ASUS Republic of Gamers and X79 ROG Review – Rampage IV Gene, Formula and Extreme
by Ian Cutress on August 3, 2012 1:00 PM EST- Posted in
- Motherboards
- Asus
- X79
- ROG
Rampage IV Gene In The Box
The Gene, being the 'entry level ROG' product, gets the minimal set of extras compared to the rest of the series.
6 SATA Cables
Rear IO Shield
User Guide
Driver CD
ROG Connect Guide
SLI Bridge
Q-Connectors
ROG Connect Cable
Board Features
| ASUS Rampage IV Gene | |
| Price | Link to Newegg |
| Size | MicroATX |
| CPU Interface | LGA2011 |
| Chipset | Intel X79 |
| Power Delivery | Intel Second Generation Core i7 Sandy Bridge E |
| Memory Slots |
Four DDR3 DIMM slots supporting up to 32 GB Up to Quad Channel DDR3, 1066-2400 MHz |
| Onboard LAN | Intel |
| Onboard Audio | SupremeFX III |
| Expansion Slots |
2 x PCIe Gen 3 x16 1 x PCIe Gen 3 x8 1 x PCIe x1 |
| Onboard SATA/RAID |
2 Intel SATA 6 Gbps, supporting RAID 0, 1, 5, 10 3 Intel SATA 3 Gbps, supporting RAID 0, 1, 5, 10 2 ASMedia SATA 6 Gbps |
| USB |
4 ASMedia USB 3.0 (2 back panel, 2 from headers) 12 Intel USB 2.0 (8 back panel, 4 from headers) |
| Onboard |
1 x USB 3.0 Header 2 x USB 2.0 Headers 4 x SATA 6 Gbps 3 x SATA 3 Gbps 5 x Fan Headers 1 x SPDIF Out Header 11 x Measurement Points Power/Reset Buttons Clear CMOS Button Go Button |
| Power Connectors |
24-Pin ATX Power Connector 8-Pin 12V CPU Power Connector |
| Fan Headers |
2 x CPU Fan Headers 3 x Chassis Fan Headers |
| IO Panel |
1 x PS/2 Combination Port 1 x eSATA 3 Gbps 1 x Gigabit Ethernet 2 x USB 3.0 8 x USB 2.0 1 x Optical S/PDIF Output 6 x Audio Jacks 1 x Clear CMOS Button 1 x ROG Connect |
| Warranty Period | 3 Years with ASUS Premium Service |
| Product Page | Link |
With a board such as the Gene, a high end NIC is expected. The audio is improved over standard Realtek for a gaming product, and having five full fan headers, all fully adjustable, is a nice addition. We also have Q-LED, which allows users to see any particular boot-up issues without dissecting a debug code, voltage read-points for enthusiasts, the Mem-OK Button to recover SPD memory timings, a Go Button for instant pre-selected overclocks, and gold plated audio connectors on the IO.
Facebook
Twitter
RSS
34 Comments
View All Comments
jontech - Friday, August 3, 2012 - link
But sounds kind of cool,.Helps that Asus makes it :)
Paulman - Friday, August 3, 2012 - link
Asus Republic of Gamers also holds Starcraft tournaments, as well! That's how I first heard of their brand. In fact, the ASUS ROG Starcraft II Summer 2012 tournament is on right now and I'm watching a game vs. EG.IdrA and EG.Puma (same team, but one American teammate versus a Korean teammate).For more info on this tourney, see: http://rog.asus.com/142982012/gaming/join-the-rog-...
primeval - Friday, August 3, 2012 - link
A fun tournament thus far.For the branding portion of this article, I highly recommend checking out some of ASUS ROG's commercials. They have been playing throughout the aforementioned tournament and I have to say they are probably the best hardware commercials I have ever seen in terms of production quality. I think that if you see a few of those commercials, you may be able to further rationalize the branding award.
Meaker10 - Friday, August 3, 2012 - link
1x/16x/8x/16x would kill any dual card setup in a micro atx case, kinda defeating the point....just4U - Friday, August 3, 2012 - link
the 8x slot is rather pointless...danjw - Friday, August 3, 2012 - link
I would rather see an article on the Ivybridge ROG motherboards then the Sandybridge-E ones. These are very niche boards, though I guess that is only slightly less true of the Ivybridge boards. For heavily threaded and memory intensive applications Sandybridge-E will win. But not really on much else, though they are chosen by some just because they are the most expensive.StevoLincolnite - Friday, August 3, 2012 - link
Also, Sandy Bridge overclocks higher and throws out less heat, because of the silly design choice that Intel made in regards to the heat spreader compound.Not a problem for those who are up to the task of removing the IHS or lapping.
Sad part is that Ivy Bridge actually has nice thermals and power consumption at stock; which could have translated well for enthusiasts.
IvyBridge-E should be out within the next year, haswell will get released and the cycle shall continue.
Hopefully we get 8 core Ivybridge-E chips, which is severely lacking on the Socket 2011 platform with the 3930K's being die harvested 8 core chips, plus most socket 2011 motherboards will take an Ivybridge-e chip anyway, when they're released.
danjw - Friday, August 3, 2012 - link
I was just looking at "leaked" slide that shows Ivy Bridge-E out in Q3 2013 and Haswell out in Q2 2013. I really don't see what the point is of an Ivy Bridge-E if Haswell beats it to the market. With Sandy Bridge-E they released it before the Ivy Bridge tock. I just don't see why that would make much sense.Assimilator87 - Saturday, August 4, 2012 - link
Haswell will probably be limited to four cores, whereas Ivy Bridge-E will scale up to ten cores.mapesdhs - Wednesday, May 9, 2018 - link
I was hunting for R4E refs and found this. It's strange reading what people expected was going to happen back when the R4E was new. IB-E with 10 cores eh? Oh well. Mind you, that did happen with IB-EP, and infact the XEON E5-2680 v2 is one of the best upgrades one can do for an X79 mbd, at least for threaded performance anyway. Hard to avoid wondering how things would have panned out if the 3930K had simply been a fully functional 8-core in the first place, instead of the crippled sampled chip consumers were offered. However, I obtained quite a few, and they still work pretty well, especially with so many PCIe lanes to play with, and it's cool being able to use a 950 Pro to boot from NVMe (comes with its own boot ROM), though the ROG forum does have a thread with custom BIOS profiles available to add native NVMe boot support to various ASUS mbds.