Introducing the Antec Solo II

When we reviewed Antec's Sonata IV recently, we found it left a lot to be desired. Antec had updated their Sonata design, but barely, and the enclosure as a whole felt grossly behind the times. Apparently some of Antec's engineers agreed, because we have the brand new Solo II in house now and there's clearly been some serious retooling. But is the Solo II enough of a step forward, or does it still have some growing up to do?

Externally the Solo II doesn't look like a massive evolution of the previous generation of Solo cases (which Antec considers part of their Sonata family of enclosures). That's not really an issue: while the appearances of Antec's gaming enclosures may be the subject of some debate, the Sonata line has always been attractive and understated without looking particularly chintzy or cheap. But looks can be deceiving, and the inside of the Solo II looks less like a traditional enclosure and more like a laboratory where Antec's engineers have begun experimenting with new (and old) approaches to case design.

Antec Solo II Specifications
Motherboard Form Factor ATX, Micro ATX, Mini ITX
Drive Bays External 2x 5.25"
Internal 3x 3.5"/2.5" or 2x 3.5" with suspension mounting; 1x 2.5"
Cooling Front 2x 120mm intake fan mounts
Rear 1x 120mm Antec TrueQuiet exhaust fan
Top -
Side -
Bottom -
Expansion Slots 7
Front I/O Port 2x USB 2.0, 2x USB 3.0, mic and headphone jacks
Top I/O Port -
Power Supply Size ATX
Clearance 15" (Expansion Cards), 180mm (CPU HSF), 240mm (PSU)
Weight 20.2 lbs. (9.1 kg)
Dimensions 17.3" x 8.1" x 18.5" (440mm x 205mm x 470mm)
Price $129 MSRP

What isn't mentioned in the spec sheet is that Antec has also included soundproofing on the side panels, soundproofing that would've helped the Sonata IV perform better acoustically. There are thin sheets of polycarbonate attached to the insides of the top and side panels in a way that doesn't add heft or thickness but can introduce a notable improvement in noise.

In and Around the Antec Solo II
POST A COMMENT

59 Comments

View All Comments

  • gevorg - Tuesday, September 06, 2011 - link

    "I also think Antec is having the same problem with the Solo II they had with the Sonata IV: it's priced right out of competition. At $129 it just doesn't make sense."

    It makes sense to people who value silent computing. With the right part selection you can have a powerful computer that is also very quiet and that what makes Solo superb even at $200 price point. Comparing Solo to Sonata is like comparing apple to an orange. Key word: part selection. A proper review with anechoic chamber measurements would show a clearer picture.
    Reply
  • zero2dash - Tuesday, September 06, 2011 - link

    @ $120 the Solo II is (IMHO) grossly overpriced.
    @ $200 it's highway robbery and anyone who would buy a Solo at that price point deserves to get ripped off.

    If I have $200 and it HAS to be spent on an Antec case, I'd get one of the 18x variants. Otherwise, I'd go with another brand name.
    Reply
  • knedle - Tuesday, September 06, 2011 - link

    I agree, I have Antec NSK2480 for years and I didn't buy it because it was fancy, featured some neat mounting system or whatever else.
    I bought it because it looked simple, and was made of thick steel, that helps to make my computer quiet.
    Nothing else counts for me, and that enclosure is doing great job for me... Oh wait, I had to turn off all the blue LEDs on it, because I hate them. ;)
    Reply
  • pvdw - Tuesday, September 06, 2011 - link

    Anandtech just doesn't have the facilities for a proper sound related review of hardware. For that SPCR is a better place to go. If quietness is a priority then that's the place to go for reviews. I've found that their case reviews are better than those here. I'm sure they'll review this case and I look forward to hearing their input.

    BTW, I have the Solo, and it's a great case! It has it's little foibles, but it's significantly cut down on noise in my office.

    As far as tool-less design is concerned, remember that a case like the Solo is geared towards noise reduction. It's possible that some of the tool-less designs lead to extra vibration. Or maybe Antec were just cutting corners.The suspension straps are just the best at reducing HDD vibration transfer.
    Reply
  • gevorg - Tuesday, September 06, 2011 - link

    "Anandtech just doesn't have the facilities for a proper sound related review of hardware. For that SPCR is a better place to go."

    If Anandtech can't do a proper review, they shouldn't jump to silly conclusions that Solo "at $129 it just doesn't make sense". Not everything is made for overclockers, storage servers and HTPC.
    Reply
  • Dustin Sklavos - Tuesday, September 06, 2011 - link

    I stand by my conclusions.

    Just because we can't invest in a custom built anechoic chamber that produces noise level results which border on academic for 90% of end users, I'm somehow not qualified to be doing these?
    Reply
  • davegravy - Tuesday, September 06, 2011 - link

    Acoustic Engineer here.

    Results can be significantly skewed by not measuring in an anechoic environment due to room modes. We're talking on the order of several dB.

    Your measurements may still be useful for comparison purposes, provided your transducer location and the location of equipment under test is EXACTLY the same for each measurement. In this case, one should not compare Anantech's results with other published results.
    Reply
  • Dustin Sklavos - Tuesday, September 06, 2011 - link

    That's basically it. I'm confident that my results are comparable within their own ranks. Reply
  • dhanson8652 - Tuesday, September 06, 2011 - link

    I think this is a fair review. I have no major problem with this review and I've been a SPCR regular for almost a decade.

    Suspension was a big deal with traditional 7200 RPM drives back in the day. With SSDs taking over it becomes less and less of an issue. I'd be fine with suspension taken out of the Solo if it dropped the cost and that was reflected in a lower price for the consumer.

    The biggest negative you didn't mention is the power button / reset switch is pretty cheaply made. See the picture in page two of this thread http://www.silentpcreview.com/forums/viewtopic.php... I've seen ham-fisted users bust the power button on a Solo and I've had to fix them so it's not an issue I'll quickly forget.

    The one thing that I didn't know before reading this review is that the support bar is removable. There have been some on SPCR that have cut the bar away in the original Solo so having it easily removed/replaced without damaging the cases resale value is a plus.

    On the topic of intake the lack of intake fan, considering Yate Loon 120mm fans are only $3 retail (less for someone like Antec to buy in bulk) It'd be very easy to up the included fan count by one if they are going to keep the price that high. As is die hard SPCR types don't use front fans.
    Reply
  • leoc - Saturday, December 28, 2013 - link

    The really important difference between this review and the SPCR one isn't the precision of the noise recordings. It's that when SPCR found the stock Solo II struggling under load with a mid-range GPU they went ahead, put in a 120mm intake fan and retested. Apparently the Solo II was not only much cooler but quieter with the second fan while under load. Now it would be very fair to slate the expense of what's arguably a $15 hidden extra on the price of a $130 case, but it's faintly absurd not to confirm that the case works well in a two-fan configuration. I understand the desire to review the item as delivered and not to consider esoteric modifications, but throwing in a 120mm Nexus is not exactly drilling holes: it's a ridiculously straightforward and obvious option when self-building a desktop PC for superior noise *or* cooling performance. Reply

Log in

Don't have an account? Sign up now