Gaming and 3D performance

Far Cry 2

Featuring fantastic visuals courtesy of the Dunia Engine, this game also features one of the most impressive benchmark tools we have seen in a PC game. For single GPU results we set the performance feature set to Very High, graphics to High, and enable DX10 with 2xAA.

Gaming Performance - Far Cry 2 - CPU @ Stock

Gaming Performance - Far Cry 2 - CPU @ 4GHz

Not a great show here from AMD in comparison to the Intel counterparts, but playable nevertheless.


Warhammer 40K: Dawn of War II

We are big fans of the Warhammer franchise, especially Dawn of War II. One of the latest RTS games in our library is also one of the more demanding titles on both the CPU and GPU. We crank all options to Ultra, enable AA, and then run the built-in performance benchmark for our result.

Gaming Performance - Dawn Of War II - Stock CPU Speed

Gaming Performance - Dawn Of War II - CPU @ 4GHz

Things are a bit better in Warhammer, with AMD a shade behind the standard.


AutoCAD 2010 x64—Cadalyst 2008

We utilize AutoCAD 2010 x64 and the Cadalyst Labs 5 benchmark.

Application Performance - AutoCAD 2010 x64 - CPU @ Stock

We were expecting a bit of a better standing for AMD’s HD 4290 IGP in the Cadalyst benchmark but it appears Intel’s processor crunching advantage and bus I/O performance keeps things on a near even keel with the i3 540.

Test Setup and Power System Benchmarks
POST A COMMENT

46 Comments

View All Comments

  • ReaM - Friday, March 26, 2010 - link

    I don't know why you people say "I don't like AMD"

    Now tell me, have you ever been satisfied with intel's performance? I have never been. Since my 1400 thunderbird :P I am with AMD. Unlike the p4 3000 Northwood, it did not have fps drops in counter strike. I had to overclock the northwood to 3.4 to play it decently.

    Then I had a Venice 3000+ that would run at 2.8ghz from 1.8 base. I still have it.

    And still today, in games AMD beats the more expensive i5 750. How many of the market will use i5 750's benefits? Almost noone! People really need to look and see that the best bang for buck is AMD. Cheap Boards, Cheap CPUs, and in summer RAM prices are expected to drop. It will be a 200 dolla upgrade to a quadcore if you have PSU and a case already.

    I have just bought i7 860 yesterday (i got it real cheap, I wanted the 920) with p55m ud2 Gigabyte and gskill 4gb 1600 cl7 ONLY because I need the render faster in Maya. I just have no choice here, because AMD does not seem to be the renderer's choice.

    It is bad to have no choice, because there is not direct competition between the two, but often I do not understand why many mainstream people get i7 920 for gaming. Because they don't care how much they spend?

    I am also forced to choose Quadro over FireGL, but that's another story. Radeon since 4xxx series is SICK!!! I love ATI and AMD.

    You should not hate AMD, cmon

    But for mainstream user, why i5? Way too expensive
    Reply
  • butdoesitwork - Thursday, March 11, 2010 - link

    Forget speed. Is it safe to be an early adopter?

    1. Does the Linux kernel support this chipset at all yet? Does it need any special boot parameters to work at all? e.g. Do I need to forcibly disable MSI again?

    2. How _well_ does it work? If you copy files over these new-fangled SB850 SATA ports, does it get there correctly? e.g. can you do a linux "diff" to prove that it isn't broken? Are there any strange messages in /var/log/messages?

    Been bitten by this too often in the past. Most recently the cheap JMicron SATA-to-USB bridges found in most external enclosures often caused bus resets and data corruption. May have just hit a similar problem with my board's JMicron eSATA port.
    Reply
  • Taft12 - Thursday, March 11, 2010 - link

    As a Linux user you should be well aware by now that it's never safe to be an early adopter.

    Check the changelogs of the newest kernels.
    Reply
  • Rajinder Gill - Thursday, March 11, 2010 - link

    I have not tested Linux on this platform yet - I find things need a while to settle before everything works properly (that goes for all operating systems). I might give things a whirl on our next review depending upon time constraints. For this article we tested platform compatibility with Windows 7 and found the big problem was with the Sharkoon QuickPort (LucidPort perhaps, although its still up in the air).

    Regards
    Raja
    Reply
  • AceKing - Wednesday, November 10, 2010 - link

    So has anyone tested this with Linux yet? I'm curious to know if there has been any problems. I see the last post on this was in March, which was 7 months ago. Reply
  • bji - Friday, November 19, 2010 - link

    I own one, and it works perfectly in Linux. Onboard video and audio are flawless and well supported in Xorg (no xorg.conf even needed) and ALSA (easy alsaconf setup). I use a Phenom II 1075T and man does it fly. I primarily do software development and 6 thread compiles are just so fast. Even faster than the much more expensive 4 core hyperthreaded Xeon that I have at work.

    The board does do this weird thing where if you power it off before the OS has shut it down completely, when you power it back on it thinks that you have an overclocking problem (probably detects an incomplete shutdown and assumes bad overclocking) and requires going into the BIOS and back out to continue the boot. And I don't have any overclocking enabled at all, I just manually set the timings for my memory because the defaults were not right.

    I disable the JMicron SATA RAID and IDE controller though as I don't need them and I never trust anything that JMicron makes. Nor should you.
    Reply
  • caraway - Tuesday, November 30, 2010 - link

    Which kernel and distribution are you using? Reply
  • GeorgeH - Wednesday, March 10, 2010 - link

    Measuring DC power consumption as opposed to AC is a very welcome improvement - hopefully this is Anandtech's new SOP for all reviews.

    The only question I think you should make clear (or clearer, with apologies if I missed it) is if you're measuring and summing the DC power across all of the rails or just on a select few; i.e. are you including HDD, ODD, GPU PCIE, and fan connections in the power consumption figures?
    Reply
  • Rajinder Gill - Wednesday, March 10, 2010 - link

    Hi,

    I'm not adding HDD's/DVD peripherals into the figures. The power figures shown are from all 4 rails - EPS 12V, ATX 12V, 5v and 3.3v. The CPU fan consumption is about 2w and left in. I can make things lot more granular than I have here - but I figure what we're providing at present is enough for reviews like this, unless concentrating on specific areas of consumption (which may be called for at some point).

    regards
    Raja
    Reply
  • GeorgeH - Thursday, March 11, 2010 - link

    I saw that in the 980X article - tell Anand you need a raise. Reply

Log in

Don't have an account? Sign up now