "New Solution" line without any top vents. Prices are similar to the 60$ price point too.
  • Blibbax - Friday, January 18, 2013 - link

    Fractal Core 1000?
  • infoilrator - Saturday, January 19, 2013 - link

    Fractal Core 1000 is good for what it is, a cheap mATX case, but it does have compromises. Not in love with verticle HHD mounts, among others.
    Wonder why Lian Li doesn't get mentioned (price probably).
  • danjw - Friday, January 18, 2013 - link

    Put it on top of the desk. Top vents are very common in cases these days; You will have trouble finding one that doesn't have on. I actually think Antec hit a home run. It is light, so easy to move around. It hits a very low price point. I couldn't care less about front audio headers; I prefer USB headsets for voice and speakers for everything else. I am more concerned with functionality then I am with looks. This case gets the job done, just don't go kicking or hitting it. As light as it is, it shouldn't be a problem to carry in a way that doesn't do it harm.

    I currently have a P180 case, and it is hell to work in. I just swapped a Core2Quad for a new Ivy Bridge Z77 system. I had scrapped up both my hands pretty good just getting the thing put together. I hated working in the case; I wouldn't mind babying a case a bit, if I didn't have to deal with the wiring hell I had with the P180. Sure, it doesn't have the sound dampening of the P180, but I usually am playing music, so it doesn't matter.
  • bigboxes - Tuesday, January 29, 2013 - link

    Yeah, but Antec made improvements in all that you say with the P180b, P182 and P183.

Log in

Don't have an account? Sign up now